Leilão Machines and Accessories for Metal Processing

CHIRON DZ 12 W 3-axis vertical machining center

CHIRON DZ 12 W 3-axis vertical machining center
N.º de lote 2
O leilão terminou.
O leilão terminou
Está interessado neste artigo?
Solicite uma oferta sem compromisso.
Nome
CHIRON DZ 12 W 3-axis vertical machining center
Número de artigo
964791
Fabricante
CHIRON
Tipo
DZ 12 W
Documentos
Spezifikation_Chiron_339-44.pdf
Vídeos
Vídeo 1
Ano de construção
2015
Artigo disponível a partir de
immediately
Estado do artigo
Local
Alemanha, 73630 Remshalden-Grunbach
Custos de desmontagem e de carregamento (fixação)
3 000,00 €
Custos de transporte
não incluído
Condições de entrega
FCA Remshalden-Grunbach, carregamento em camião
Condições de pagamento
100 % do pagamento antes da recolha
Curso z
400 mm
Percurso x
550 mm
Percurso y
400 mm
Comando
SIEMENS CNC-Steuerung 840D solution line
Peso aprox.
10 000 kg
Dimensões em planta aprox. (CxLxA)
6 100 x 2 500 x 2 800 mm
  • Serial number: 339-44
  • Operating hours: 47,253
  • Belt filter system
  • Chip conveyor
Integrated workpiece changing device IWW 0/180°
for optimum chip fall with center partition made of sheet steel

with 2 integrated 2-spindle dual-axis tables CHIRON CASD 280-2
  • Workpiece changeover time approx. 3.5 s depending on weight
  • Self-regulating thanks to self-learning speed control

Integrated on each side of the table:

NC swivel axis CRT 200 as A-axis
  • Swivel angle - 10° / + 138°
  • Repeat accuracy ± 5” with
  • absolute, direct measuring system ECN 225
  • Torque motor drive
  • via backlash-free preloaded precision gears
  • Very high overload capacity
  • max. transmittable torque 1,200 Nm
  • Speed 42 min-1
NC rotary table as C-axis
  • 2 x face plate ø 245 mm
  • prepared for setting up a positioning and clamping system
  • Spindle distance a = 250 mm ± 0.005 mm
  • Repeat accuracy ± 5” with
  • absolute, direct measuring system ECN 225
  • digital direct drive by torque motor
  • max. transmittable torque 180 Nm
  • with pneumatic clamping
  • Holding torque 690 Nm
  • max. transport load 75 kg per face plate
  • Speed 200 min-1
  • Bridge dimension 540 mm
Counter bearing without drive
  • 4th, 5th and 6th NC axis
  • smallest input step 0.0001°
  • Pneumatic connection controlled for sealing air
  • Pneumatic connection controlled for clamping
  • Central hydraulic or pneumatic rotary feed-through
  • 6-core, integrated in A- and C-axis
Main spindle drive with 2 AC motors
  • water-cooled, pressurized with sealing air,
  • with tool clamping monitoring
  • 24.5 kW at 100% duty cycle
  • 40.0 kW at 25% duty cycle
  • Speed up to 15,000 min-¹
  • Torque max. 45 Nm
  • Speed acceleration from 0 to 15,000 min-¹
  • or deceleration in 0.6 seconds
  • Drilling capacity 2 x Ø 25 mm
  • Thread cutting 2 x M 20
  • Milling capacity 2 x 120 cm³/min
  • in E335 steel
Automatic tool changer
  • Robust, fully encapsulated pick-up chain magazine
  • with mechanical collision protection and taper cleaning
  • Tool positions 2 x 32
  • Tool taper HSK-A 50 DIN 69893
  • Tool diameter max. 60 mm
  • Tool length max. 250 mm
  • Tool weight max. 3 kg
  • Tool change time approx. 0.9 s (depending on control)
  • Chip to chip time approx. 2.4 s (depending on control)
Additional automatic tool changer
  • Robust, fully encapsulated pick-up chain magazine
  • With mechanical collision protection and taper cleaning
  • Tool positions 2 x 32
  • Tool taper HSK-A 50 DIN 69893
  • Tool diameter max. 60 mm
  • Tool length max. 250 mm
  • Tool weight max. 3 kg
  • Tool change time approx. 0.9 s (depending on control)
  • Chip to chip time approx. 2.4 s (depending on control)
Additional automatic tool changer
  • per magazine: tool places 2x32
  • Total 2 x 64 tool places
  • Version in 12.4 (2 magazine shafts).
Feed drive for X-, Y- and Z-axis
  • Digital direct drives with indirect absolute path measuring systems
  • Rapid traverse speed 75 - 75 - 75 m/min
SIEMENS CNC control 840D solution line
(PCU 50 / NCU 730.3, 1 channel)
  • incl. 10.4” TFT color screen / full keyboard / OP010S control panel
  • Windows XP operating panel logic
  • NC working memory 5 MB (freely available max. 3 MB)
  • (freely available max. 200 programs)
  • for the processing of part programs according to DIN 66025
  • Hard disk with approx. 20 GB freely available
  • Power display
  • Operating hours and parts counter on screen
Mostrar tradução
Tradução automática
Nome do leilão
Machines and Accessories for Metal Processing
N.º de lote
2
Documentos
Termos e condições especiais do leilão
Visita
Local exato mediante pedido.
No fixed date. The items are in different locations (see item description).

Viewing by appointment only! Please contact us in advance at lqu@surplex.com for an inspection appointment.


Os nossos serviços
  • Assistência personalizada em 16 idiomas
  • Aconselhamento no local e por peritos
  • Organização de transporte, se necessário
  • Apoio em termos de documentação e desalfandegamento