relevantné návrhy strojov MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

Surplex - zadať ponuku je celkom jednoduché!
Zaregistrovať sa
Vybrať aukciu
zadať ponuku
Ďalšie informácie
Tri spôsoby úspešného predaja!
Zakúpenie
Aukcia
Marketing
Ďalšie informácie

MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center

Táto položka je na vašom Zoznam sledovania
MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
MIKRON - AGIECHARMILLES HSM 400 U 5 AXIS MACHINING CENTER
PREDANÉ
   

Ľutujeme, tento stroj sme už predali

Prezrite si podobné dostupné stroje

Náklady a služby

aukčný poplatok   15%
DPH   *plus DPH
Podmienky doručenia   naložené do kamiónu
Náklady na demontáž a nakládku   1,600.00 € (záväzné)
Náklady na dopravu   neobsahuje
Platobné podmienky   vyplatenie plnej sumy pred vyzdvihnutím

Podrobnosť stroja

Názov   MIKRON - AgieCharmilles HSM 400 U 5 Axis Machining Center
Číslo stroja   214865
Výrobca   MIKRON - AGIECHARMILLES
Model / typ   HSM 400 U
Rok výroby   2008
Stroj je k dispozícii od   immediately
Stav stroja   neskontrolovaný
Miesto   40549 Düsseldorf, Deutschland

Technické údaje

Približné rozmery   2800 x 2000 x 2700 mm
Približná hmotnosť   5500 kg

Popis

Serial No. 107.87.00.204, with rotable tilting table, EROWA ROBOT COMPACT for 60 EROWA pallet spaces. The machine is constructed in portal design and a massive polymer construction guaranteed the introduction of occuring inertia and machining force into the machine frame. This guaranteed highest accuracy of the traverse distance. The moving parts are loaded on linear compact roller guides, which guaranteed a long service life and adhesion motion control as well as for difficult cutting performance. The machine table is performed as large construction. The HSM series is generated for high speed shaping.

Technical details:
- Travel X-axis 400 mm, Y-axis 240 mm, Z-axis 350 mm, B-axis + -110 degrees. C-axis N x 360 degrees
- max. accelerating force X/Y: 10,75/8,35 kN; Z: 4 kN
- rapid traverse rate X/Y/Z: 80 m/min
- spindle speed range 100 - 42.000 rpm
- spindle holder HSK - E 40
- spindle power at 40 % ED 13 kW, spindle power at 100 % ED 10 kW
- turning moment at 60 % ED 4,25, turning moment at 100 % ED 3,2 Nm
- tool changer for 68 tool holder
- chip to chip time VDI 2852 12,5 sek
- tool changer time (TC 36 / 68) 10,0 sek

Equipment:
- ARO paper belt filter system P 750 / 1000 100 l/min with diverse paper reels
- Haidenhain iTNC 530 2P CNC control for 5-axis processing
- EROWA ITS 148 swivel table changer system
- EROWA pallet changing system for 60 pallet spaces (no pallet table is incluced in delivery)
- infrared edge finder, type 4411 32.00
- BURN filtration plant WK 5806 - C 25
- documentation in german language
- chip conveyor
- diverse spare parts in plastic boxes

Dimensions:
- EROWA pallet changer system approx. 1500 kg, 1020 x 2150 x 2700 mm
- chip conveyor approx. 800 kg, 2700 x 800 x 1500 mm
- paper belt filter system approx. 400 kg, 1850 x 1000 x 1350 mm
- filter system approx. 300 kg, 670 x 850 x 1400 mm
- 1 pallet accessories approx. 100 kg, 2100 x 1000 x 400 mm

For further details please have a look at the attached copy of operating instructions and the attached videos. A video was shot in sellers Company, the other one was created after the dismantling.
The machine was taken on 07.15.2015 stock place into operation. The machine control (HEIDENHAIN iTNC 530) examined, tested axis functions in jog mode. The main spindle has not been used to prevent damage (spindle cooling unit without coolant emulsion) in operation. A manual / mechanical inspection of the spindle had apparently no errors. There was no noise, yet determined mechanical / electrical damage in the axle. The technician confirmed that the machine is in a very good condition. On request we will send you a copy of the installation report. Finally the machine was professional pepared for the transport.
Prejsť navrch