relevante machine suggesties HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant

HOMAG Optimat KL 77/A20/S2 Kantenaanlijmmachine
0 Gebote
6,500 €
15-12-2016
10:00
HOLZHER SPRINT 1411 K Edge Banding Machine
59 Gebote
7,000 €
06-12-2016
09:27
OTT Altantic Edge Banding Machine
0 Gebote
5,500 €
15-12-2016
12:23
BRANDT KD 68 Kantenaanlijmmachine
10 Gebote
900 €
15-12-2016
10:22
Surplex - eenvoudig bieden!
Inschrijven
Kies een veiling
Bod
Meet weten
Drie manieren voor een succesvolle verkoop!
Aankoop
Veiling
Vermarkten
Meet weten

HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant

Het artikel is op uw Volglijst
HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant
HOMAG POWER KFR 620 & PROFI TBH 510 DOUBLE-SIDED EDGE BANDING PLANT
VERKOCHT
   

Sorry, deze machine is verkocht

Ontdek gelijksoortige machines

Kosten en baten

Leveringsvoorwaarden  
Transportkosten   niet inclusief
Betalingsvoorwaarden  

Machine details

Naam   HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant
Machinenr.   224127
Fabrikant   HOMAG & BARGSTEDT
Model / Type   Power KFR 620 & Profi TBH 510
Bouwjaar   2008
Machines beschikbaar vanaf   at once
Machinekwaliteit   goed
Machine locatie   Italië

Technische details

randdikte   0,4 - 3 mm
dikte werkstuk   max. 60 mm
holtebreedte   max. 3000 mm
stopnokken   ja / yes
hakselunit   ja / yes
lijmunit   AP 50 / QA 50 / C
knipunit   HK13 Servo
ruwe trimunit   ja / yes
fijne trimunit   MF21
profiel trimunit   FK23 Servo
universele trimunit   ja / yes
vlakschaafunit   FA10
profielschraper-unit   MN21
bediening   Power Control PC 22, WoodLine PC 52
Afmetingen ca.   40000 X 24000 x 5500 mm
Gewicht ca.   59000 kg

Omschrijving

High-end-equipped HOMAG Power KFR 620 & BARGSTEDT Profi TBH 510 double-sided formatting and edge banding line for flexible furniture manufacturing.
The HOMAG edge banding line has only very few operating hours (approx. 1,200 hours), as the plant was shut down shortly after commissioning.
The HOMAG Power edge banding line is still at the same place where it was originally built up.

The HOMAG & BARGSTEDT edge banding line is equipped with Power Control PC 22, WoodLine control PC 52, barcode scanner and flexible edge sequence control. The original price of the HOMAG edge banding line is over € 3.5 million.

The HOMAG Power Line consists of the following components:


M0201 BARGSTEDT Profi TBH 510/D/42/12/S feeding system, double-sided lenthwise
For continuous feeding of assembly lines (fixed edge on the left). Base board or pallet discharge via roller track, manual removal. The plant is equipped with a mangle roller for continuous workpiece handling.

Technical data:
- Workpiece size min. 250 x 195 x 12 mm
- Workpiece size max. 3000 x 1200 x 60 mm
- Workpiece weight max. 75 kg
- Stack weight max. 5000 kg
- Storage transport v 30 - 110 m/min.
- Conveyor transport v 10 - 50 m/min.
- Layer pattern single-track, 1 - 4 parts per track
- Travelling side strap
- Roller conveyor THR 800/L/40/46/12 with a length of 4590 mm and a width of 1200 mm


M0202 HOMAG Power KFR 620/16/QA/15 Double-sided formatting and edge banding machine
Fix fence side right, moveable side left.
The Homag Power KFR 620 has a high-performance package feed up to max. 80 m/min.

Technical data and aggregates:
- Feed steplessly adjustable 10 - 40 m/min.
- Workpiece overhang 40 mm & 30 - 80 mm (2x manual)
- Workpiece thickness 8 - 60 mm
- Working width double-sided min. 240 - 270 mm
- Working width double-sided max. 1500 mm

Release agent application via spray nozzles

Compact double hogger lengthwise
- 2 motors each 8.1 kW
- Motor shaft T 40 mm, L 75 mm
- Stepless axis vertical & horizontal

Standard milling unit
- 1 motor 4.5 kW
- Electropneumatic control for insert milling
- Swivel range 90 °
- Stepless axis horizontal

Workpiece blowing system and workpiece preheating up to 60 mm

High-Performance gluing unit AP 50 with 6-roller magazine
- Hot melt aggregate QA50
- Glue roller D 50 mm
- Flexible edge sequence control
- Edge hold-down clamp with stepless axis
- Pressure zone C with 6 repressing zone C with 6 repressing rollers and stepless axis
- Release agent vie spray nozzles

Rough trimming unit top/bottom
- 2 Motors each 0.55 kW

Multi milling unit MF21
- 2 Motors each 0.55 kW
- Probing at feed over über 40 m/min

Multi-soft cleaning unit MN21 top/bottom
- For max. 3 different profiles
- Probing at feed over 40 m/min

Finishing unit FA10 glued joint top/bottom
- Controlled

Standard milling unit
- 1 motor 6.6 kW
- Electropneumatic control for insert cutting
- Swivel range 90 °
- Stepless axis vertical, horizontal & swivel (left side)

M0203 BARGSTEDT Profi TSP 420/40/42/12 portal feeding and removing system

Technical data:
- Carriage beam length 4000 mm
- Travel and lift drive v = max. 144 m/min.
- Suction beam ST 30/42/12
- Workpiece lengths 3000 - 4250 mm
- Workpiece widths 240 - 1200 mm
- Workpiece weight max. 100 kg
- Roller conveyor TFR 560/S/28/71/12
- Roller conveyor THR 800/L/40/49/12
- Base board magazine TPA 800/R/40/12/05


M0204 HOMAG Profi curved belt 90°
Transport belt sliding down on a steel sliding table, with ball-bearing mounted drive and tension drum

Technical data:
- Swivel angle 90 °
- Swivel direction to the right
- Fixed edge on the right
- Conveyed load max. 100 kg
- Conveying speed 10 - 80 m/min


M0205 HOMAG Power TWR 22/30/12 angular transfer lengthwise - cross
For takeover of workpieces from longitudinal direction and transfer to the inlet magazine of the cross machine in two levels via falling chute.

Technical data:
- Feed 20 - 60 m/min.
- Feed power package 30 - 120 m/min.
- Workpiece thickness single drive 10-11,5 bis 60 mm
- Workpiece thickness magazine drive 12 - 30 mm
- Workpiece length 250 - 3000 mm
- Workpiece width 220 - 1200 mm
- Workpiece weight max. 40 kg
- Infeed roller conveyor L approx. 7200 mm


M0206 HOMAG Power KFR 620/26/QA/30 double-sided formatting and edge banding machine

Technical data and aggregates:
- Feed steplessly adjustable 10 - 50 m/min.
- Workpiece overhang 40 mm & 30 - 80 mm (3x manual)
- Workpiece thickness 8 - 60 mm
- Working width double-sided min. 240 - 270 mm
- Working width double-sided max. 3000 mm

Inlet magazine TW22
- Chain conveyor extension MII+1000
- Workpiece width before cam 220 - 1200 mm
- Stop cams stepless heights, max. 25 mm
- Pitch 500 mm

Central support with roller rail

Release agent application via spray nozzles

Compact double hogger longitudinal - cross
- 1 motor 4.5 kW
- 2 motors each 8.1 kW
- Motor shaft D 40 mm, L 75 mm
- Stepless axis vertical & horizontal

Standard milling unit
- 1 Motor 4.5 kW
- Electropneumatic control for insert cutting
- Swivel range 90 °
- Stepless axis horizontal

Workpiece blow-off unit and workpiece preheating up to 60 mm

High-performance gluing unit AP 50 mit 6-roller magazine
- Hot-melt adhesive unit QA50
- Glue roller D 50 mm
- Flexible edge sequence control
- Edge hold-down clamp with stepless axis
- Pressure zone C with 6 repressing rollers and stepless axis
- Release agent application via spray nozzles

End trimming unit Servo HK13
- 2 Motors each 0.4 kW
- Motion sequence horizontal via line controlled servo drive
- Stationary snipping stop
- Feed speed max. 50 m/min.
- Chamfer max. 30 °
- Electropneumatic conversion from chamfer to straight lines

Pre-milling unit top/bottom
- 2 motors each 0.55 kW

Form milling unit servo FK23
- 2 motors each 0.4 kW
- Automatic 8-fold tool changer
- Feed max. 35 m/min.
- Cycle rate max. 35 cycles/min.

Multi-soft cleaning unit MN21 top/bottom
- for max. 3 different profiles
- Probing at feed over 40 m/min

Finishing unit FA10 glued joint top/bottom
- Controlled

Standard milling unit
- 1 motor 6.6 kW
- Electropneumatic control for insert cutting
- Swivel range 90 °
- Stepless axis vertical, horizontal & swivel (left side)


M0207 HOMAG Power TDR 53/30/12 high-performance turning station longitudinal - cross

Technical data:
- 2 driven turning cones
- electronic height adjustment on workpiece thickness
- Workpiece length 250 - 3000 mm
- Workpiece width 220 - 1200 mm
- Feed at inlet 20 - 60 m/min.
- Feed at outlet 25 - 100 m/min.


M0208 BARGSTEDT PROFI TSH 510/D/30/12 stacking system, double-sided lengthwise
For continuous stacking behind production lines (fix edge on the left). The plant is equipped with a mangle roller for the continuous workpiece handling.

Technical data:
- Workpiece size min. 250 x 195 x 12 mm
- Workpiece size max. 3000 x 1200 x 60 mm
- Workpiece weight max. 75 kg
- Stacking weight max. 3500 kg
- Reception transport v 30 - 110 m/min.
- Conveyor transport v 10 - 50 m/min.
- Double sword brush System WANDRES DSH46
- Roller conveyor THR 800/L/40/33/12
- Sliding carriage THS 800/L/40/33/12
- Base board magazine and distribution system TPA 600/40/18/08
- Pallet magazine TPP 200/12/08

Beschikbare machines in deze categorie

Sorteer per
Naam
Naam
Locatie
Locatie
Aantal biedingen
Aantal biedingen
Aktuele bod
Aktuele bod
Sluittijd
Sluittijd
 
Machine
naam
Locatie
Biedingen
Aktueel
bod
Sluiten
 
 
HOMAG - BARGSTEDT - WEEKE Power KF 20 - TBH 22 - TSH 22 - BST 100 Dubbelzijdige randafwerkingsmachine HOMAG - BARGSTEDT - WEEKE Power KF 20 - TBH 22 - TSH 22 - BST 100 Dubbelzijdige randafwerkingsmachine
Oostenrijk
op verzoek op elk moment
HOMAG POWER LINE KFR 24/27/29/QA/30 Dubbelzijdige randafwerkingsmachine HOMAG POWER LINE KFR 24/27/29/QA/30 Dubbelzijdige randafwerkingsmachine
Italië
op verzoek op elk moment
STEFANI Major/Flex Dubbelzijdige randafwerkingsmachine STEFANI Major/Flex Dubbelzijdige randafwerkingsmachine
31051 FOLLINA, Italien
op verzoek op elk moment
Naar boven