Aukcija Closure of a Precision Mechanic

FEHLMANN PICOMAX 56 L TOP CNC vertical machining center

FEHLMANN PICOMAX 56 L TOP CNC vertical machining center
Top lot
Lot br. 1
Aukcija je završena.
Licitiranje ovog lota je završeno
Otkrijte slične dostupne artikle.
Naziv
FEHLMANN PICOMAX 56 L TOP CNC vertical machining center
Broj artikla
925694
Proizvođač
FEHLMANN
Tip
PICOMAX 56 L TOP
Godina proizvodnje
2017
Artikl dostupan od
immediately
Stanje artikla
Lokacija
Njemačka, 72768 Degerschlacht
Troškovi demontiranja i ukrcaja (obvezujuće)
2.100,00 €
Troškovi prijevoza
nisu uključeni
Uvjeti dostave
FCA Degerschlacht, ukrcano na kamion
Uvjeti plaćanja
100% plaćanje prije preuzimanja
Približna masa
5.000 kg
približno određivanje mjere (d x š x v)(
2.400 x 2.400 x 2.500 mm
Serial number: 14317243
Operating voltage: 3 x 400 V
Frequency: 50 Hz
Rated current: 19 A
Control: HEIDENHAIN TNC 620
Travel distances:
X: 800 mm
Y: 400 mm
Z: 400 mm
Feed rate:
X: 1 - 30000 mm/min
Y: 1 - 20000 mm/min
Z: 1 - 20000 mm/min
Measuring systems/resolution:
Direct measuring system via linear scale axis X, Y and Z
Resolutions in X-, Y- and Z-axis: 0.001 mm
Measuring system ventilation X-, Y- and Z-axis
Position accuracy according to ISO 230-2
Accuracy X-axis: 0.006 mm
Repeat accuracy X-axis: 0.004 mm
Y-axis accuracy: 0.006 mm
Repeat accuracy Y-axis: 0.004 mm
Z-axis accuracy: 0.006 mm
Repeat accuracy Z-axis: 0.004 mm
The machine is equipped with a 30-position tool changer
Tool holder: SK 30
Speed range: 5000 - 12000 rpm
Economic milling capacity: 100 cm³/min
Max. Drilling capacity: 25 mm diameter
Thread cutting: M20
Table dimensions: 1400 x 480 mm
Number of T-slots: 8 pieces
T-slot width: 12-H8
T-slot spacing: 50 mm
Permissible table load: 350 kg
Distance from floor to coordinate table: 980 mm
Distance from coordinate table to spindle nose: 120 - 520 mm
Max. Tool diameter without free spaces: 63 mm
With free spaces: 130 mm
Max. Tool length: 240 mm
Max. Tool weight: 3 kg
Tool change time: approx. 3 s
Average chip to chip time: approx. 8 s
Incl. 10 SK 30 tool holders equipped with cutting tools as well as 2 machine vices (jaw width: 125 mm), 3 additional machine vices (jaw width: 70 mm) and a 4th axis (A-axis) from the manufacturer FEHLMANN
Type: AT 125 CNC Prikaži prijevod
Automatski prijevod
Naziv aukcije
Closure of a Precision Mechanic
Lot br.
1
Dokumenti
Uvjeti i pravila ove aukcije
Provjera stanja
Točna lokacija artikala na upit.
72768 Degerschlacht, Germany

- address on request only -

Please set up an inspection appointment, stating the lot number via e-mail: rmi@surplex.com
Preuzimanje
Ponedjeljak, od 15.07.2024 do
Utorak, 16.07.2024, od 08:00 sati do 16:00 sati

Ponedjeljak, od 22.07.2024 do
Petak, 26.07.2024, od 08:00 sati do 16:00 sati


Naše usluge
  • Osobna usluga na 16 jezika
  • Savjetovanje na lokaciji putem stručnjaka
  • Organizacija prijevoza po potrebi
  • Podrška s papirologijom i carinjenjem