podobne maszyny – sugestie Okleiniarka BRANDT KD79 A FQ

Okleiniarka BRANDT KD 68
11 Gebote
950 €
15.12.2016
10:25
BRANDT OPTIMAT KD 77-C Edge Banding Machine
15 Gebote
2,050 €
16.12.2016
10:04
Okleiniarka BRAND KD 86
0 Gebote
2,000 €
15.12.2016
11:26
Okleiniarka BRANDT KD 84
3 Gebote
700 €
16.12.2016
11:52
Licytacja w Surplex - to takie proste!
Zarejestruj się
Wybierz aukcję
Licytuj
Dowiedz się więcej
Trzy sposoby na skuteczną sprzedaż!
Skup
Aukcja
Marketing
Dowiedz się więcej

Okleiniarka BRANDT KD79 A FQ

Ten przedmiot jest na Twojej Obserwowane

Przepraszamy, ta maszyna została już sprzedana

Zobacz podobne dostępne maszyny

Usługi i koszta

opłata aukcyjna   15%
PTU   *plus VAT
Warunki dostawy   z zakładu, ładowane na ciężarówkę
Koszta transportu   nie zawiera
Warunki płatności   100% zapłata przed odbiorem

Szczegółowe informacje na temat maszyny

Nazwa   Okleiniarka BRANDT KD79 A FQ
Nr maszyny   328263
Producent   BRANDT
Model / Typ   KD79 A FQ
Rok produkcji   2000
Maszyna dostępna od   immediately
Stan maszyny   niesprawdzony
Lokalizacja maszyny   12030 Marene (CN), Italien

Dane techniczne

Wymiary (dł. x szer. x wys.)   7000 x 2300 x 1700 mm
Waga ok.   3000 kg

Opis przedmiotu

EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles , GENERAL SPECIFICATIONS, Industrial machine with heavy-duty structure, Applicable banding material in coils: thin edge and PVC up to 3 mm, Applicable banding material in strips: solid wood up to 12 mm , SYSTEM AND OPTIONALS OF THE PANEL HANDLING, Running driving chain, Top pression unit made by lines of idle wheels, Top pression unit with adjustable height in automatic by numerical control, Double feeding speed 11/ 14 m/min, Input panel guide is motorized and with adjusting in automatic by numerical control, Lateral bar with lines of idle wheels to support the panels , WORKING UNITS ON THE SQUARING SIDE, Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2.2 KW , GLUING UNIT, INSERTION AND PRESSION OF THE EDGE , Support for edge coil, Hot-melt glue pot and premelter , Spreading roller to regulate the quantity of apllied glue, Guillotine to cut the edge in coils, Roller set to press the edge on straight profiles - nr. 1 + 3 pression rollers - motorized regulation of depth position in automatic by numerical control , WORKING UNITS ON THE EDGE BANDING SIDE, End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 / 15 degree - tilting regulation in automatic - motors power 0.35 KW, Top and bottom rough trimming unit - motors power 0.55 KW, Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 25 degree - motorized regulation of tilting in automatic by numerical control - motors power 0.55 KW, Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 25 degree - regulation of the tilting by hand with visual unit - motors power 0.55 KW, Rounding unit - nr. 2 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.35 KW, Edge scraping unit for the edge superfinishing , Brushing unit with motors to clean and polish the upper and lower edge , CONTROL OF THE MACHINE AND ACCESSORIES, Control and program system NC 16 with the following features: - visual display, Adjustable hanging command board to control the machine , Incorporated electrical cabinet , NORM AND OPTIONAL FOR THE SECURITY, Security norme CE mark, Safety and sound-proof enclosure cabinet of the working units , Aspiration system on the top part of the safety enclosure cabinet
Do góry