Utilajele second hand de la Surplex
Vinde Surplex Trust

NOVA PELLET N-PLUS Wood Pellets Line
România, 030595 București

Solicitați o ofertă
Aveți întrebări în legătură cu mașina? Va rog sa ne contactati.
Hennadii Chernyshuk

Hennadii Chernyshuk
Telefon: +49 21142273773
Celular: +49 15228565925
E-mail: hennadii.chernyshuk@surplex.com


Nume: NOVA PELLET N-PLUS Wood Pellets Line
Utilajul nr.: 546952
Producător: NOVA PELLET
Modelul/ Tipul: N-PLUS
Anul de fabricație: 2013
Utilaje disponibile de la: immediately
Condiția utilajului:
Locație: România, 030595 București
Termeni de livrare: FCA București, încărcat în camion
Costuri de dezmembrare și încărcare: 10,000€ (obligatoriu)
Costuri de transport: nu sunt incluse
Termeni de plată: 100% din plată înainte de colectare
taxă/rezervă: În caz de export, valoarea TVA datorată se reține sub forma unei garanții. Garanția este returnată clientului prin transfer bancar de îndată ce ne-au fost înaintate toate documentele de export.
Greutate aprox.: 1 kg

Silo, metal construction with 12 m3 usable capacity (3100 mm x 2100 mm x 2100 mm), equipped with two independent hydraulic fume hoods.
Hydraulic power unit consisting of 70 l tank (hydraulic oil), 7.5 kW electric motor, hydraulic drive and safety block, radiator with fan for cooling oil, oil thermostat heater (for negative temperatures), pressure gauge for pressure, hose with connection insert, level indicator. The silo also has material level rotation indicators, a spiral conveyor for emptying. All drive elements are connected via a programmable automatic with the central unit, which monitors and coordinates the entire Pelletier line.


Hot air generator, robust construction, designed and engineered in Italy, lined with high-temperature resistant refractory material (Samota brick), cast iron furnace, 1200000 Kcal, fed by a spiral conveyor with wood material. Combustion inside the furnace is maintained by a fan of 2.2 kW (primary air), two fans of 0.25 kW and a fan of 0.55 kW, which generate heat energy of 1400 kW / h to remove water required are wet wood material, material with 35% humidity. The fire can be supplied with wood material in the form of a parallelepiped of maximum 15 mm x 15 mm x 5 mm (chips) or sawdust. For the ignition of the fire, the maintenance, the regular inspection, the generator is provided with an access door.

Flue gas outlet, made of longitudinally welded sections of rolled sheet metal, at the ends provided with drilled flanges for mounting. The basket is also lined outside protected with galvanized sheet, this is mounted above the hot air generator. Driven conveyor belt, driven by a 3 kW geared motor, leads the removal of the material from the silo's dewatering screw conveyor with wet material and its introduction into the hot air flow of the dryer

Drum Dryer / Rotary Dryer Model DD 15 Product
In Italy it is intended for drying of material resulting from technologies of wood processing, the dryer (rotary drum), is put in motion of a 7.5 kW geared motor with forced cooling. The dryer consists of three concentric cylinders of thick sheet steel, in particular ribbed steel, in which the suspension mixture is entrained by the flow of air continuously through the outlet into the gravity separation cyclone.

Properties of the dryer:
- maximum allowable grain size 20 mm,
- moist sawdust humidity (for parameter calculation) 50%,
- dry sawdust moisture (for parameter calculation) 12%,
- maximum wet intake flow 2640 kg / h,
- maximum flow rate of sawdust 1500 kg / h,
- Wood material consumption for the hot air generator 340 kg / h

Cyclone - dry matter - evacuation is
constructed of 0.8 mm sheet steel, reinforced and protected
through several layers of paint. Cyclone with a diameter of
1600 mm and about 6300 mm from the ground, intended for separation The mixture was taken from the dryer body and through this drained rotary valve, the dry material in 1.3 m3. Includes a 22 kW blower.


Inclined conveyor with 4kW geared motor
N-Sand Sand Trap equipped with two 0.3 kW Vibromotors
Magnetic separator CT1 30-40 with self-cleaning system

Mill with up to 1800 kg / h of dry material, 90 kW engine

Pneumatic conveyor 18.5 kW.

2 silos with filter bags diameter 3150 mm, height 8150 mm, level indicators, an automatic blasting system for cleaning filter bags and a fire extinguishing system equipped with sprinklers ascent ladder, two agitators

Mixing system with water spray system, level indicator and agitator

Nova pellets N-Plus pelleting press electric motor 132 Kw - 380 V, 50 Hz, production capacity 1200 - 1800 kg / h, depending on the material used.

Vibration sieve N-VB2000 for collecting the pellets

Cooling tower system N-CO2000

Lifting conveyor for transporting pellets


Pellets storage, depending on the mode of packing (big - bag of 1000 kg or polyethylene bag of 15 kg) are by means of a pneumatic system the
Pellets introduced into one of the two tanks of 4.5 m3.
Depending on the desired quantity, the packaging of the pellets is carried out by packaging in 15 kg polyethylene bags or in 1000 kg big bags.


PLC display with 10-inch touch screen.

Fire protection and prevention consisting of sensors for monitoring sparks, sprinklers, solenoid valves, central control unit and control, water basins, pumps, etc.
Surplex App - acum și pentru Android
Descarcă gratis:
iPhone & iPad

utilaje disponibile din această categorie

Linie de pelete de lemn
Linie de pelete de lemn Mașini de brichetat
Stara Zagora
Solicitați o ofertă
la cerere
Afișați produsul
Solicitați o ofertă

Utilaje văzute recent

Articole observate
Articolul a fost eliminat. Anula