Proizvodi nalik sljedećem artiklu: MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

Jednostavno je licitirati uz Surplex!
Registrirati se
Izabrati aukciju
Licitirati
Doznajte više sada
Tri načina da Vaša prodaja bude uspješna!
Kupnja
Aukcija
Marketing
Doznajte više sada

MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

Artikl je postavljen na Vaš popis praćenja
MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
MIKRON - AGIECHARMILLES HSM 400 U 5 AXIS MACHINING CENTER
PRODANO
   

Ovaj je stroj, nažalost, već prodan.

Otkrijte slične dostupne strojeve

Troškovi i povlastice

Provizija   15%
PDV   *plus PDV
Uvjeti dostave   ukrcaj na kamion
Troškovi demontiranja i ukrcaja   1.600,00 € (obvezujuće)
Troškovi prijevoza   nije uključeno
Uvjeti plaćanja   100% plaćanje prije preuzimanja

Pojedinosti ponude

Naziv   MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
Art. br.   214865
Proizvođač   MIKRON - AGIECHARMILLES
Tip   HSM 400 U
Godina proizvodnje   2008
Stroj dostupan od   immediately
Stanje stroja   neprovjereno
Lokacija   40549 Düsseldorf, Deutschland

Tehničke pojedinosti

Približne dimenzije   2800 x 2000 x 2700 mm
Približna masa   5500 kg

Opis stroja

Serial No. 107.87.00.204, with rotable tilting table, EROWA ROBOT COMPACT for 60 EROWA pallet spaces. The machine is constructed in portal design and a massive polymer construction guaranteed the introduction of occuring inertia and machining force into the machine frame. This guaranteed highest accuracy of the traverse distance. The moving parts are loaded on linear compact roller guides, which guaranteed a long service life and adhesion motion control as well as for difficult cutting performance. The machine table is performed as large construction. The HSM series is generated for high speed shaping.

Technical details:
- Travel X-axis 400 mm, Y-axis 240 mm, Z-axis 350 mm, B-axis + -110 degrees. C-axis N x 360 degrees
- max. accelerating force X/Y: 10,75/8,35 kN; Z: 4 kN
- rapid traverse rate X/Y/Z: 80 m/min
- spindle speed range 100 - 42.000 rpm
- spindle holder HSK - E 40
- spindle power at 40 % ED 13 kW, spindle power at 100 % ED 10 kW
- turning moment at 60 % ED 4,25, turning moment at 100 % ED 3,2 Nm
- tool changer for 68 tool holder
- chip to chip time VDI 2852 12,5 sek
- tool changer time (TC 36 / 68) 10,0 sek

Equipment:
- ARO paper belt filter system P 750 / 1000 100 l/min with diverse paper reels
- Haidenhain iTNC 530 2P CNC control for 5-axis processing
- EROWA ITS 148 swivel table changer system
- EROWA pallet changing system for 60 pallet spaces (no pallet table is incluced in delivery)
- infrared edge finder, type 4411 32.00
- BURN filtration plant WK 5806 - C 25
- documentation in german language
- chip conveyor
- diverse spare parts in plastic boxes

Dimensions:
- EROWA pallet changer system approx. 1500 kg, 1020 x 2150 x 2700 mm
- chip conveyor approx. 800 kg, 2700 x 800 x 1500 mm
- paper belt filter system approx. 400 kg, 1850 x 1000 x 1350 mm
- filter system approx. 300 kg, 670 x 850 x 1400 mm
- 1 pallet accessories approx. 100 kg, 2100 x 1000 x 400 mm

For further details please have a look at the attached copy of operating instructions and the attached videos. A video was shot in sellers Company, the other one was created after the dismantling.
The machine was taken on 07.15.2015 stock place into operation. The machine control (HEIDENHAIN iTNC 530) examined, tested axis functions in jog mode. The main spindle has not been used to prevent damage (spindle cooling unit without coolant emulsion) in operation. A manual / mechanical inspection of the spindle had apparently no errors. There was no noise, yet determined mechanical / electrical damage in the axle. The technician confirmed that the machine is in a very good condition. On request we will send you a copy of the installation report. Finally the machine was professional pepared for the transport.
Povratak na vrh