kone-ehdotukset IMA COMBIMA/K/II…. Kaksipuolinen listoituskone

IMA Quadromat L Reunalistakone
0 Gebote
1,000 €
16.12.2016
11:06
HOMAG Optimat KL 77/A20/S2 Reunalistakone
0 Gebote
6,500 €
15.12.2016
10:00
HOLZHER SPRINT 1411 K Edge Banding Machine
59 Gebote
7,000 €
06.12.2016
09:27
OTT Altantic Edge Banding Machine
0 Gebote
5,500 €
15.12.2016
12:23
Surplex - niin helppoa tarjota!
Rekisteröidy
Valitse huutokauppa
Tarjous
Lisätietoja
Kolme tapaa onnistuneeseen kauppaan!
Osto
Huutokauppa
Markkinointi
Lisätietoja

IMA COMBIMA/K/II…. Kaksipuolinen listoituskone

Tämä artikkeli on sinun katsottavien lista
IMA COMBIMA/K/II…. Kaksipuolinen listoituskone
IMA COMBIMA/K/II…. KAKSIPUOLINEN LISTOITUSKONE
MYYTY
   

Valitamme, tämä kone on jo myyty

Löydä samanlaisia saatavilla olevia koneita

Kustannukset ja hyödyt

huutokauppamaksu   15%
ALV   *sekä ALV
Kuljetusehdot  
Kuljetuskustannukset   ei sisälly
Maksuehdot  

Koneen yksityiskohdat

Nimi   IMA COMBIMA/K/II…. Kaksipuolinen listoituskone
Kone nro   175576
Valmistaja   IMA
Malli / tyyppi   COMBIMA/K/II….
Valmistusvuosi   1994
Kone saatavilla alkaen   immediately
Koneen laatu   ei tarkistettu
Koneen sijainti   100213 Ploiesti, Rumänien

Tekniset tiedot

reunan paksuus   0,4 - 3 mm
työkappaleen paksuus   8 - 60 mm
syöttö   10 - 50 m/min
syvennyksen leveys   1600 / 3500 mm
Mitat noin   30000 x 30000 x 2200 mm
Paino noin   46000 kg

Kuvaus

L-Form; 1st machine type Combima/K/II/R75/1600/V/R3 S02 (y.o.m. 1994, machine number 13115), 2nd machine type Combima/K/II/R75/1410/V/R3 (y.o.m. 1994, machine number 13116) Double-sided IMA sizing and edge banding line - line version with first machine for softforming and straight edging, second machine for straight edging and copy aggregate for softforming. The line is in square construction, second machine is disposed at 90° to the first machine. The IMA line is constructed as follows (1) Feeding System - two roller tables. (2) COMBIMA/K/II/R75/1600/V/R3 S02 Sizing and Edge Banding Machine with Softforming Technical details • fix fence side left, adjustable side right • processing width max. 1600 mm • edge thickness 0,4 – 3 mm • workpiece projection 35 mm • workpiece thickness 8 – 60 mm • feed rate 10 – 50 m/min Aggregate characteristics left/right • compact double hogger two motors, each 6,6 kW • milling unit SOFT top/bottom, 2 x motor 1,85 kW • standard milling unit, pneumatically controlled, 2 x motor 4,4 kW • standard milling unit, pneumatically controlled, motor 8 kW • workpiece preheating • high-performance gluing unit with piston for softforming / melt adhesive unit • edging magazine 2-fold roll • pressure area with rollers and jigs for edge fold on panel softforming profile • gluing unit with roller for straight edge / melt adhesive unit • edging magazine 2-fold roll • end trimming unit for front and back edge, 2 x motor 0,4 kW • rough milling unit top/bottom, 2 x motor 1 kW • finish milling unit top/bottom, 2 x motor 0,6 kW • finish milling unit top/bottom, 2 x motor 0,15 kW • profile scraper blade electro-pneumatically controlled • flat scraper • standard milling unit, motor 1,5 kW • heating unit for PVC edge (3) IMA Angular Transfer System LONGITUDINAL – TRANSVERSAL (SQUARE) For transfer of workpieces from first machine (longitudinal direction) to the inlet of the second machine at 90° (transversal or square direction) Technical details • workpiece thickness single assignment 12 - 60 mm • workpiece length 250 - 3500 mm • workpiece width 250 - 1600 mm (4) COMBIMA/K/II/R75/1410/V/R3 Sizing and Edge Banding Machine with copy aggregate for panel with Softforming profile. Technical details • fix fence side left, adjustable side right • processing width max. 3500 mm • edge thickness 0,4 – 3 mm • workpiece projection 35 mm • workpiece thickness 8 – 60 mm • feed rate 10 – 50 m/min • block pins Aggregate characteristics left/right • compact double hogger two motors, each 6,6 kW and one motor 3,3 kW, pneumatically controlled • standard milling unit, pneumatically controlled, motor 4,4 kW • workpiece preheating • gluing unit with roller for straight edge / melt adhesive unit • edging magazine 2 fold roll • pressure zone with roller • end trimming unit for front and back edge, 2 x motor 0,4 kW • rough milling unit top/bottom, 2 x motor 1 kW • finish milling unit top/bottom, 2 x motor 0,6 kW • finish milling unit top/bottom, 2 x motor 0,22 kW • copy aggregate for softforming profile, 2x motor 0,22 kW • profile scraper electro-pneumatically controlled • flat scraper • buffing unit • heating unit for PVC edge (5) MINK Brushed Machine For clean the panels on output of the line.
Ylös