HAUSER S50-DR TEXT

Year of construction: probably 1986
Adjustment range:
In the X-axis (table slide): 900 mm
In the Y-axis (sanding head): 600 mm
In the W-axis (moving crossbeam): 635 mm
Feed speed:
In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min
In the W-axis, three-phase drive: approx. 800 mm/min
Measured value display:
Smallest display unit: 0.001 mm
Zero point can be selected as required
Positioning accuracy (basic deviation X, Y): 0.004 mm
Table:
Usable table surface: 1020 x 860 mm
Permissible table load: max. 800 kg
Width of the T-slots: 14 mm
Number of T-slots: 7
Distance between the T-slots: 100 mm
Working range of the sanding head:
Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm
With air turbines up to 100000 and 160000 rpm
Planetary speed, infinitely variable: 5 - 250 rpm
Stroke of the grinding spindle sleeve: max. 180 mm
Diameter of the grinding spindle sleeve: 100 mm
Radial infeed of the grinding wheel: 6 mm
Weight compensation of the grinding spindle sleeve: pneumatic
Capacity:
Cylindrical grinding (with wheel) diameter: 100 mm
Without intermediate plate: max. diameter 230 mm
With intermediate plate: max. diameter 360 mm
Sanding length Z (with mandrel): max. 125 mm
For further technical data see pictures
With technical documentation as shown in the pictures
With accessories as shown in the pictures, including 2 air turbines (types: T10 and T16)
Type T10:
Speed range: depending on air pressure 75000 - 100000 rpm
Type T16:
Speed range: depending on air pressure 120000 - 160000 rpm
With motor for groove grinding and other accessories (see pictures) Afișează traducerea