EGURKO ORTZA UNIK 15/8 Kantenaanlijmmachine

• Edgebander
• Serial number 8657401
• Total installed power approx. 31 KW
• Edge thickness from 0.40 mm up to 8 mm
• Worpiece thickness from 8 mm up to 40 mm
• Minimum workpiece lenght 120 mm
• Minimum workpiece width 120 mm
• Feed speed 16 m/min
• Feed motor 2.20 KW
• Control
• Joint trimming unit, 2 x motors
• Edge feeder for strips and roll, edge magazine for one edge coil
• Gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+3) rollers
• End trimming unit, 1 x motor 0.45 KW-12000 rpm
• Rough trimming unit, 1 x upper motor 1.12 KW-12000 rpm
• Profile trimming unit, 2 x upper motor 1.00 KW-12000 rpm, 2 x lower motor 0.30 KW-12000 rpm
• Profile scraping unit
• Edge buffing unit, 2 x motor 0.37 KW-1500 rpm
• Milling group, motor 3 KW Vertaling tonen