Machine à roder STÄHLI DLM 705

STÄHLI DLM 705 two-disc flat honing machine

- Machine number 1155
- Operating hours approx. 22,800 h
- Disc diameter 710 mm
- Maximum workpiece height 100 mm
- Upper disc speed, infinitely variable from 0 to 400 rpm
- Lower disc speed, stepless 0 to 220 rpm
- Center drive, infinitely variable from 0 to 400 rpm
drive power:
- Upper and lower discs each 18.5 kW
- Central drive 7.5 kW
- Hydraulic working pressure adjustment, infinitely variable from 0 to 2000 daN
- Belt tension disc above 110.23 Hz
- Disc below, engine - reduction gear 78.02 Hz
- Disc below, countershaft - spindle 53.98 Hz
- Center drive, motor - reduction gear 116.45 Hz
- Center drive, countershaft - Spindle 54.59 Hz
- Voltage three-phase current 3 x 400 volts / 50 / 60 Hz
- Air connection 6 bar

The machine is equipped with:
- STAHLI CNC control
- HKS oil separation system (dimensions 1200 x 900 mm)
- Hydraulic unit (dimensions 2200 x 1650 mm)
- Air cleaner
- Tool cabinet with content, consisting of various workpiece holders (must be adapted by the customer for their own workpieces),
- 2 additional grinding wheels
- Documentation for machine and controller

Please note the last 3 photos in our photo gallery. Here we show you one of the machined workpieces before and after machining from both sides and a diagram which is displayed in the machine control after the grinding process.

Further details can be found in the PDF files attached to our machine video.