• Console table "K"
- 8 clamping consoles
- 8 pneumatically lowerable longitudinal stops (rear stop row)
- 8 pneumatically lowerable longitudinal stops (centre row of stops)
- 1 pneumatically lowerable side stop ruler
for the right working field
- 1 pneumatically lowerable side stop ruler
for the left working field
- electronic surveillance of all stop cylinders
- 6 Workpiece feeding rails to ease placing of heavy workpieces attached to the side of the consoles 1, 3 ,4,5,6 and 8
- LED displays for fast, simple positioning of vacuum clamps and consoles.
Chip conveyor belt integrated in the machine frame
work table:
- X = 4500 mm
- Y = 1500 mm
- Z = 125 mm.
• Drilling head 31 spindles( 21 vertical/ 10 horizontal)
- 1 motor 2,3 kW, frequency controlled Speed 1500 - 7500 1/min
- 10spindles vertical in X-direction
- 11 spindles vertical in Y-direction
- 6 spindles horizontal drilling in X direction
- 4 spindles horizontal drilling in Y-direction
- grooving saw 125 mm 0°- 90° rotatable
• main spindle 12 kW HSK 63
- Speed 1.250 - 24.000 rpm
360° Interpolating C axis with Flex 5 interface
Two separate Z axes for drilling head and working spindle
• 14-fold tool changer moving in X-direction
• 14-fold tool changer located at the side of the machine with
• integrated Tool loading station for loading the tool changers
FLEX5 sawing, trimming and drilling unit
with automatic angle adjustment and automatic tool change
Swiveling sawing/drilling and trimming unit
For saw cuts at an angle of 0° to 90° and bore holes or trimming at an angle of 0° (vertical) to 100° (horizontal)
suction cups:
- 8 pcs. 155 x 110 mm
- 2 pcs. 50 x 120 mm
- 2 pcs. 125 x 75 mm crosswise
- 3 pcs. 125 x 75 mm lengthwise
- 3 pcs. 135 x 110 mm
The tools shown in the tool changer and drilling head are not included in the scope of delivery
Zobrazit překlad