Productos parecidos al artículo siguiente: BIESSE AKRON 445 C X Chapadora de cantos

Chapadora de cantos BIESSE POLYMAC LATO 38
0 Gebote
6,000 €
15/12/2016
11:11
Chapadora de cantos BIESSE Akron 855
1 Gebote
8,000 €
16/12/2016
11:00
Chapadora de cantos HOMAG Optimat KL 77/A20/S2
0 Gebote
6,500 €
15/12/2016
10:00
HOLZHER SPRINT 1411 K Edge Banding Machine
59 Gebote
7,000 €
06/12/2016
09:27
¡Así de fácil es hacer una oferta en Surplex!
Regístrate
Elija una subasta
Haga su oferta
Más información
Tres métodos para una venta exitosa
Compra
Subasta
Marketing
Más información

BIESSE AKRON 445 C X Chapadora de cantos

El artículo está en la Lista de seguimiento

Lo sentimos, esta máquina se ha vendido

Descubra máquinas similares disponibles

Costes y beneficios

Comisión   15%
IVA   *más IVA
Condiciones de entrega   cargado en camión
Costes de desmontaje y carga   350.00 € (obligatorio)
Costes de transporte   No incluido
Condiciones de pago   100% previo cobro

Detalles de la máquina

Nombre   BIESSE AKRON 445 C X Chapadora de cantos
Máquina núm.   349144
Fabricante   BIESSE
Modelo / Tipo   AKRON 445 C X
Año de fabricación   2009
Máquina disponible desde   immediately
Estado   sin comprobado
Ubicación de la máquina   33397 Rietberg, Deutschland

Detalles técnicos

espesor de canto   0,4-12 mm
espesor de la pieza de trabajo   10-60 mm
anchura de la pieza de trabajo min.   50 mm
alimentación   12-18 m/min
Dimensiones (l x w x h)   5600x1100x1600 mm
Peso aprox.   2200 kg

Descripción

Unilateral automatic edge banding machine with joining spindle unit for gluing and processing of flat edges as rolls and stripe goods up to 10 mm (melamine, PVC, ABS, veneer, solid wood, Formica, veneers, etc.)

Additional functions:
- Autostart of the selected aggregates motors
- Direct dial for the second run
- Management of up to 8 NC axes
- Program lists with manual bottom autostart
- Error diagnosis with comments
- Operating data acquisition

Controller ergonomically rotatably arranged
TECHNICAL SPECIFICATIONS AKRON 400:
---------------------------
Workpiece thickness 10-60 mm
Workpiece thickness at MFU unit 10 - 35/60 mm (depending on profile)
Edge height 14-64 mm
Edge thickness rolls from 0,4 to 3 mm
Edge thickness strips goods * from 0,4 to 10 (12) mm
Workpiece overhang 25mm
Minimum plate length 140 mm
Minimum width (at 140 mm length) 85 mm
Minimum width (250 mm length) 50 mm
Feed speed 12 m / min.
Compressed air supply 7 bar
Supply voltage 400 V / 50 Hz three-phase with neutral wire
Control voltage 24 V - CC
Frequency of the static converter 200 Hz
Glue tank capacity 2 kg
Melting time at half filling about 10 minutes

TS 10: NC CONTROL WITH TOUCH DISPLAY
The NC control TS 10 allows easy and intuitively control of the machine with its individual units. * Graphical color. LCD 10 \\\ "touchscreen with 640 x 480 pixels
* Operating system Windows CE
* USB interface

SPRAYING UNIT FOR ANTI-ADHESIVE ADZ-700 To ensure optimal workpiece cleaning during processing, an anti-adhesive is sprayed to the upper and lower surface of the workpiece
Last is positioned in front of the trimming unit.
Highly precise application of the anti-adhesive thanks to the injectors, which are activated by numerical control.

JOINT TRIMMING UNIT AT INLET FI-502 Adds the in process situated workpiece before the glue application.
The use of this unit allows an even and uniformly moderate plate edge surface, to apply a thin glue joint
Two 3.5 kW high-frequency motors with 12000 rpm

GLUING UNIT VC-511:
Automatic shears for accurately separating the rolls, pneumatic pressure zone

At the Akron 400 compilations H the pressure zone is over a servo motor set. The setting is done via control system.

KIT PRO GLUE
The kit PRO-GLUE consists of the following components:
* System TEKNO-GLUE for optimum bonding by:
- Controlled keying of the glue roller
- Automatic swinging away at feed stop
- Automatic ON / OFF of the gluing unit
* System REVERSE to turn the glue roller in clockwise and counter-clockwise direction

additional FEEDERS FOR PUR GLUE

Trimming unit IN-801
Two engine end trimming unit each with 0.8 kW at 12000 rpm. For trims at the front and rear of the excess edge with 0 ° to 15 °inclination
- Pneumatic switch with pre-selection of the cutting angle between 0 and 15 degrees by SPS
- Aggregate exclusion (replacement) from the processing and a independent tilting of the two snipping engines - Suction system
- SYSTEM FLEX with controlled projecting. Allows the setting of the saw blade trim position on the panel to to obtain a certain overhang of the edge. Ideal for applications which require the milling function for forming, especially for soft anf postforming pieces

Swivel chamfer milling unit RI-501
For upper and lower flush and / or chamfer milling of glued- edge, with two 0,65 kW high-frequency motors with 12000 rpm and frontal and vertical self-cleaning sensor rollers. Complete with suction hoods.
The unit can also process edges with dust. The unit is pivotable at 0 - 45 degrees (angle display on angle scale) with System Unipoint. Complete with numeric displays to simplify the settings.
The upper unit is self-regulating with the workpiece height. Horizontal scanning by aggregate movement on linear guide elements with sphere rotation.

At the Akron 400 composition H the aggregate is with 4NC axes equipped that are driven by servo motors. The position of the tools and the button is made by the controller so that all the operations of the multifunction router can be executed (for example, thin edges + R = 2 mm + solid wood). The angle of the unit is fixed.
2-ENGINED MULTIFUNCTIONAL TRIMMING UNIT CR-200V
For corner rounding and profile milling of workpiece edges from synthetic material up to a thickness of max. 3 mm. Complete with 2 high frequency motors with 12000 rpm each 0.65 kW. The corner rounding is possible for straight workpieces and also for softforming pieces of 90 to 180 degrees. Height production quality thanks to movement on linear guide vertically oscillating copying device and a so-called Vorkopplersystem. With SYSTEM FAST 4: Electro-pneumatic adjustment of side palpation on 4 fixed points, 1 for radius milling of the thick edge and 3 for bevel trimming of thin edges.

COMPACT SCRAPING UNIT RBK-502
For finishing of thick edges made of PVC / ABS. Standard fitting with air nozzles at the sensing rolls.
Manually exchanging of the aggregate of the processing line.
FLAT SCRAPER RCC-701
Scraper for removing spilled glue along the glue joint. Scanning with 3 + 3 vertical scroll buttons, nonstick sprayer against adhering glue on the blade.

AUTOMATIC PROFILE MILLING UNIT WITH TIME CONTROL TA-501
Aggregate with time regulated use and pneumatic drive for form milling and / or milling of the horizontal and vertical workpieces. From 0 - 90 ° pivoted 3.5 kW grooving unit. Without router.

BUFFING UNIT SP-501
Swivel unit with automatic adjustment to the workpiece height, for cleaning and buffing of the workpiece edge. With cloth polishing wheels. Two 0,37 kW engines 2800 rpm.

HOT AIR UNIT PH-501
Aggregate to reactivate the color of thick edge bands from plastic material after smoothing, with a 2 kW fan with adjustable temperature
Ir al inicio