Desbarbadora de chapa con procesado de doble cara ARKU EdgeBreaker 4000 Plus

The deburring machine fulfills the following functions:

• Removing burrs from workpieces
• Rounding of the workpiece edges

• Machine number: M 704044
• Running time 12/2019 to 12/2023
• Operating hours automatic operation approx. 5600 h 
• Passage width 1300 mm
• Passage height 940 ± 30 mm

Total connected loads:

• Voltage 3 x 400 VAC +PE
• Frequency 50 Hz
• Control voltage 24 VDC
• Power consumption 25 kW
• Current consumption 51 A
• Main fuse 63 A

Material data:

• Material: steel/steel alloys, stainless steel, aluminum/aluminum alloys, titanium, copper, foiled material
• Shape tolerance: The shape tolerances for thickness comply with the EN standard
• Deburring unit: Min. material thickness: 3.0 mm, max. material thickness: 100.0 mm
• Burring unit: Min. material thickness: 0.8 mm, max. material thickness: 100.0 mm
• Max. Workpiece weight: 250 kg/m
• Min. workpiece length in throughfeed direction with part thickness > 3 mm: 150 mm
• Min. workpiece length in throughfeed direction with part thickness ≤ 3 mm: 200 mm
• Max. Workpiece length in throughfeed direction approx. 300 mm + length of auxiliary conveyor
• Min. workpiece width 40 mm and ≥ part thickness
• Max. Workpiece width 1300 mm

Speed:

• variable from 0.2 to 6.0 m/min

Space requirement:

• EdgeBreaker 2900 x 2150 x 2300 mm³
• Additional conveyor belts 2110 x 1500 x 950 mm³

• Including two side conveyors (each ca. 2 m)
• Including machine documentation
• without extraction system
• without abrasives
• Automatic sanding block measurement (calibration unit) defective, but not necessarily required for operation!