Measuring and Marking Plates

15
Clamping plates, clamping cubes etc. from leading manufacturers
Categories
Reset filters Show items
Show on map view
JOHANN FISCHER ASCHAFFENBURG Hard Stone Mounting Plate
shape
JOHANN FISCHER ASCHAFFENBURG Hard Stone Mounting Plate
shape
Measuring granite plate
shape
Germany, 65428 Rüsselsheim
Measuring granite plate
Granite measuring plate
shape
Germany, 76275 Ettlingen
Granite measuring plate
Surface plate
shape
Germany, 76275 Ettlingen
Surface plate
Lot measuring stands
shape
Germany, 69168 Wiesloch
Lot measuring stands
Lot measuring tables with dial gauge holder
shape
Germany, 69168 Wiesloch
Lot measuring tables with dial gauge holder
OELZE granite measuring plate
shape
Germany, 73235 Weilheim Teck
OELZE granite measuring plate
PLANOLITH granite measuring plate with contents
shape
Germany, 78132 Hornberg-Niederwasser
PLANOLITH granite measuring plate with contents
Surface plate
shape
Germany, 78132 Hornberg-Niederwasser
Surface plate
Granite measuring plate
shape
Germany, 78132 Hornberg-Niederwasser
Granite measuring plate
Surface plate
shape
Germany, 09120 Chemnitz
Surface plate
MYTRI granite measuring table
shape
Germany, 76275 Ettlingen
MYTRI granite measuring table
HAHN & KOLB granite measuring plate
shape
Combined surface plate
shape
Germany, 40472 Düsseldorf
Combined surface plate

Surface Plate with Content
shape
Germany, 73274 Notzingen

Surface Plate with Content

INTERGRATED DYNAMICS ENGINEERING Measuring and Marking Plate
shape
United Kingdom (Great Britain), S60 5TZ Rotherham

INTERGRATED DYNAMICS ENGINEERING Measuring and Marking Plate

Granite measuring plate on rack
shape
Germany, 41748 Viersen

Granite measuring plate on rack

Marking Plate with Accessories
shape
Germany, 15834 Rangsdorf

Marking Plate with Accessories

OELZE Marking Plate
shape
Germany, 85716 Unterschleißheim

OELZE Marking Plate

Measuring and marking plates belong to marking tools like scribers, compasses and other instruments. The marking process consists of drawing marks (engravings, dots, lines) on a workpiece, which allow precise further processing. For this purpose, the workpiece is clamped firmly on a marking plate or marking table. In order to achieve optimum results, the prototype, welded construction or casting to be measured must lie absolutely flat and steady. Therefore, measuring and marking plates are usually made of granite or cast iron. Surplex offers used plates at favourable conditions.

Plates for measuring and marking are primarily used in industry. They can be found either directly on the machine or in specialised measuring rooms, where ideal temperature and humidity conditions are maintained. Measuring and marking plates must be used together with the corresponding measuring instruments and marking tools.
  • Used on machines or in specialised measuring rooms
  • Requires corresponding measuring instruments
  • Using for measuring height and length
 Quality   Great offers   Personalized The plates are either placed on a table or on a frame, upon which they can be laid securely. Marking and measuring plates are made out of high quality granite, hard stone or cast iron. These materials can sustain minor damage and still remain level. No bulges develop around the damaged area and the surface maintains its evenness. Support tables are optimally produced with three legs to avoid wobbling. Various aids must clamp and secure the workpiece when using measuring plates. The measuring itself is done by a toolmaker's microscope or other specialised measuring instruments. With the proper comparison measurements, measuring plates enable the detection of discrepancies up to 1/1000mm. Application as a marking plate enables marking brackets and try angles as well as scribers and height gauges. Marking tables are often equipped with 3-axel driven marking machines. An axial measurement system is typical, facilitating the proper setting of the marking machine.

Measuring and marking plates are necessary for the measurement of the height and length of a workpiece, and for monitoring, which is done through the comparison with known measurements. Marking plates can be applied anywhere where workpieces must be marked for further machining. The level surface of these plates guarantees high accuracy when working together with a height gauge, as well as repetitive accuracy and consistency. When working with a height gauge, it is important that the plate and the foot are clean to avoid inaccuracies. An example of a typical marking plate application is in marking polished and case hardened workpieces with a diamond scribe. Normal workpieces can be marked with the help of a compass or a height gauge. During further machining, the marks in the material are easy to recognise.

Several firms have focussed on the production of measuring and marking plates. Recommendable brands include MITUTOYO, MAHR, MOORE & WRIGHT, MICROPLAN, STOLLE, STARRETT, BOCCHI, METROLOGY, BATY, JOHANN and FISCHER.