Passende Vorschläge zu IDM Idimatic/66 Kantenanleimmaschine

HOMAG Optimat KL 77/A20/S2 Kantenanleimmaschine
0 Gebote
6.500 €
15.12.2016
10:00
HOLZHER SPRINT 1411 K Kantenanleimmaschine
59 Gebote
7.000 €
06.12.2016
09:27
OTT Altantic Kantenanleimmaschine
0 Gebote
5.500 €
15.12.2016
12:23
BRANDT KD 68 Kantenanleimmaschine
10 Gebote
900 €
15.12.2016
10:22
So einfach ist Mitbieten bei Surplex!
Registrieren
Auktion wählen
Mitbieten
jetzt mehr erfahren
Drei Wege zu Ihrem Verkaufserfolg!
Ankauf
Versteigerung
Vermarktung
jetzt mehr erfahren

IDM Idimatic/66 Kantenanleimmaschine

Artikel ist auf Ihrer Beobachtungsliste
IDM Idimatic/66 Kantenanleimmaschine
IDM IDIMATIC/66 KANTENANLEIMMASCHINE
VERKAUFT
   

Diese Maschine ist leider schon verkauft

Ähnliche verfügbare Maschinen entdecken

Kosten und Leistungen

Aufgeld   15%
Mehrwertsteuer   *zzgl. MwSt.
Lieferbedingungen   verladen auf LKW
Demontage- & Verladekosten   400,00 € (bindend)
Transportkosten   nicht enthalten
Zahlungsbedingungen   100% Vorauskasse vor Abholung

Angebotsdetails

Name   IDM Idimatic/66 Kantenanleimmaschine
Art.Nr   185033
Hersteller   IDM
Typ   Idimatic/66
Baujahr   1995
Maschine verfügbar ab   17.11.2014
Maschinenzustand   funktionsfähig
Standort   33070 BUDOIA (PN), Italien

Technische Details

Kantenstärke   0,4 - 5 mm
Werkstückdicke   10 - 50 mm
Werkstückbreite min.   140 mm
Fügefräsaggregat   2 x 2,2 kW
Kappaggregat   2 x 0,35 kW
Abmessungen (LxBxH) ca.   7500 x 1400 x 2400 mm
Gewicht ca.   3800 kg

Maschinenbeschreibung

•Edgebanding thickness capacity, 10 – 50 mm panel thickness, 60 mm minimum panel width & 140 mm minimum length

•Pre-milling station with (2) 3 HP – 12,000 RPM counter rotating vertical milling heads: both with pneumatic jump control, 30 mm spindles, fully enclosed by noise insulated cabin

•Gluing unit for edges up to 3 mm thickness, 56 mm height.

•Front & rear end trims (motors 0.5 HP – 12,000 RPM each), motors tilt 0° - 15° on horizontal plane, 45° chamfer cut with on/off on control.

•Top & bottom rough trims (motors 0,7 HP – 12,000 RPM each), (prepared for “quick change” of motors, for interchangeable 2nd set of bevel/radius trim units)

•Top & bottom fine/bevel/profile multi-function trims (motors 0.6 HP – 12,000 RPM each), tilts 0°- 10° for bevel and 3 mm PVC corner round (prepared for “quick change” of motors, for interchangeable 2nd set of bevel/radius trim units)

•Moulding unit (motor 2,5 HP – 12,000 RPM each), units tilt 0° - 90°.

•Corner rounding units from trimming leading & trailing upper and lower edge/corners when edgebanding all (4) sides or when edgebanding “soft- or postformed” panels (4 motors 0.7 HP – 12,000 RPM each).

•Top & bottom scrapers for up to 5MM thick PVC banding, pneumatic pressure control for scraping knives, digital readouts, overhead PVC filter unit eliminates PVC chips being sucked in by dust collector.

•Top & bottom PVC edge color & surface reactivation unit, LEISTER hot air blower with temperature adjustment

•Function & line control with microprocessor

•Microprocessor displays stored data, on/off workstation sequence & trouble shooting diagnostic; data input by alphanumeric keyboard; microprocessor adjusts according to stored programs or input; top pressure beam opening, pressure section position & pressure control, in/out pneumatic sideways positioning of “trim/scrap/corner round” workstations, on/off sequence of workstation motors

•Equipped with automatic strip & coil feed magazine with 3 mm PVC guillotine

•0.7 Kg capacity overhead granular glue “Quick Melt” hopper feeding compact size, Teflon coated lower applicator glue pot, 25 mm diameter glue applicator roller, reversible rotation by flip of switch

•Pressure section with (1) large diameter (200 mm) clutch controlled drive roller and (4) jump action, pneumatic pressure idle rollers, horizontal Adjustment w/digital indicator

•Hardened steel link feed chain with “anti-slip” 80 mm wide rubber pads

•(2) feed speeds, with 2.2 Kw or 3.3 Kw drive

•Motorized adjustment of top pressure beam. Heated infeed fence, automatic panel spacing control, remote control job button, insulated sound enclosure over all trim stations; rotating operator control panel at eye-level height, 15 KVA – 240 Hz frequency inverter & complete set of used tooling

Machine specifications are based on original manufacturer’s information as reported in the original manual of this machine and are subject to verification.
nach oben