подходящие станки - предложения HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant

Участвовать в торгах на Surplex - просто!
Зарегистрироваться
Выберите аукцион
Предложить цену
узнать больше сейчас
Три способа успешно продать ваш товар!
Покупка
Аукцион
Маркетинг
узнать больше сейчас

HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant

Этот предмет находится в список просмотров
HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant
HOMAG POWER KFR 620 & PROFI TBH 510 DOUBLE-SIDED EDGE BANDING PLANT
ПРОДАНО
   

Извините, это оборудование уже продано

Смотреть похожий товар

Затраты и выгоды

условия поставки   Франко завод (самовывоз)
Стоимость транспортировки   Не включено
условия оплаты   100% расчет в форме инкассо

Информация о станке

Имя   HOMAG Power KFR 620 & Profi TBH 510 Double-Sided Edge Banding Plant
Номер оборудования   224127
Производитель   HOMAG & BARGSTEDT
Модель / Тип   Power KFR 620 & Profi TBH 510
Год выпуска   2008
Оборудование можно забрать   at once
качество оборудования   в хорошем состоянии
Местоположение станка   Италия

Технические характеристики

толщина кромочного материала   0,4 - 3 мм
толщина заготовки   max. 60 мм
ширина обрабатываемой заготовки   max. 3000 мм
стопоры   ja / yes
измельчитель   ja / yes
клеевой аппарат   AP 50 / QA 50 / C
Торцовочный агрегат   HK13 Servo
Агрегат предварительного фрезерования   ja / yes
фрезерный агрегат   MF21
Агрегат профильного фрезерования   FK23 Servo
Универсальный фрезерный агрегат   ja / yes
агрегат для циклевания плоских поверхностей   FA10
агрегат для циклевания кромок   MN21
управление   Power Control PC 22, WoodLine PC 52
Pазмеры, примерно   40000 X 24000 x 5500 мм
Приблизительный вес   59000 кг

Описание

High-end-equipped HOMAG Power KFR 620 & BARGSTEDT Profi TBH 510 double-sided formatting and edge banding line for flexible furniture manufacturing.
The HOMAG edge banding line has only very few operating hours (approx. 1,200 hours), as the plant was shut down shortly after commissioning.
The HOMAG Power edge banding line is still at the same place where it was originally built up.

The HOMAG & BARGSTEDT edge banding line is equipped with Power Control PC 22, WoodLine control PC 52, barcode scanner and flexible edge sequence control. The original price of the HOMAG edge banding line is over € 3.5 million.

The HOMAG Power Line consists of the following components:


M0201 BARGSTEDT Profi TBH 510/D/42/12/S feeding system, double-sided lenthwise
For continuous feeding of assembly lines (fixed edge on the left). Base board or pallet discharge via roller track, manual removal. The plant is equipped with a mangle roller for continuous workpiece handling.

Technical data:
- Workpiece size min. 250 x 195 x 12 mm
- Workpiece size max. 3000 x 1200 x 60 mm
- Workpiece weight max. 75 kg
- Stack weight max. 5000 kg
- Storage transport v 30 - 110 m/min.
- Conveyor transport v 10 - 50 m/min.
- Layer pattern single-track, 1 - 4 parts per track
- Travelling side strap
- Roller conveyor THR 800/L/40/46/12 with a length of 4590 mm and a width of 1200 mm


M0202 HOMAG Power KFR 620/16/QA/15 Double-sided formatting and edge banding machine
Fix fence side right, moveable side left.
The Homag Power KFR 620 has a high-performance package feed up to max. 80 m/min.

Technical data and aggregates:
- Feed steplessly adjustable 10 - 40 m/min.
- Workpiece overhang 40 mm & 30 - 80 mm (2x manual)
- Workpiece thickness 8 - 60 mm
- Working width double-sided min. 240 - 270 mm
- Working width double-sided max. 1500 mm

Release agent application via spray nozzles

Compact double hogger lengthwise
- 2 motors each 8.1 kW
- Motor shaft T 40 mm, L 75 mm
- Stepless axis vertical & horizontal

Standard milling unit
- 1 motor 4.5 kW
- Electropneumatic control for insert milling
- Swivel range 90 °
- Stepless axis horizontal

Workpiece blowing system and workpiece preheating up to 60 mm

High-Performance gluing unit AP 50 with 6-roller magazine
- Hot melt aggregate QA50
- Glue roller D 50 mm
- Flexible edge sequence control
- Edge hold-down clamp with stepless axis
- Pressure zone C with 6 repressing zone C with 6 repressing rollers and stepless axis
- Release agent vie spray nozzles

Rough trimming unit top/bottom
- 2 Motors each 0.55 kW

Multi milling unit MF21
- 2 Motors each 0.55 kW
- Probing at feed over über 40 m/min

Multi-soft cleaning unit MN21 top/bottom
- For max. 3 different profiles
- Probing at feed over 40 m/min

Finishing unit FA10 glued joint top/bottom
- Controlled

Standard milling unit
- 1 motor 6.6 kW
- Electropneumatic control for insert cutting
- Swivel range 90 °
- Stepless axis vertical, horizontal & swivel (left side)

M0203 BARGSTEDT Profi TSP 420/40/42/12 portal feeding and removing system

Technical data:
- Carriage beam length 4000 mm
- Travel and lift drive v = max. 144 m/min.
- Suction beam ST 30/42/12
- Workpiece lengths 3000 - 4250 mm
- Workpiece widths 240 - 1200 mm
- Workpiece weight max. 100 kg
- Roller conveyor TFR 560/S/28/71/12
- Roller conveyor THR 800/L/40/49/12
- Base board magazine TPA 800/R/40/12/05


M0204 HOMAG Profi curved belt 90°
Transport belt sliding down on a steel sliding table, with ball-bearing mounted drive and tension drum

Technical data:
- Swivel angle 90 °
- Swivel direction to the right
- Fixed edge on the right
- Conveyed load max. 100 kg
- Conveying speed 10 - 80 m/min


M0205 HOMAG Power TWR 22/30/12 angular transfer lengthwise - cross
For takeover of workpieces from longitudinal direction and transfer to the inlet magazine of the cross machine in two levels via falling chute.

Technical data:
- Feed 20 - 60 m/min.
- Feed power package 30 - 120 m/min.
- Workpiece thickness single drive 10-11,5 bis 60 mm
- Workpiece thickness magazine drive 12 - 30 mm
- Workpiece length 250 - 3000 mm
- Workpiece width 220 - 1200 mm
- Workpiece weight max. 40 kg
- Infeed roller conveyor L approx. 7200 mm


M0206 HOMAG Power KFR 620/26/QA/30 double-sided formatting and edge banding machine

Technical data and aggregates:
- Feed steplessly adjustable 10 - 50 m/min.
- Workpiece overhang 40 mm & 30 - 80 mm (3x manual)
- Workpiece thickness 8 - 60 mm
- Working width double-sided min. 240 - 270 mm
- Working width double-sided max. 3000 mm

Inlet magazine TW22
- Chain conveyor extension MII+1000
- Workpiece width before cam 220 - 1200 mm
- Stop cams stepless heights, max. 25 mm
- Pitch 500 mm

Central support with roller rail

Release agent application via spray nozzles

Compact double hogger longitudinal - cross
- 1 motor 4.5 kW
- 2 motors each 8.1 kW
- Motor shaft D 40 mm, L 75 mm
- Stepless axis vertical & horizontal

Standard milling unit
- 1 Motor 4.5 kW
- Electropneumatic control for insert cutting
- Swivel range 90 °
- Stepless axis horizontal

Workpiece blow-off unit and workpiece preheating up to 60 mm

High-performance gluing unit AP 50 mit 6-roller magazine
- Hot-melt adhesive unit QA50
- Glue roller D 50 mm
- Flexible edge sequence control
- Edge hold-down clamp with stepless axis
- Pressure zone C with 6 repressing rollers and stepless axis
- Release agent application via spray nozzles

End trimming unit Servo HK13
- 2 Motors each 0.4 kW
- Motion sequence horizontal via line controlled servo drive
- Stationary snipping stop
- Feed speed max. 50 m/min.
- Chamfer max. 30 °
- Electropneumatic conversion from chamfer to straight lines

Pre-milling unit top/bottom
- 2 motors each 0.55 kW

Form milling unit servo FK23
- 2 motors each 0.4 kW
- Automatic 8-fold tool changer
- Feed max. 35 m/min.
- Cycle rate max. 35 cycles/min.

Multi-soft cleaning unit MN21 top/bottom
- for max. 3 different profiles
- Probing at feed over 40 m/min

Finishing unit FA10 glued joint top/bottom
- Controlled

Standard milling unit
- 1 motor 6.6 kW
- Electropneumatic control for insert cutting
- Swivel range 90 °
- Stepless axis vertical, horizontal & swivel (left side)


M0207 HOMAG Power TDR 53/30/12 high-performance turning station longitudinal - cross

Technical data:
- 2 driven turning cones
- electronic height adjustment on workpiece thickness
- Workpiece length 250 - 3000 mm
- Workpiece width 220 - 1200 mm
- Feed at inlet 20 - 60 m/min.
- Feed at outlet 25 - 100 m/min.


M0208 BARGSTEDT PROFI TSH 510/D/30/12 stacking system, double-sided lengthwise
For continuous stacking behind production lines (fix edge on the left). The plant is equipped with a mangle roller for the continuous workpiece handling.

Technical data:
- Workpiece size min. 250 x 195 x 12 mm
- Workpiece size max. 3000 x 1200 x 60 mm
- Workpiece weight max. 75 kg
- Stacking weight max. 3500 kg
- Reception transport v 30 - 110 m/min.
- Conveyor transport v 10 - 50 m/min.
- Double sword brush System WANDRES DSH46
- Roller conveyor THR 800/L/40/33/12
- Sliding carriage THS 800/L/40/33/12
- Base board magazine and distribution system TPA 600/40/18/08
- Pallet magazine TPP 200/12/08

Оборудование данной категории, имеющееся в наличии

сортировать по
Название товара
Название товара
Место
Место
Количество ценовых предложений
Количество ценовых предложений
Текущее предложение цены
Текущее предложение цены
Время закрытия
Время закрытия
 
Название оборудования
Место
Заявок
Текущ.
предложение цены
Закрытие
 
 
kromkoobrabatyvayuschiy stanok HOMAG - BARGSTEDT - WEEKE Power KF 20 - TBH 22 - TSH 22 - BST 100 Кромкообрабатывающий станок HOMAG - BARGSTEDT - WEEKE Power KF 20 - TBH 22 - TSH 22 - BST 100
Австрия
по запросу в любое время
HOMAG POWER LINE KFR 24/27/29/QA/30 kromkoobrabatyvayuschiy stanok HOMAG POWER LINE KFR 24/27/29/QA/30 Кромкообрабатывающий станок
Италия
по запросу в любое время
STEFANI Major/Flex kromkoobrabatyvayuschiy stanok STEFANI Major/Flex Кромкообрабатывающий станок
31051 FOLLINA, Italien
по запросу в любое время
наверх