Centre d'usinage vertical MAZAK Integrex e-500H II x 3000U
Détails de l'article
- Nom
- Centre d'usinage vertical MAZAK Integrex e-500H II x 3000U
- Article n°
- 962527
- Fabricant
- MAZAK
- Modèle / Type
- Integrex e-500H II x 3000U
- Année de fabrication
- 2010
- Article disponible à partir de
- Immediately
- Qualité de l'article
- Lieu
-
Belgique, 8510 MARKE
- Afficher sur la carte
- Tous les articles à ce lieu
Coûts et avantages
- 6 000,00 €
- Frais d’envoi
- non inclus
- Conditions de livraison
- FCA MARKE, chargée sur camion
- Conditions de paiement
- 100% du paiement avant la collecte
- Taxe / caution
Détails techniques
- voyage-z
- 3 122 mm
- max. workpiece weight between centers
- 710 Kg
- Voyage-x
- 870 mm
- course-y
- 500 mm
- contrôle
- Mazatrol Matrix
- fuseau
- BT 50
- positions du changeur d'outils
- 40
- Puissance de la broche
- 37 kW
- Couple de la broche
- 1 400 Nm
- Gamme de vitesse
- 1 600 tours/minute.
- gamme d'alimentation
- 4 500 mm/min
- Traversée rapide
- 40 m/min
- puissance totale requise
- 30 kW
- Poids approx.
- 26 000 Kg
- Dimensions d'installation approximatives (LxlxH)
- 8 040 x 4 600 x 3 220 mm
Description de l'article
- Serial no: 221759
- Operating hours as at 08-11-2023: 10035 h
- Maximum Swing:
- 1500U: Ø820 mm
- 3000U: Ø820 mm
- Swing Over Cross Slide:
- Ø820 mm (both models)
- Maximum Machining Diameter:
- Ø820 mm (both models)
- Maximum Support Mass (including chuck):
- Chuck work: 710 kg
- Shaft work: 1500 kg (Note 1)
- Rotating Speed: 35 – 3300 min⁻¹
- Turning Spindle Through Hole Diameter: Ø104 mm
- Turning Spindle Nose: JIS A2-11"
- Turning Spindle Bearing Inner Diameter: Ø150 mm
- Turning Spindle Motor (30-min. continuous rating): 30/22 kW (Note 2)
- Maximum Torque: 3379 Nm
- C-Axis Clamp Torque: 2700 Nm
- Smallest Input Capacity for C-Axis Movement (Rotation): 0.0001 degrees
- Max. Speed of C-Axis Rotation: 20 min⁻¹
- Rated Load Torque of C-Axis (for 180°): 1400 Nm
- Sleeve Hole Type: MT No. 5
- Maximum Thrust Power: 15 kN
- Movement Stroke:
- 1500U: 1466 mm (1157.8 mm with NC rest, Note 3)
- 3000U: 2990 mm (2681.8 mm with NC rest, Note 3)
- Rapid Traverse: 4500 mm/min
- Milling Head Type: Single spindle with ATC unit
- Tool Shank Type:
- Outside turning: Ø25 mm
- Inside turning: Ø50 mm
- Max. Tool Size: Ø260 × 500L
- Milling-Spindle Motor Output (30-min. rating): 37 kW
- Maximum Rotary Tool Torque (1-min. rating): 274 Nm
- Milling Spindle Speed: 25 – 10,000 min⁻¹
- B-Axis Clamping Force: 13.85 kN
- Angular Positions of Clamping the B-Axis Coupling: At 15° intervals (49 positions: -30° to +210°)
- Smallest Input Capacity for B-Axis Indexing: 0.001 degrees
- B-Axis Operation Range: -30° to +210°
- B-Axis 90° Indexing Time: 4 seconds
- Rated Continuous Torque of B-Axis (for 180°, 30%ED): 2795 Nm
- Continuously Rated Torque of B-Axis: 1322 Nm
- Rapid Traverse:
- X-Axis: 40,000 mm/min
- Y-Axis: 40,000 mm/min
- Z-Axis: 40,000 mm/min
- V-Axis (Optional): 8,000 mm/min
- Thrust (Continuous/150%):
- X-Axis (downward): 36,314 N / 48,659 N
- Y-Axis: 23,174 N / 34,761 N
- Z-Axis: 28,348 N / 42,520 N
- V-Axis (optional): 6,221 N / 9,326 N
- Movement Stroke:
- X-Axis: 1598 mm
- Y-Axis: 3122 mm
- Z-Axis: 939 mm
- V-Axis (optional): 2463 mm
- Coolant Tank Capacity:
- 1500U: 620 L
- 3000U: 800 L
- Power Requirement (Continuous Rating): 92 kVA
- Air Pressure: 0.5 MPa
- Air Requirement: 210 L/min (Note 4)
- Height of Centers: 1300 mm
- Length:
- 1500U: 6540 mm
- 3000U: 8040 mm
- Width: 5300 mm
- Height: 3220 mm
- Machine Mass:
- 1500U: 22,600 kg
- 3000U: 28,600 kg
- Noise Level (LwA):
- 1500U: 75.5 dBA
- 3000U: 75.5 dBA
- Uncertainty Level (K): ±4 dBA
- Measuring Conditions:
- Spindle speed: 2400 min⁻¹ (during workpiece gripping by chuck)
- Feed axis driven
- Turret to be indexed
- Chip conveyor ON
- Tailstock not used
- Measuring Position:
- Operator position, 1.6 m above floor level
- Standards: EN-12415, EN-12417, ISO230-5
Traduction automatique
Vente directe
6 observateurs
6
Observateur
sur demande
Prix
Nos services
- Service dépose & repose
- Réseau logistique à l'échelle internationale
- Conseils personnalisés
- Assistance pour les papiers & les formalités douanières