EGURKO ORTZA UNIK 2 DN Kantenaanlijmmachine

• Edgebander
• Serial number 861887
• Total installed power approx. 25 KW
• Edge thickness from 0.40 mm up to 4 mm
• Worpiece thickness from 8 mm up to 40 mm
• Minimum workpiece lenght 120 mm
• Minimum workpiece width 120 mm
• Feed speed 16 m/min
• Feed motor1.50 KW
• Control
• Joint trimming unit, 2 x motor 3 KW-3000/6000 rpm
• Edge feeder for strips and roll, edge magazine for one edge coil
• Gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+2) rollers
• End trimming unit, 1 x motor 0.45 KW-12000 rpm
• Rough trimming unit, 1 x upper motor 1.12 KW-12000 rpm
• Profile trimming unit, 2 x upper motor 0.60 KW-12000 rpm, 2 x lower motor 0.30 KW-12000 rpm
• Profile scraping unit
• Edge buffing unit, 2 x motor 0.37 KW-1370 rpm Vertaling tonen