• Edgebander
• Serial number 568/9-710 (1997)
• Edge thickness from 0.40 mm up to 25 mm
• Edge thickness in roll from 6 mm up to 60 mm
• Minimum workpiece lenght 140 mm
• Minimum workpiece width 60 mm
• Feed speeds: 8 and 16 m/min
• Feed motor 2.60 KW
• HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm
• HOLZ-HER 1903 edge feeder for strips and roll, edge magazine for one edge coil
• HOLZ-HER 1906 catridge glue system
• HOLZ-HER 1926 pressure group with (1+2) rollers
• End trimming unit, 2 x motor 0.35 KW-9000 rpm
• HOLZ-HER 1966 fine trimming unit, 2 x motor 1.00 KW-12000 rpm
• HOLZ-HER 1929 profile scraping unit
• HOLZ-HER 1983 profile trimming unit, 1 x motor 0.60 KW-18000 rpm
• Edge buffing unit, 2 x motor 0.20 KW-1370 rpm Mostra traduzione