적절한 기계-제안 BRANDT KD 88 FQ 엣진 밴딩기

엣진 밴딩기 BRANDT KD 68
10 Gebote
900 €
12-15-2016
10:22
BRANDT OPTIMAT KD 77-C Edge Banding Machine
15 Gebote
2,050 €
12-16-2016
10:04
엣진 밴딩기 BRAND KD 86
0 Gebote
2,000 €
12-15-2016
11:23
엣진 밴딩기 BRANDT KD 84
3 Gebote
700 €
12-16-2016
11:52
Surplex - 입찰하기 매우 쉽습니다!
등록하기
경매를 선택하세요
입찰하세요
더 자세히 알아보세요
귀하의 성공적인 판매를 위한 3가지 방법들!
구매
경매
마켓팅
더 자세히 알아보세요

BRANDT KD 88 FQ 엣진 밴딩기

품목이 고객님의 관찰목록

죄송합니다, 이 기계는 이미 판매완료되었습니다

구매가능한 유사 기계들을 찾아 보세요

비용 및 혜택

경매 수수료   0%
부가가치세   * 부가가치세 추가
배송 조건   트럭 적재
운송 비용들   포함되지 않음
결제 조건   수령전 100% 결제

기계 상세정보

이름   BRANDT KD 88 FQ 엣진 밴딩기
기계 번호   224362
제조업체   BRANDT
모델/타입   KD 88 FQ
제조 년도   1998
기계 구매가능 시기   immediately
기계 품질   비확인
기계 위치   12040 Marene CN, Italien

기술적인 세부사항

대략 규격   7500 x 2300 x 1900 mm
대략 중량   3000 kg

설명

EDGE BANDER SINGLE SIDED. , GENERAL SPECIFICATIONS, Max. working panel height with straight edge 55 mm, Applicable banding material in coils: thin edge and PVC up to 3 mm, Applicable banding material in strips: solid wood up to 12 mm , SYSTEM AND OPTIONALS OF THE PANEL HANDLING, Running driving chain, Top pression unit made by lines of idle wheels, Top pression unit with adjustable height in automatic by numerical control, Fixed feeding speed 13 m/min, Input panel guide is motorized and with adjusting in automatic by numerical control, Lateral bar with lines of idle wheels to support the panels , WORKING UNITS ON THE SQUARING SIDE, Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2.2 KW ( 12000 RPM) , GLUING UNIT, INSERTION AND PRESSION OF THE EDGE , Support for edge coil, Hot-melt glue pot and premelter , Spreading roller to regulate the quantity of apllied glue, Guillotine to cut the edge in coils, Roller set to press the edge on straight profiles - nr. 1 + 3 pression rollers - motorized regulation of depth position in automatic by numerical control , WORKING UNITS ON THE EDGE BANDING SIDE, End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 / 15 degree - motors power 0.35 KW ( 12000 RPM), Top and bottom rough trimming unit - motors power 0.55 KW ( 12.000 RPM), Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 25 degree - motorized regulation of depth position in automatic by numerical control - motors power 0.55 KW ( 12.000 RPM), Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 25 degree - regulation of the tilting by hand with visual unit - motors power 0.55 KW ( 11300 RPM), Rounding unit - nr. 2 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.4 KW ( 12.000 RPM), Edge scraping unit for the edge superfinishing , Brushing unit with motors to clean and polish the upper and lower edge , CONTROL OF THE MACHINE AND ACCESSORIES, Control and program system NC 16 - visual display - keyboard, Adjustable hanging command board to control the machine , Incorporated electrical cabinet , NORM AND OPTIONAL FOR THE SECURITY, Security norme CE mark, Safety and sound-proof enclosure cabinet of the working units , Aspiration system on the top part of the safety enclosure cabinet, Total installed power 13 KW
위로 가기