Maszyny używane Surplex
Sprzedaj Surplex Trust

Tartak NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10

Poproś o ofertę
Obserwuj
Czy masz jakieś pytania w odniesieniu do maszyny? Proszę skontaktuj się z nami.

Maximilian Berger
Telefon: +49 211422737866
Telefon komórkowy: +49 1742417737
E-mail: maximilian.berger@surplex.com

Szczegóły

Drukuj
Nazwa: Tartak NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10
Nr maszyny: 501609
Producent: NIENKEMPER
Model / Typ: VBS 16 mit Blockwagen Typ BWH 10
Dokumenty:
Reparaturteile.pdf
Grundriss.pdf
techn._Zeichnungen_Schaltplaene.pdf
Reperaturaufstellung.pdf
Rok produkcji: 1982 - 1984
Maszyna dostępna od: immediately
Stan maszyny:
Lokalizacja: Niemcy, 49424 Goldenstedt
Warunki dostawy: FCA Goldenstedt, załadunek na ciężarówkę
Koszt rozbiórki i załadunku: 7,500€ (wiążąca)
Koszta transportu: nie zawiera
Warunki płatności: 100% zapłata przed odbiorem
Wymiary (dł. x szer. x wys.): 81600 x 2400 x 3900 mm
Waga ok.: 40000 kg
General Overhauled Log Band Saw NIENKEMPER VBS 16 with Log Carriage Type BWH 10 Sawmill / Vertical Log Band Saw

- Nienkemper bandsaw VBS 16 with block carriage BWH 10 was fully overhauled between 2017 and 2018. The overhaul had a value of approx. 110000 € of which approx. 55000 € are spare parts included (for more details see appendix),

- Round timber cross conveyor 5 strands up to 11 m long timber (incl. lifting legs)
Drive shafts for transport chains as well as transport chains for the cross conveyor no longer available, lifting leg equipped with chains and with 3 hydraulic lifting cylinders,
(loading dimensions [mm] approx. 7000 x 2400 x 2500, weight [kg] approx. 6000),

- Nienkemper band saw VBS 16 / general overhauled
the frame for the rollers and the saw blade is completely overhauled (frame, shafts, bearings, electrics or wiring),
the diameter of the roller for the saw blade is approx. 1600 mm, the width of the mounting surfaces is approx. 200 mm and resharpened, the shafts and bearings have also been reworked,
belt pulley diameter approx. 800 mm, mounting surfaces approx. 230 mm wide and resharpened,
frame with two edgers and exhaust for mounting on the band saw, saw blade diameter approx. 500 mm, length of the adjusting shaft approx. 2350 mm, 4 actuator (2 for adjustment in Z-direction, 2 for adjustment in Y-direction),
(Loading dimensions [mm] approx. 2400 x 2400 x 6000 Weight [kg] approx. 6000),

-Block Carriage BWH 10 / general overhauled
the block carriage has a turning function, otherwise the bearings, chains, collets, electrics, running surfaces and rails, feed rails and unit, etc. are fully overhauled,
loading dimension [mm] 10000 x 2400 x 2400, weight [kg] 80000),

- Track frame 24m long rebuilt by Nienkemper
(loading dimension [mm] approx. 6000 x 1800 x 1800, weight [kg] approx. 4000),

- Swing-out set-down roller conveyor 5-strand approx. 3895 mm x 7100 mm
(loading dimensions [mm] approx. 4000 x 7500 x 1000, weight [kg] approx. 4000),

- Roller conveyor with pull-off cross conveyor "left and right" approx. 1100 mm x 12350 mm
(loading dimension [mm] approx. 7000 x 2400 x 2400, weight [kg] approx. 4000),

- lowerable cross conveyor 5 strands approx. 2500 mm x 5610 mm
(loading dimension [mm] approx. 6000 x 1000 x 2500, weight [kg] approx. 3000),

- Stacking aid scissor lift table lowerable approx. 1200 mm x 7150 mm, stroke length approx. 1000 mm,
(loading dimensions [mm] approx. 7500 x 2000 x 2000, weight [kg] approx. 4000),

- Suction device for the band saw (with pipes and fan),

- Log band saw is already dismantled
Surplex App - teraz także dla Androida!
Pobierz za darmo:
iPhone & iPad
Android

Dostępne maszyny w tej kategorii

Mogente
 
Obserwuj
Szczegóły
Poproś o ofertę
na zamówienie
Mogente
 
Obserwuj
Szczegóły
Poproś o ofertę
na zamówienie
Pinsdorf
 
Obserwuj
Szczegóły
Poproś o ofertę
na zamówienie


Ostatnio oglądane maszyny

liście obserwowanych
Usunięto artykuł. Cofnij