relevante machine suggesties MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

MAZAK VARIAXIS 630-5 X II 5-Axis Machining Center
2 Gebote
62,000 €
15-12-2016
12:38
HYUNDAI SPT V 32 S 405 Vertical Machinecentrum
0 Gebote
18,500 €
15-12-2016
13:52
MAZAK VARIAXIS 500-5 X 5-Axis Machining Center
1 Gebote
80,000 €
11-01-2017
14:09
Surplex - eenvoudig bieden!
Inschrijven
Kies een veiling
Bod
Meet weten
Drie manieren voor een succesvolle verkoop!
Aankoop
Veiling
Vermarkten
Meet weten

MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

Het artikel is op uw Volglijst
MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
MIKRON - AGIECHARMILLES HSM 400 U 5 AXIS MACHINING CENTER
VERKOCHT
   

Sorry, deze machine is verkocht

Ontdek gelijksoortige machines

Kosten en baten

veilingkosten   15%
BTW   * plus BTW
Leveringsvoorwaarden  
Kosten demontage & laden   1,600.00 € (binding)
Transportkosten   niet inclusief
Betalingsvoorwaarden  

Machine details

Naam   MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
Machinenr.   214865
Fabrikant   MIKRON - AGIECHARMILLES
Model / Type   HSM 400 U
Bouwjaar   2008
Machines beschikbaar vanaf   immediately
Machinekwaliteit   niet gecontroleerd
Machine locatie   40549 Düsseldorf, Deutschland

Technische details

Afmetingen ca.   2800 x 2000 x 2700 mm
Gewicht ca.   5500 kg

Omschrijving

Serial No. 107.87.00.204, with rotable tilting table, EROWA ROBOT COMPACT for 60 EROWA pallet spaces. The machine is constructed in portal design and a massive polymer construction guaranteed the introduction of occuring inertia and machining force into the machine frame. This guaranteed highest accuracy of the traverse distance. The moving parts are loaded on linear compact roller guides, which guaranteed a long service life and adhesion motion control as well as for difficult cutting performance. The machine table is performed as large construction. The HSM series is generated for high speed shaping.

Technical details:
- Travel X-axis 400 mm, Y-axis 240 mm, Z-axis 350 mm, B-axis + -110 degrees. C-axis N x 360 degrees
- max. accelerating force X/Y: 10,75/8,35 kN; Z: 4 kN
- rapid traverse rate X/Y/Z: 80 m/min
- spindle speed range 100 - 42.000 rpm
- spindle holder HSK - E 40
- spindle power at 40 % ED 13 kW, spindle power at 100 % ED 10 kW
- turning moment at 60 % ED 4,25, turning moment at 100 % ED 3,2 Nm
- tool changer for 68 tool holder
- chip to chip time VDI 2852 12,5 sek
- tool changer time (TC 36 / 68) 10,0 sek

Equipment:
- ARO paper belt filter system P 750 / 1000 100 l/min with diverse paper reels
- Haidenhain iTNC 530 2P CNC control for 5-axis processing
- EROWA ITS 148 swivel table changer system
- EROWA pallet changing system for 60 pallet spaces (no pallet table is incluced in delivery)
- infrared edge finder, type 4411 32.00
- BURN filtration plant WK 5806 - C 25
- documentation in german language
- chip conveyor
- diverse spare parts in plastic boxes

Dimensions:
- EROWA pallet changer system approx. 1500 kg, 1020 x 2150 x 2700 mm
- chip conveyor approx. 800 kg, 2700 x 800 x 1500 mm
- paper belt filter system approx. 400 kg, 1850 x 1000 x 1350 mm
- filter system approx. 300 kg, 670 x 850 x 1400 mm
- 1 pallet accessories approx. 100 kg, 2100 x 1000 x 400 mm

For further details please have a look at the attached copy of operating instructions and the attached videos. A video was shot in sellers Company, the other one was created after the dismantling.
The machine was taken on 07.15.2015 stock place into operation. The machine control (HEIDENHAIN iTNC 530) examined, tested axis functions in jog mode. The main spindle has not been used to prevent damage (spindle cooling unit without coolant emulsion) in operation. A manual / mechanical inspection of the spindle had apparently no errors. There was no noise, yet determined mechanical / electrical damage in the axle. The technician confirmed that the machine is in a very good condition. On request we will send you a copy of the installation report. Finally the machine was professional pepared for the transport.
Naar boven