Suggestions pertinentes de machines SCM TI 145 EP CLASS Toupie Horizontale

SCM T 120 C Spindle Moulder
4 Gebote
360 €
16/12/2016
11:57
SCM COMPACT 22 Moulder
1 Gebote
1,200 €
22/12/2016
10:03
Toupie ALDINGER
7 Gebote
220 €
15/12/2016
10:44
REX 59 F  Spindle Moulder
1 Gebote
400 €
15/12/2016
10:40
Il est facile de faire une offre sur Surplex!
S’inscrire
Sélectionnez l’enchère
Faire une offre
En savoir plus
Trois méthodes pour réussir votre vente!
Acheter
Enchère
Commercialisation
En savoir plus

SCM TI 145 EP CLASS Toupie Horizontale

L’article est dans votre Liste à surveiller

Désolé, cette machine a été vendue

Découvrez d’autres machines similaires disponibles

Coûts et avantages

Frais d’enchère   15%
TVA   *plus TVA
Conditions de livraison   départ usine, chargée sur camion
Frais d’envoi   non inclus
Modalités de paiement   100% du paiement avant la collecte

Détails de la machine

Nom   SCM TI 145 EP CLASS Toupie Horizontale
Machine n°   213153
Fabricant   SCM
Modèle / Type   TI 145 EP CLASS
Année de fabrication   2013
Machine disponible à partir de   immediately
Qualité de la machine   non vérifiée
lieu   74206 Bad Wimpfen, Deutschland

Détails techniques

Dimensions (L x l x h)   2600 x 1300 x 1950 mm
Poids approx.   903 kg

Description

Machine no: AB/217106
Technical data

Worktable dimensions     [mm]    1200x780
Spindle tilting    [degrees]    +45,50°
-45,50°
Working length of spindle (C.E). diam. 30-35 (40-50)     [mm]    160
Spindle base projection from table with interchangeable spindle    [mm]    87 (7 kW)
62 (9 kW)
Max tool diameter retractable under worktable with rings (with “Fast” section table)    [mm]    (300x43)
Spindle fence stroke with mechanical programming   (positioning with respect to  the spindle axis)    [mm]    125
   (from -125 to +125)

FLEX ONE spindle moulder stroke (positioning with respect to the spindle axis)    [mm]    125
   (from -125 to +125)
External diameter of exhaust outlet on spindle moulder hood    [mm]    120
External diameter of exhaust outlet on base    [mm]    100
Air flow speed of exhaust hood    [m/s]    20
Exhaust system air consumption    [m3/h]    1380

 Standard equipment 
    "Ready" electronic control
Electronic programmer with 2 or 3 axes which selection by keyboard and digital display:
* management of spindle lifting and tilting
* storage capacity up to 300 working programs
     Spindle moulder fence with mechanical adjustment
moulder fence with continuous linear adjustment by handwheels
accessible from the front of the machine:
  * adjustment of entire fence in respect of tool diam.
  * adjustment of entry fence for thick removal
 - mechanical readout for the adjustment
 - wooden tables and connecting bars
 - 250 mm max. tool diameter 
     "FAST" section table replacing the table rings optimize the working support under the cutting tool, with manual external adjustment
    3000/4500/6000/7000/10000 rpm spindle speeds
    Electric speed display dial (CE and electrical protections versions)
    Electrical presetting for feeder (CE version)
    Reverse spindle rotation electrical interlocking for reverse operation
    Direct motor start (USA/Canada version)
    Manual star-delta start (electrical protections)
    Automatic star-delta start (CE version)
    7kW 50Hz motor power
     -[S6 -40%]     7kW 9,5HP 50Hz (8kW 11HP 60Hz)
    MK5 interchangeable spindle
MK5 interchangeable spindle  includes the presetting for the “T-SET” 
rapid tool locking.

Safety/Protections
    Spindle protection for operations (160 mm max. tool diameter) (CE version)
    Emergency pushbutton
    Safety microswitches on spindle locking (CE version)
    Safety microswitch on motor access door
    Padlockable main switch
    Overload switch protection
    Auxiliary low voltage circuit (110 volt)
    Automatic brake on main motor (CE version)
    Mechanical brake on main motor (USA/CANADA and electrical protections versions)
    Certificate of conformity "C.E. standards" (CE version) 

01.08.92    TI145 EP CLASS - Spindle moulder with tilting spindle (CE version)    N. 1    

93.07.31    Volt 400 EU    N. 1    

93.12.01    Frequency 50 Hz    N. 1    

55.50.78    "READY 3 UP" version    N. 1    
complete with:
    upper mobile control panel
     “Flex One” spindle moulder fence
* automatic movement of the entire fence with respect to 
 the tool diameter
* manual adjustment of the infeed table (removal) by means 
 of handwheel complete with mechanical numerical readout
* work table exclusion system
* aluminium tables with connecting bars
* 250 mm max. tool diameter
     9kW Hz50 (11kw Hz60) motor power with automatic star-delta start:
 [S6 -40%]      9kW 12HP 50Hz (11kW 15HP 60HZ)

57.02.57    Manual vertical and horizontal feeder support    N. 1    
Vertical adjustment with reference to the workpiece thickness to be processed, with mechanical digital readout of the position and horizontal adjustment with reference to the tool
This device, utilizing the column support of the upper mobile control panel  allows the exclusion of the feeder from the working table

57.02.92    "T-SET" rapid tool locking    N. 1    
A simple compressed air gun allows the tools locking and unlocking

11.02.93    "LL" version with 2 cast-iron profiling extensions    N. 1    
with
    total length of table 2500 mm complete with  front support bar for large workpieces;
    emergency pushbutton.
 
13.13.04    Spindle moulder shaft of 30 mm diam.    N. 1    

Total price     EUR    20.579,00
 

Haut de page