Professional and technically well-groomed Braun + Canali BBS.V 1800 K/R double band saw and other machines for solid wood parquet production.
Machine installation and technical data:
Pos. 1 Round Log Yard and sawmill
AUMUND bridge crane system, year 1978
Load capacity 2 x 4 to and roundwood grabs
MÖHRINGER Round Log Yard
Round timber entrance dimensions Length approx. 3,000 - 14,000 m
Round timber entrance dimensions Diameter approx. 250 - 1,100 mm
Round timber exit dimensions Length approx. 3,000 - 5,500 m
Round timber output dimensions diameter approx. 250 - 1,000 mm
JORO sonar material surveying system
HOLTEC ES 121 crosscut sword saw, year 2000
BZ BALJER - ZEMBROD WRP-QS root reducer, year 2006
NICHOLSON 44" A6 Debarker, year 1999
S+S Lignum-HX 1600/350/16 metal detector round timber, year 2010
HAMBERGER JE TL trunk measurement, year 2004
HOLTEC HMRS 800/8 m Splinter search tape
Braun + Canali B2H Block- / Tensioning trolley
Wire drive with frequency controlled 75 KW motor
Clamping blocks 4 pieces
Trunk diameter approx. max. 1.400 mm
Trunk weight approx. max. 9,000 kg
Carriage speed approx. 4 - 200 m/min.
Average feed speed approx. 30 m/min
LINCK V40 ZD „1“ Chipper
Braun + Canali BBS.V 1800 K/R Double band saw, year 1999
Roll diameter each approx. 1.800 mm
Roll width each approx. 280 mm
Motor each approx. 125 KW
Saw blade speed per blade approx. 28 m/sec
Hydraulic blade tensioning
Machine weight approx. 14.000 kg
Board goods Removal and transfer system
Pos. 2 Solid wood Parquet production
Material feed system
REINHARDT NC 810 H Under table crosscut saw 1 piece
Transport device
REINHARDT NC 810 Cross cut saws 2 pieces
Transport device
Input length approx. max. 5.500 mm
Input length approx. min. 2.500 mm before pre-cropping
Input length approx. min. 865 mm after pre-cropping
Thicknesses approx. 28, 34, 80 and 90 mm (mainly 80 mm)
Width approx. max. 500 mm
Output length at NC 810 approx. 2.400 mm for plank
Output length at NC 810 approx. max. 1,595 mm with triple length strip parquet "525"
Output length at NC 810 approx. min. 865 mm for double length strip parquet "425"
MÖHRINGER Autojet MS 120 Trimming saw, year 1999
Measuring section and conveyor system
MÖHRINGER Cross-cut and transversal Cross-cut saws
for friezes cut to size
PAUL 15 AOB Under table crosscut saw (single standing)
RAIMANN ProfiRip KR 610 6M Multi-blade saw, year 2007
Tool diameter approx. 250 / 300 mm
HEISS Z 2 Typ 551 Centrifuge, year 1998
Sorting line and 2 stacking units
RUDNICK + ENNERS VRT 6.000 x 5.500 mm Vibro-table
SARTORIUS MDB – D 65x50 Metal detector, year 2008
VECOPLAN VTH 55/25/5 Drum Chipper, year 2007
Pos. 3 Sharpening shop for saw blades etc.
VOLLMER GPA 10 U Stelliting machine, year 1992
VOLLMER RC 100 Straightening machine for band saw blades, year 2000
VOLLMER CA 200 Sharpening machine for band saw blades, year 2001
IDEAL BLS 320 welding station
VOLLMER VRB I Richtbank für Bandsägeblätter, year 1992
VOLLMER CAS Tandem sharpening machine for band saw blades
VOLLMER CE 20 H Sharpening machine for circular saw blades, year 1992 |
Njemačka, 83071 Stephanskirchen
