WEINIG Unicontrol 10 Angular center
Francuska, 80560 ACHEUX EN AMIENOIS

Imate li bilo kakvih pitanja u vezi stroja? Molimo da naš kontaktirate.

Pojedinosti

Pojedinosti ponude
Naziv WEINIG Unicontrol 10 Angular center
Art. br. 639333
Proizvođač WEINIG
Tip Unicontrol 10
Godina proizvodnje 1989
Stroj dostupan od immediately
Stanje stroja
Lokacija Prikaži na karti Francuska, 80560 ACHEUX EN AMIENOIS
Prikaži na karti
Svi strojevi na ovoj lokaciji
Troškovi i povlastice
Uvjeti dostave FCA ACHEUX EN AMIENOIS, ukrcano na kamion
Troškovi demontiranja i ukrcaja 900 € (obvezujuće)
Troškovi prijevoza nisu uključeni
Uvjeti plaćanja 100% plaćanje prije preuzimanja
Tehničke pojedinosti
Približne dimenzije 6.000 x 3.000 x 2.500 mm
Približna masa 5.000 kg
Opis stroja
  • Window manufacturing line by unit; Capacity approx. 75-80 pieces per hour for an average length of 1.2m
  • The positions of the tools available for longitudinal and transverse machining are managed by a numerical control system.
  • Composition : Simple tenoning and forking unit
  • Working width: 30mm mini - 220mm maxi
  • Working height: 30mm mini - 100mm maxi
  • Length of the parts: 220mm mini - 2600mm maxi
  • Tenoning table: feed 6m/min and return 18m/min
  • Chainsaw motor power: 3KW (4 HP)
  • Spindle diameter: 40mm
  • Max. saw blade diameter: 350mm
  • Motor power shaft with 2 positions: 7.5 KW (10 HP)
  • Spindle revolutions: 3500 rpm; 7 digitized positions.
  • Profiling machine UNIVAR : 2 vertical shapers including one for flag tools
  • Working width: 40mm mini
  • Working height: 30mm mini - 100mm maxi
  • Length of the parts: 220mm mini
  • Multi-position shaft motor power: 7.5KW (10 HP)
  • Spindle speed: 6000 rpm
  • Spindle diameter: 40mm
  • Max. clamping length: 240mm
  • Base diameter: 112 - 140mm
  • Max. tool diameter : 232mm
  • Vertical travel: 120mm
  • Basic position under the table: 10mm (adjustable up to 20mm)
  • Horizontal stroke: 80mm
  • Height of the guide: 70mm
  • Motor power advance: 1.1 KW (1.5 HP)
  • Feed speed: 8 m/min
  • Diameter of the feed rollers: 95 mm
  • Feed roller width: 50mm/30mm
  • Feed roller centers: 100 and 120 mm.
  • Special equipment :Automation pack; Electromechanical drive of the tenoning machine carriage
  • 1 shaft with several complementary positions on the right
  • Pack for 2 pieces: capacity increase
  • Tenoning carriage with clamping by 2 cylinders
  • Tenoning shaft for 6 tools (clamping length 600mm - spindle diameter 50mm - stroke height 5x100mm)
  • Display control with 60 programs
  • 8 cycles per program, storage of one frame and one sash in one program
  • Automatic turner
  • Multi-position spindle with 4 tool sets
  • 1 sawing and grooving shaft on the right hand side
  • 1 shaft for cremone grooving on the right for cremone grooving during calibration
  • 1 horizontal grooving shaft underneath for milling a groove during calibration; 2 engine reinforcements
  • Safety guard (safety cover with electric lock and clocked protection for chainsaw and tenon shaft)
  • Ruler can be rotated +/- 60 degrees in both directions for studio window machining
  • Electronic length stop for wood lengths up to 2600mm.
  • Storage of 15 programs with 4 lengths each, including calculator for the difference between the external dimensions of the frame and the sash.
Surplex App za mobilno licitiranje!
Besplatno preuzimanje:
iPhone i iPad
Android

Strojevi koje ste posljednje gledali

popis praćenja
Artikl je uklonjen. Poništiti