подходяща машина - предложения MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

Surplex - толкова е лесно да наддаваш!
Регистрация
Избери търг
Предложи
Открийте повече
Три начина за успешна продажба!
Покупка
Търг
Маркетинг
Открийте повече

MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

Този артикул е във Вашия списък за наблюдение
MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
MIKRON - AGIECHARMILLES HSM 400 U 5 AXIS MACHINING CENTER
ПРОДАДЕНО
   

Съжаляваме, но тази машина е вече продадена

Намери подобни налични машини

Разходи и услуги

Такса за търга   15%
ДДС   *плюс ДДС
Условия за доставка   натоварен на камион
Цени за демонтаж и товарене   1,600.00 € (обвързващи)
Разходи по транспорта   не са включени
Условия на плащане   100% плащане преди вземане

Детайли за машината

Име   MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
Машина №   214865
Производител   MIKRON - AGIECHARMILLES
Модел / Вид   HSM 400 U
Дата на производство   2008
Машината е достъпна от   immediately
Качество на машината   непроверена
Местоположение на машината   40549 Düsseldorf, Deutschland

Технически детайли

Приблизителни размери   2800 x 2000 x 2700 mm
Приблизително тегло   5500 kg

Описание

Serial No. 107.87.00.204, with rotable tilting table, EROWA ROBOT COMPACT for 60 EROWA pallet spaces. The machine is constructed in portal design and a massive polymer construction guaranteed the introduction of occuring inertia and machining force into the machine frame. This guaranteed highest accuracy of the traverse distance. The moving parts are loaded on linear compact roller guides, which guaranteed a long service life and adhesion motion control as well as for difficult cutting performance. The machine table is performed as large construction. The HSM series is generated for high speed shaping.

Technical details:
- Travel X-axis 400 mm, Y-axis 240 mm, Z-axis 350 mm, B-axis + -110 degrees. C-axis N x 360 degrees
- max. accelerating force X/Y: 10,75/8,35 kN; Z: 4 kN
- rapid traverse rate X/Y/Z: 80 m/min
- spindle speed range 100 - 42.000 rpm
- spindle holder HSK - E 40
- spindle power at 40 % ED 13 kW, spindle power at 100 % ED 10 kW
- turning moment at 60 % ED 4,25, turning moment at 100 % ED 3,2 Nm
- tool changer for 68 tool holder
- chip to chip time VDI 2852 12,5 sek
- tool changer time (TC 36 / 68) 10,0 sek

Equipment:
- ARO paper belt filter system P 750 / 1000 100 l/min with diverse paper reels
- Haidenhain iTNC 530 2P CNC control for 5-axis processing
- EROWA ITS 148 swivel table changer system
- EROWA pallet changing system for 60 pallet spaces (no pallet table is incluced in delivery)
- infrared edge finder, type 4411 32.00
- BURN filtration plant WK 5806 - C 25
- documentation in german language
- chip conveyor
- diverse spare parts in plastic boxes

Dimensions:
- EROWA pallet changer system approx. 1500 kg, 1020 x 2150 x 2700 mm
- chip conveyor approx. 800 kg, 2700 x 800 x 1500 mm
- paper belt filter system approx. 400 kg, 1850 x 1000 x 1350 mm
- filter system approx. 300 kg, 670 x 850 x 1400 mm
- 1 pallet accessories approx. 100 kg, 2100 x 1000 x 400 mm

For further details please have a look at the attached copy of operating instructions and the attached videos. A video was shot in sellers Company, the other one was created after the dismantling.
The machine was taken on 07.15.2015 stock place into operation. The machine control (HEIDENHAIN iTNC 530) examined, tested axis functions in jog mode. The main spindle has not been used to prevent damage (spindle cooling unit without coolant emulsion) in operation. A manual / mechanical inspection of the spindle had apparently no errors. There was no noise, yet determined mechanical / electrical damage in the axle. The technician confirmed that the machine is in a very good condition. On request we will send you a copy of the installation report. Finally the machine was professional pepared for the transport.
Отиди горе