Surplex used machinery
Sell Surplex Trust
Smooth auction process - Surplex informs you about the current situation: more information

Auction 'KUPER Stock Machines (Part 3)': lot no. 85 HOMAG KRO 73 Edgebander
Germany, 33397 Rietberg

Closing time
in 7 day(s) 11 hrs
21/07/2020, 11:37
Current highest bid
380
1 Bid, 4 watchers
Please log in
400
Next accepted bid
Bid now

Details

Calculate total price
Print
Do you have any questions in relation to the machine? Please contact us.
Gabriela Angelova (Manager Customer Care)
Gabriela Angelova & team
Name: HOMAG KRO 73 Edgebander
Item No.: 564014
Manufacturer: HOMAG
Model / Type: KRO 73
Year of manufacture: 1990
Machine available from: immediately
Machine condition:
Location: Germany, 33397 Rietberg
Fix fence side on the right.

Basic machine with panel-transport device, prepared
for the installation of the processing units.

Conveying chain 80 mm wide with rubber.

Top pressure manually adjustable in height with compound-v-belt.
Panel support with rolling rail.
Flexible clamping system for the processing units.
Glue roller drive in case of feed stop.

Feed infinitely variable 10 - 30 m/min.
working height               920 mm
working width           min.  85 mm
workpiece overhang         40 mm
workpiece thickness    7 - 60 mm

Electrics:
operating voltage 380 Volts, 50 cyc.
control voltage 220 Volts, installation as per VDE rules.

Some measurements of the base machine may change due to
the processing units.
Floor conditions have to correspond to foundation plan.

Chip channel in machine column.

1 x right
hot-melt gluing unit QA 22/27 for magazine HL 22/27
melting unit with granulate container 8 L
electronic temperature regulation
glue roller diam. 26 mm
level control of glue's melting quantity

1 x right
magazine HL 27 gluing part A
infeed angle 8 degrees
edge thickness = 0.4 - 20 mm
edge width     = 16 -  65 mm
processing     = 900 mm2
edge length min. 260 mm
solid-edge supply
strips supply

1 x right
roll-cutting device for single roll 3.5 mm
for HL 20-27
for single roll
edge thickness max. 3.5 mm
edge width     max.  65 mm
processing     max. 135 mm2 in case of ABS
               max. 100 mm2 in case of veneer
roll diameter  max. 600 mm

1 x right
pressure zone C
1 prepress roll driven diam. 200 mm
3 post-press rolls diam. 150 mm
pressure adjustment pneumatically
for straight edges

1 x right
special snipping unit chamfer/straight 1,0 kW
apidly adjustable lateral tracing
2 motors each 1 kW, 300 cyc., 18000 rpm.
edge dimensions max. chamfer   3 x 65 mm
                     straight 20 x 50 mm
from edge thickness 3 mm lateral tracing has
to be retracted and chamfer saw has to be re-
moved
workpiece thickness max. 60 mm
adjusting device for manual lateral movement
in the support bearing on 4-fold turret
2 TCT-saws 100 x 3,2 x 32, t=20
2 TCT-saws  92 x 3,2 x 32 x 45 degrees t=20

1 x right
electronic braking from 0,2 - 3,74 kW

1 x right
pneumatic adjusting device snipping unit
for electropneumatic lateral movement
of special snipping unit in carrier bearing max. 50 mm

1 x right
rough trimming unit top and bottom 1,5 kW
2 motors one above the other,
each 1,5 kW, 200 cyc.,12000 rpm. with plug-type
connection
manual lateral movement, height adjustment
with the top pressure, working in opposite
movement
edge thickness max.      20 mm
workpiece thickness  7 - 60 mm
swivelling range +/-  1 degree
without tooling

1 x right
electronic braking from 0.2 - 3.74 kW

1 x right
trimming unit top and bottom 0.6 kW
2 motors each 0.6 kW, 300 cyc., 18000 rpm
manual lateral movement
height adjustment with the top pressure
working in opposite movement
spindle adjustment for lateral tracing roller
edge thickness max. 8 mm
workpiece thickness max. 60 mm
swivelling range 0 - 30 degrees

1 x right
electronic braking from 0.2 - 3.74 kW

1 x right
electronic braking from 0.2 - 3.74 kW

1 x right
noise-protection unit part
with chip-conveying belt in chip channel
length approx. 2200 mm

1 x right
belt sanding unit KS10
for sanding of straight edges
sanding belt speed 10 m/sec.
belt length 2100 mm
belt width   120 mm
sanding pressure manually adjustable
belt cleaning via nozzle
oscillation device

1 x left
frequency converter, 300 Hz

air connection 1/2", 6 bar min.
total connection approx. 39 A
Dimensions (l x w x h) approx.: 6,500 x 2,500 x 2,500 mm
Weight approx.: 4,200 kg
Do you have any questions in relation to the machine? Please contact us.
Gabriela Angelova (Manager Customer Care)
Gabriela Angelova & team
auction fee 15%
VAT: plus VAT
Delivery terms: FCA Rietberg, loaded on truck
Cost Dismantling & Loading 450€ (binding)
Shipping costs: not included
Payment terms: 100% payment prior to collection
Date: Friday, 31/07/2020 to
Friday, 31/07/2020, from 08:00 to 12:00

Monday, 27/07/2020 to
Thursday, 30/07/2020, from 08:00 to 15:00

Monday, 03/08/2020 to
Thursday, 06/08/2020, from 08:00 to 15:00

Friday, 07/08/2020 to
Friday, 07/08/2020, from 08:00 to 12:00
Surplex App for mobile bidding!
Free download:
iPhone & iPad
Android

Machines that you have recently viewed

watchlist
Item removed. Undo