CHIRON DZ 12 W 4-axis vertical machining center

CHIRON DZ 12 W 4-axis vertical machining center
En vedette
lot num. 2
Heure de fin : 17/12/2024 14h00
29 000 € Offre de départ
6 observateurs
Inscrivez-vous pour faire une offre
Fixer l'agent d'enchères
plus frais d’enchère et TVA
CHIRON DZ 12 W 4-axis vertical machining center
17/12/2024 14h00
Heure de fin
29 000 €
Offre de départ
Nom
CHIRON DZ 12 W 4-axis vertical machining center
Article n°
964791
Fabricant
CHIRON
Modèle / Type
DZ 12 W
Documents
Spezifikation_Chiron_339-44.pdf
Vidéos
Vidéo 1
Année de fabrication
2015
Article disponible à partir de
immediately
Qualité de l'article
Lieu
Allemagne, 73630 Remshalden-Grunbach
Frais d’enchère
19 %
Coût de démantèlement et de chargement (obligatoire)
3 000,00 €
Prix total
plus TVA
Frais d’envoi
non inclus
Conditions de livraison
FCA Remshalden-Grunbach, chargée sur camion
Conditions de paiement
100% du paiement avant la collecte
voyage-z
400 mm
Voyage-x
550 mm
course-y
400 mm
contrôle
SIEMENS CNC-Steuerung 840D solution line
Poids approx.
10 000 Kg
Dimensions d'installation approximatives (LxlxH)
6 100 x 2 500 x 2 800 mm
  • Serial number: 339-44
  • Operating hours: 47,253
  • Belt filter system
  • Chip conveyor
Integrated workpiece changing device IWW 0/180°
for optimum chip fall with center partition made of sheet steel

with 2 integrated 2-spindle dual-axis tables CHIRON CASD 280-2
  • Workpiece changeover time approx. 3.5 s depending on weight
  • Self-regulating thanks to self-learning speed control

Integrated on each side of the table:

NC swivel axis CRT 200 as A-axis
  • Swivel angle - 10° / + 138°
  • Repeat accuracy ± 5” with
  • absolute, direct measuring system ECN 225
  • Torque motor drive
  • via backlash-free preloaded precision gears
  • Very high overload capacity
  • max. transmittable torque 1,200 Nm
  • Speed 42 min-1
NC rotary table as C-axis
  • 2 x face plate ø 245 mm
  • prepared for setting up a positioning and clamping system
  • Spindle distance a = 250 mm ± 0.005 mm
  • Repeat accuracy ± 5” with
  • absolute, direct measuring system ECN 225
  • digital direct drive by torque motor
  • max. transmittable torque 180 Nm
  • with pneumatic clamping
  • Holding torque 690 Nm
  • max. transport load 75 kg per face plate
  • Speed 200 min-1
  • Bridge dimension 540 mm
Counter bearing without drive
  • 4th, 5th and 6th NC axis
  • smallest input step 0.0001°
  • Pneumatic connection controlled for sealing air
  • Pneumatic connection controlled for clamping
  • Central hydraulic or pneumatic rotary feed-through
  • 6-core, integrated in A- and C-axis
Main spindle drive with 2 AC motors
  • water-cooled, pressurized with sealing air,
  • with tool clamping monitoring
  • 24.5 kW at 100% duty cycle
  • 40.0 kW at 25% duty cycle
  • Speed up to 15,000 min-¹
  • Torque max. 45 Nm
  • Speed acceleration from 0 to 15,000 min-¹
  • or deceleration in 0.6 seconds
  • Drilling capacity 2 x Ø 25 mm
  • Thread cutting 2 x M 20
  • Milling capacity 2 x 120 cm³/min
  • in E335 steel
Automatic tool changer
  • Robust, fully encapsulated pick-up chain magazine
  • with mechanical collision protection and taper cleaning
  • Tool positions 2 x 32
  • Tool taper HSK-A 50 DIN 69893
  • Tool diameter max. 60 mm
  • Tool length max. 250 mm
  • Tool weight max. 3 kg
  • Tool change time approx. 0.9 s (depending on control)
  • Chip to chip time approx. 2.4 s (depending on control)
Additional automatic tool changer
  • Robust, fully encapsulated pick-up chain magazine
  • With mechanical collision protection and taper cleaning
  • Tool positions 2 x 32
  • Tool taper HSK-A 50 DIN 69893
  • Tool diameter max. 60 mm
  • Tool length max. 250 mm
  • Tool weight max. 3 kg
  • Tool change time approx. 0.9 s (depending on control)
  • Chip to chip time approx. 2.4 s (depending on control)
Additional automatic tool changer
  • per magazine: tool places 2x32
  • Total 2 x 64 tool places
  • Version in 12.4 (2 magazine shafts).
Feed drive for X-, Y- and Z-axis
  • Digital direct drives with indirect absolute path measuring systems
  • Rapid traverse speed 75 - 75 - 75 m/min
SIEMENS CNC control 840D solution line
(PCU 50 / NCU 730.3, 1 channel)
  • incl. 10.4” TFT color screen / full keyboard / OP010S control panel
  • Windows XP operating panel logic
  • NC working memory 5 MB (freely available max. 3 MB)
  • (freely available max. 200 programs)
  • for the processing of part programs according to DIN 66025
  • Hard disk with approx. 20 GB freely available
  • Power display
  • Operating hours and parts counter on screen
Montrer la traduction
Traduction automatique
Nom de l’enchère
Large choix à des prix équitables : enchère de stocks pour l'usinage du métal
lot num.
2
Documents
Conditions spécifiques de l'enchère
Visite
Le lieu exact est communiqué sur demande
Pas de date fixe. Les articles sont à différents emplacements (consultez leur description). Visite uniquement sur rendez-vous !


Nos services
  • Service personnalisé en 16 langues
  • Conseil sur place & par des experts
  • Organisation du transport si nécessaire
  • Assistance pour les papiers & les formalités douanières