подходяща машина - предложения BRANDT KD 88 FQ Кантослепваща машина

Surplex - толкова е лесно да наддаваш!
Регистрация
Избери търг
Предложи
Открийте повече
Три начина за успешна продажба!
Покупка
Търг
Маркетинг
Открийте повече

BRANDT KD 88 FQ Кантослепваща машина

Този артикул е във Вашия списък за наблюдение
BRANDT KD 88 FQ kantoslepvascha mashina
BRANDT KD 88 FQ КАНТОСЛЕПВАЩА МАШИНА
ПРОДАДЕНО
   

Съжаляваме, но тази машина е вече продадена

Намери подобни налични машини

Разходи и услуги

Такса за търга   0%
ДДС   *плюс ДДС
Условия за доставка   натоварен на камион
Разходи по транспорта   не са включени
Условия на плащане   100% плащане преди вземане

Детайли за машината

Име   BRANDT KD 88 FQ Кантослепваща машина
Машина №   224362
Производител   BRANDT
Модел / Вид   KD 88 FQ
Дата на производство   1998
Машината е достъпна от   immediately
Качество на машината   непроверена
Местоположение на машината   12040 Marene CN, Italien

Технически детайли

Приблизителни размери   7500 x 2300 x 1900 mm
Приблизително тегло   3000 kg

Описание

EDGE BANDER SINGLE SIDED. , GENERAL SPECIFICATIONS, Max. working panel height with straight edge 55 mm, Applicable banding material in coils: thin edge and PVC up to 3 mm, Applicable banding material in strips: solid wood up to 12 mm , SYSTEM AND OPTIONALS OF THE PANEL HANDLING, Running driving chain, Top pression unit made by lines of idle wheels, Top pression unit with adjustable height in automatic by numerical control, Fixed feeding speed 13 m/min, Input panel guide is motorized and with adjusting in automatic by numerical control, Lateral bar with lines of idle wheels to support the panels , WORKING UNITS ON THE SQUARING SIDE, Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2.2 KW ( 12000 RPM) , GLUING UNIT, INSERTION AND PRESSION OF THE EDGE , Support for edge coil, Hot-melt glue pot and premelter , Spreading roller to regulate the quantity of apllied glue, Guillotine to cut the edge in coils, Roller set to press the edge on straight profiles - nr. 1 + 3 pression rollers - motorized regulation of depth position in automatic by numerical control , WORKING UNITS ON THE EDGE BANDING SIDE, End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 / 15 degree - motors power 0.35 KW ( 12000 RPM), Top and bottom rough trimming unit - motors power 0.55 KW ( 12.000 RPM), Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 25 degree - motorized regulation of depth position in automatic by numerical control - motors power 0.55 KW ( 12.000 RPM), Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 25 degree - regulation of the tilting by hand with visual unit - motors power 0.55 KW ( 11300 RPM), Rounding unit - nr. 2 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.4 KW ( 12.000 RPM), Edge scraping unit for the edge superfinishing , Brushing unit with motors to clean and polish the upper and lower edge , CONTROL OF THE MACHINE AND ACCESSORIES, Control and program system NC 16 - visual display - keyboard, Adjustable hanging command board to control the machine , Incorporated electrical cabinet , NORM AND OPTIONAL FOR THE SECURITY, Security norme CE mark, Safety and sound-proof enclosure cabinet of the working units , Aspiration system on the top part of the safety enclosure cabinet, Total installed power 13 KW
Отиди горе