Linija za proizvodnju for Tube Angles

Artikl je postavljen na Vaš popis praćenja
RP 10 Tube Turn Shaping System

RP 10 Tube Turn Shaping System

Cijena Poslati upit

Troškovi i povlastice

Uvjeti dostave   franko kamion
Troškovi prijevoza   nisu uključeni
Uvjeti plaćanja   100% plaćanje prije preuzimanja

Pojedinosti ponude

Naziv   Linija za proizvodnju for Tube Angles
Art. br.   349365
Stroj dostupan od   immediately
Stanje stroja   neprovjereno
Lokacija   49393 Lohne, Njemačka

Tehničke pojedinosti

Približna masa   0 kg

Opis stroja

Complete Tube Forming Line for Tube Angles, consisting of:

  • Tube Forming Line for elbows RP10: 1 roll feeder, L 12.000 mm, width 1.000 mm, paratial motor driven, bridge. strong>tube feeder and swivel device, roller width 1.000 mm, max. tube length for swivel device approx 4.500 mm.1 tube press (RP10), make: Siekmann, built in 1967, tube dimensions: 2D/SR 20 - 30", 3D/LR 16 - 42", 5D 20 - 32", heating system by induction and gas, hydr. piston-Ø max. 420 mm, piston bar-Ø 400 mm, pressing force max. 750 Mp, stoke 5.500 mm, tube passage max. 822 mm (46"), tube length max. 5.400 mm, feed max. 0,58 m/Min, line suitable for forming from stainless steel WP91/WP92, tube stamping line, 5 forming bars, 1x Ø 193 mm, L 8.100 mm, 1x Ø 273 mm, L 8.200 mm, 1x Ø 326 mm, L 8.200 mm, 1x Ø 457 mm, L 7.750 mm, 1x Ø 520 mm, L 8.360 mm, 3 extensions 1x Ø 193 mm, L 6.100 mm, 1x Ø 260 mm, L 6.100 mm, 1x Ø 44 mm, L 6.000 mm.1 Induction line, make: AEG-Elotherm, Type RTH-H 800/1, built in 1995, power 800 kW, voltage 20.000 V, frequence 50 Hz, voltage 953 kVA, inverter 800 kW: transformer block, condensator block, electric cabinet, 3 inductors, trolley. 1 induction line, make: AEG-Elotherm, Type RTH-H 800/1, buil in 1995, power 800 kW, voltage 20.000 V, frequence 50 Hz, 953 kVA, invertor 800 kW: transformer block, condensator block, elecdtric cabinet, 3 inductors, trolley.
  • Tube Forming Line for elbows RP 7: tube press (RP7), angle dimensións: 2D/SR 159 - 323 mm, 3D/LR 152 - 273 mm, 5D 139,7 - 219 mm, heating by induction, induction line, make: AEG-Elotherm, capacity 400 kW, for tube angles 168 - 219 mm, 6 inductors, pressure max. 240 bar, shaft length 250 - 450 mm, dia max max. 241 mm, outer tube dia. max. 219 mm, min. 70 mm, outer tube length max. in standard operation 2.100 mm, distance between stations 2.700 mm, piston-Ø 200 mm, piston bar-Ø 190 mm, pressure motion max. 2.200 mm, defeedersystem, plate width approx. 500 mm, hydraulic unit, make: G. Nolte, Type Nr. 11.7808, tube stamping line, fixed tools on bars.
  • 1 Tube Forming Line for elbows RP9: tube dimensions: 2D/SR 12 - 20", 3D/LR 12 - 20", 5D 10 - 16", induction line, make:AEG-Elotherm, power 800 kW, 6 inductors, heating by induction, hydraulic cylinder-Ø 335 mm, piston bar-Ø 320 mm, stroke 2.750 mm, pressure 350 t, hydr device, make: G. Nolte, Type Nr. 078115, pressure max 200 bar, 3 shafts, 1x Ø 182 mm, L 10.600 mm, 1x Ø 212 mm, L 10.550 mm, 1x Ø 298 mm, L 10.000 mm.
  • 1 Tube Forming Press for elbows RP3: tube dimensions: 2D/SR 12 - 24", 3D/LR 10 - 22", 5D 10 - 16", heating by gas, 4 gas burners, tempeture max. 1.000°C, 5 gas ovens, suitable for stainless steel WP91/WP92, 4 shafts, hydraulic piston-Ø max. 342 mm, piston length 3.500 mm, cylinder length 3.200 mm, piston shaft-Ø 320 mm, pressure max. 320 Mp, stroke 2.750 mm, feed max. 0,34 m/Min, hydr aggregate, pressure max. 150 bar, 4 shafts, 1x M80x2, L 10.000 mm , 1x M100x2, L 9.300 mm, 1x M100, L 9.600 mm, coupler with internal thread M100x2, outer-Ø 240 mm, L 360 mm. 1
  • 1 Tube Forming Press for elbows RP2, tube dimensions: 2D/SR 8 - 14", 3D/LR 8 - 12", 5D 8 - 10", heating by gas, 5 gas burners, hydr piston-Ø max. 256 mm, piston length 3.500 mm, cylinder length 3.250 mm, pistion shaft-Ø 240 mm, pressure max. 120 Mp, shaft with head 100 mm, Ø 80 mm, L 9.600 mm. 1
  • 1 Tube Forming Press RP4, make:Siekmann, tube dimensions: 2D/SR 60,3 - 193,7 mm, 3D/LR 60,3 - 193,7 mm, 5D 60,3 - 177,8 mm, heating by gas, 2 Gas burners, 5 Gas ovens, 3 shafts, hydr piston-Ø max. 200 mm, pistion shft-Ø 175 mm, pressure max. 125 t, stroke 2.680 mm, feed max. 0,48 m/Min, hydr aggregate, working pressure max. 200 bar, electro welding convertor, make Dalex, 2 sh afts 1x Ø 60 mm, L 9.750 mm, 1x Ø 50 mm, L 10.000 mm.
  • Tube Continuous Stamping Line

Želite li prodati sličan artikl?

Ponudite svoj stroj ovdje

Dobivajte aktualne ponude putem e-pošte!

Prijavite se ovdje na naš besplatni newsletter

Jednokratno se registrirajte i profitirajte!

Besplatna registracija za sudjelovanje u našim online aukcijama

Surplex App za mobilno licitiranje!

Strojevi dostupni u ovoj kategoriji

 
Naziv lota
Lokacija
Br. ponuda
Trenutna
ponuda
Vrijeme završetka
 
 
RP 10 Tube Turn Shaping System RP 10 Tube Turn Shaping System
49393 Lohne, Njemačka
na upit bilo kada
Laser aparat za zavarivanje for Solar Collector Absorbers Laser aparat za zavarivanje for Solar Collector Absorbers
45891 Gelsenkirchen, Njemačka
na upit bilo kada
Povratak na vrh