적절한 기계-제안 NIELSEN / KNOBLINGER / STELA Briquette Manufacturing Plant with 4 Extrusion Presses

MION & MOSOLE Suction System with Silo
11 Gebote
4,000 €
12-14-2016
10:47
RIELLO 39.001.500 Water Heating System
1 Gebote
800 €
12-14-2016
10:50
칩퍼기 GROSS GAZ-62
24 Gebote
2,200 €
12-16-2016
10:13
Surplex - 입찰하기 매우 쉽습니다!
등록하기
경매를 선택하세요
입찰하세요
더 자세히 알아보세요
귀하의 성공적인 판매를 위한 3가지 방법들!
구매
경매
마켓팅
더 자세히 알아보세요

NIELSEN / KNOBLINGER / STELA Briquette Manufacturing Plant with 4 Extrusion Presses

품목이 고객님의 관찰목록
NIELSEN / KNOBLINGER / STELA Briquette Manufacturing Plant with 4 Extrusion Presses
NIELSEN / KNOBLINGER / STELA BRIQUETTE MANUFACTURING PLANT WITH 4 EXTRUSION PRESSES
판매됨
   

죄송합니다, 이 기계는 이미 판매완료되었습니다

구매가능한 유사 기계들을 찾아 보세요

비용 및 혜택

배송 조건   사업장 해체 인도
운송 비용들   포함되지 않음
결제 조건   수령전 100% 결제

기계 상세정보

이름   NIELSEN / KNOBLINGER / STELA Briquette Manufacturing Plant with 4 Extrusion Presses
기계 번호   224461
제조업체   NIELSEN / KNOBLINGER / STELA
모델/타입   BP 6500
제조 년도   2009/2010
기계 구매가능 시기   at once
기계 품질   상태 양호
기계 위치   독일

기술적인 세부사항

연탄 직경   90 mm
출력   ca. 4 x 1.800 kg/h
대략 중량   1 kg

설명

Entire briquette manufacturing plant with 4 pcs. CF Nielsen BP6500 automatic briquetting extrusion presses.
The CF NIELSEN presses have only approx. 7,000 operating hours!
The briquetting diameter is 90 mm.


The plant has been maintained and checked regularly.
The last maintenance was in May 2015!

The briquette manufacturing plant consists of the following components:

• Pull floor with NEUSON hydraulic system
- Discharge capacity 20 - 80 m³/h
- Base area LxW 12.3 x 6.2 m
- Total backfill height 5 - 6 m
- Storage volume approx. 420 m³
- Material conveyed (wood chip - sawdust mix)
- Moisture 80 - 110%
- Bulk weight 150 - 370 kg/m³
- Hydraulic unit 45 kW
- Push rods 4 pcs

• Vibration channel V 100/7500

• KNOBLINGER KFD-O-880x750x16.500 trough chain conveyor
- Motor 5.5 kW
- Installation position horizontal / 55° rising
- Double-strand conveyor chain with screwed-on special drivers

• SF sreeninc machine & Födertechnik ASS-600-D vibratory screening machine
- Material conveyed (wood chip - sawdust mix)
- Moisture 80 - 110%
- Bulk weight 150 - 370 kg/m³
- Screening passes max. 3 pcs.
- Below-mounted swing drive
- Lateral screen changer
- Troughed chain conveyor TKF 600/500x22,500

• STELA BT 1/6200-18 belt drying and dosing system
- Material receiver tank with a capacity of 10 m³
- Double spiral discharger TS 2x630x4550 with an output of 10 - 80 m³/h
- Modular construction with screw connection
- Adjustment range of dumping height
- Humidity measurement
- Control of air volume and heat quantity
- Dwell time drying 6 - 30 min in active zone
- Drying temperature approx. 75° C
- Dryer input power
(Sawdust approx. 10.5 to/h and wood chips approx. 7.4 to/h)
- Dryer output power
(Sawdust approx. 5.87 to/h and wood chips approx. 4,6 to/h)
- 2 pcs. extraction fans with motor each 75 kW

• KNOBLINGER TKF 600/500x17.000 troughed chain conveyor
- Conveyor output 80 m³/h
- Bulk weight 125 - 180 kg/m³

• CF NIELSEN BP 6500 automatic briquetting extrusion presses
- 4 pcs. NIELSEN briquetting presses
- 2 pcs. dosing silo SS6 with contents approx. 8 - 12 m³
- Connection per press approx. 55 kW
- Performance per press approx. 1.800 kg/h

• Chip extraction system
- Connection on presses and chop saws

• Cooling tracks
- 4 pcs

• CF NIELSEN BS 350 extrusion chop saws
- 4 pcs NIELSEN chop saws

• MEURER CMB/K 60 2 pcs. packaging systems
- 2 pcs. MEURER packaging system

• OKURA SEALING-SYSTEM A 1600 III palletizing robot

• LANTECH pallet film winder

• Control cabinets and visualization/ control station

이 카테고리 내에서 구매 가능한 기계들

분류
이름
이름
위치
위치
입찰 수량
입찰 수량
현재 입찰가
현재 입찰가
마감 시간
마감 시간
 
기계
이름
위치
입찰
현재
입찰
마감 여부
 
 
NIELSEN BP 5500 HD Line Briquette Press NIELSEN BP 5500 HD Line Briquette Press
요구대로 언제든지
SPÄNEX SHB 250 K1 단광화법 SPÄNEX SHB 250 K1 단광화법
5771 Leogang, Österreich
요구대로 언제든지
위로 가기