relevantné návrhy strojov IDM Idimatic/66 Olepovačka bočných plôch

OTT Altantic Edge Banding Machine
0 Gebote
5,500 €
12-15-2016
12:25
Olepovačka bočných plôch BRANDT KD 68
10 Gebote
900 €
12-15-2016
10:24
Olepovačka bočných plôch HEBROCK EURO 2000
1 Gebote
1,000 €
12-15-2016
10:35
Surplex - zadať ponuku je celkom jednoduché!
Zaregistrovať sa
Vybrať aukciu
zadať ponuku
Ďalšie informácie
Tri spôsoby úspešného predaja!
Zakúpenie
Aukcia
Marketing
Ďalšie informácie

IDM Idimatic/66 Olepovačka bočných plôch

Táto položka je na vašom Zoznam sledovania
IDM Idimatic/66 Olepovačka bočných plôch
IDM IDIMATIC/66 OLEPOVAČKA BOČNÝCH PLÔCH
PREDANÉ
   

Ľutujeme, tento stroj sme už predali

Prezrite si podobné dostupné stroje

Náklady a služby

aukčný poplatok   15%
DPH   *plus DPH
Podmienky doručenia   naložené do kamiónu
Náklady na demontáž a nakládku   400.00 € (záväzné)
Náklady na dopravu   neobsahuje
Platobné podmienky   vyplatenie plnej sumy pred vyzdvihnutím

Podrobnosť stroja

Názov   IDM Idimatic/66 Olepovačka bočných plôch
Číslo stroja   185033
Výrobca   IDM
Model / typ   Idimatic/66
Rok výroby   1995
Stroj je k dispozícii od   11.17.2014
Stav stroja   prevádzkyschopný
Miesto   33070 BUDOIA (PN), Italien

Technické údaje

hrúbka hrany   0,4 - 5 mm
hrúbka obrobku   10 - 50 mm
min. šírka obrobku   140 mm
spojená orezávacia jednotka   2 x 2,2 kW
vyrezávacia jednotka   2 x 0,35 kW
Približné rozmery   7500 x 1400 x 2400 mm
Približná hmotnosť   3800 kg

Popis

•Edgebanding thickness capacity, 10 – 50 mm panel thickness, 60 mm minimum panel width & 140 mm minimum length

•Pre-milling station with (2) 3 HP – 12,000 RPM counter rotating vertical milling heads: both with pneumatic jump control, 30 mm spindles, fully enclosed by noise insulated cabin

•Gluing unit for edges up to 3 mm thickness, 56 mm height.

•Front & rear end trims (motors 0.5 HP – 12,000 RPM each), motors tilt 0° - 15° on horizontal plane, 45° chamfer cut with on/off on control.

•Top & bottom rough trims (motors 0,7 HP – 12,000 RPM each), (prepared for “quick change” of motors, for interchangeable 2nd set of bevel/radius trim units)

•Top & bottom fine/bevel/profile multi-function trims (motors 0.6 HP – 12,000 RPM each), tilts 0°- 10° for bevel and 3 mm PVC corner round (prepared for “quick change” of motors, for interchangeable 2nd set of bevel/radius trim units)

•Moulding unit (motor 2,5 HP – 12,000 RPM each), units tilt 0° - 90°.

•Corner rounding units from trimming leading & trailing upper and lower edge/corners when edgebanding all (4) sides or when edgebanding “soft- or postformed” panels (4 motors 0.7 HP – 12,000 RPM each).

•Top & bottom scrapers for up to 5MM thick PVC banding, pneumatic pressure control for scraping knives, digital readouts, overhead PVC filter unit eliminates PVC chips being sucked in by dust collector.

•Top & bottom PVC edge color & surface reactivation unit, LEISTER hot air blower with temperature adjustment

•Function & line control with microprocessor

•Microprocessor displays stored data, on/off workstation sequence & trouble shooting diagnostic; data input by alphanumeric keyboard; microprocessor adjusts according to stored programs or input; top pressure beam opening, pressure section position & pressure control, in/out pneumatic sideways positioning of “trim/scrap/corner round” workstations, on/off sequence of workstation motors

•Equipped with automatic strip & coil feed magazine with 3 mm PVC guillotine

•0.7 Kg capacity overhead granular glue “Quick Melt” hopper feeding compact size, Teflon coated lower applicator glue pot, 25 mm diameter glue applicator roller, reversible rotation by flip of switch

•Pressure section with (1) large diameter (200 mm) clutch controlled drive roller and (4) jump action, pneumatic pressure idle rollers, horizontal Adjustment w/digital indicator

•Hardened steel link feed chain with “anti-slip” 80 mm wide rubber pads

•(2) feed speeds, with 2.2 Kw or 3.3 Kw drive

•Motorized adjustment of top pressure beam. Heated infeed fence, automatic panel spacing control, remote control job button, insulated sound enclosure over all trim stations; rotating operator control panel at eye-level height, 15 KVA – 240 Hz frequency inverter & complete set of used tooling

Machine specifications are based on original manufacturer’s information as reported in the original manual of this machine and are subject to verification.
Prejsť navrch