MAZAK MTV-655/60 Vertikální obráběcí centrum

Capacity: 

Table working surface: 1740x650 mm 

Max load on table: 2000 kg 

Table longitudinal travel X-axis: 1500 mm 

Column 

Crosswide travel Y-axis: 650 mm 

Spindle head vertical travel Z-axis: 650 mm 

Spindle nose to table top: Min.200-Max.850 mm 

Spindle center to column cover: 665 mm 

Drilling capacity: (S45C): Ø 50 mm 

Tapping capacity: (S45C): M45xP4,5 in pitch 

Milling capacity (S45C): 634 cm3/min 

Spindle unit: 

Spindle unit vertical travel Z-axis: 650 mm 

Spindle taper hole: 7/24 taper N° 50 taper 

Spindle speed: 

Standard: 25 to 6000min-1 1min-1 4-digit S code direct command for 1 min-1 increments 

Spindle motor: 

Type: AC inverter controlled motor 

Output: 18,5 kw (30 min rating) 15,0 kw (continuous rating) 

Table: 

Table working surface: 1740x650 mm 

Table overall dimensions: 1740x650 mm 

T-slots: 

Nominal size (ISO R299): 18 mm 

number of slots: 5 

Distance: 125 mm 

Reference slot:

Center slot 18H8 +0,027/0 mm 

Table loading capacity (evenly loaded): 2000 kg 

Table height from machine bottom: 830 mm 

Automatic Tool Changer: 

number of tools per tool magazine: 30 

Tool selection: Automatic random access to magazine tool pockets in shortest path 

Tool shank: MAS-BT-50 

Max tool diameter: Ø125 mm (with adjacent pockets empty): Ø260 mm 

Max. tool mass (mass includes tool shank and retention knob): 20 kg 

Max. tool length (from taper datum plane): 400 mm 

Max. changing moment of force: 15.7 mm 

Tool changetime (chip- to-chip) (MAS 011-1987): 6,0 s (9,3s when equipped with the ATC door) 

Tool change time (tool- to-tool): 2,4s 

Accuracy (measured values): 

Positioning accuracy with stored pitch error compensation (conforms to JIS B 6336): 

X-axis: +/- 0,01 mm/full length Y-axis: +/-0,005 mm/full length Z-axis: +/-0,005 mm/full length 

Repeatbility: X-Y-Z-axis: +/-0,0015 mm 

Machine dimensions: 

Height from machine bottom: 2943 mm 

Floor space: 4445x4032 mm 

Machine mass: 11000 kg 

Power requirements: 

Electricity: 

Voltage: 3-phase 200/220 VAC +/- 10% 

Frequency: 50/60 Hz +/- 2% 

Total input power requirement 

Standard (MAZATROL FUSION 640 m) (Continuous/30 min. rating): 36,9/41,9 kva 

Pneumatic: 

Air pressure: 0,5MPa 

Air flow rate: Standard model: 200 l/min (ANR) or more 

With cutting air blast: 800 l/min (ANR) or more 

With pallet changer: 400 l/min (ANR) or more 

With pallet changer+cutting air blast: 800 l/min (ANR) or more 

Noise: average sound pressure level at operator's position (varies depending on options): 80dBA or less