Technológia 3D tlače PRODWAYS PROMAKER P1000X

Technológia 3D tlače PRODWAYS PROMAKER P1000X
Top položka
č. šarže 37
Ukončenie aukcie: 06-03-24 11:36
45,000 € Vyvolávacia cena
7 sledujúci
Pre prihodenie sa prihláste
Nastaviť dražobného agenta
+ aukčný poplatok a DPH
Technológia 3D tlače PRODWAYS PROMAKER P1000X
06-03-24 11:36
Ukončenie aukcie
45,000 €
Vyvolávacia cena
Názov
Technológia 3D tlače PRODWAYS PROMAKER P1000X
Číslo výrobku
909875
Výrobca
PRODWAYS
Model / typ
PROMAKER P1000X
Dokumenty
1400-002-1.7_PO - ProMaker P1000X - User Manual_PT.pdf ProTool MX2 Mixing Aparatus-Prodways.pdf 3DWays-P1000XSN65-SR-2021-03-05-BLB.pdf 3DPrinter ProMaker P1000X.pdf A6ML01~1.PDF INSTAL~1.PDF 3DWays-P1000XSN65-SR-2022-03-30-BLB.pdf Laser Sintering Material Range.pdf Parts design and orientation V3.pdf Machine Specifications Sheet.pdf Prodways - P Series Accessories.pdf ProMaker-P1000-Series-EN-V08.10.2019-x.pdf
Video
Video 1
Rok výroby
2020
Položka je k dispozícii od
Immediately
Stav položky
prevádzkyschopný
Miesto
Portugalsko, 2740-120 PORTO SALVO
aukčný poplatok
18 %
Náklady na demontáž a nakládku (záväzné)
650.00 €
Celková cena
plus DPH
Náklady na dopravu
neobsahuje
Podmienky doručenia
FCA PORTO SALVO, naložené do kamiónu
Platobné podmienky
vyplatenie plnej sumy pred vyzdvihnutím
Dražobná zábezpeka
Aukcia si vyžaduje kreditnú kartu
približné rozmery zostavy (d x š x v)
4,000 x 4,000 x 2,000 mm
Približná hmotnosť
1,650 kg

3D Printer ProMaker P1000X - 3D Printer by powder Laser Sintering
Serial Number: 001-0010-SNO0065

Mixer for Plastic Powder
Protool MXO2, Mixing Apparatus
Serial Number : 001-5200SN40
Year of fabrication: 2020

MACHINE SPECIFICATIONS
Power supply: 210-240 VAC 50/60 Hz – Single phase
Total power: 6.5 – 7.7 KVA
Power consumption: 3 KWh
Maximum current: 32 A
Machine electrical line: Dedicated
Line circuit-breaker: 32A C curve
Overall dimensions (W/D/H): 1545 x 1055 x 2125 mm
Total weight: 700 kg
Room temperature: 18°C to 28°C (23±3°C recommended)
Air extraction: > 3 air changes per hour
Room relative humidity: 40-50%.
Ceiling clearance: 0.6 m
Left-side clearance: 0.6 m
Rear clearance: 0.6 m
Right-side clearance: 1 m
-
Build chamber size (LxWxH): 300 x 300 x 360 mm
Build rate @0.1mm layer thickness* (* Depending on material, geometry and nesting density): liters/hour
Scanning speed: 8 m/s
Focusing system: F-Theta Lens
Laser power and type: 60W CO2 - 450 μm spot size
Layer thickness* (* Depending on material, geometry and nesting density): 60/100/120 μm
Powder feed type: Bi-directional, hot feed cylinders system. Counter-rotating roller recoater (optional: blade)
Max chamber temperature: 200 °C
Thermal field control: 24 x 24 points grid system
Heating system: 10 independent IR heaters
Camera system: Integrated video camera
Software features: In-machine, ‘on the fly’ slicer, compatible with STL and 3MF file formats.
Available materials**(** the Process Developer License allows to test and run even more materials): PA12, PA11 natural and glass filled, TPU, PP, Stark 3200
Printer size (LxWxH): 1800 x 1000 x 1920 mm
Nitrogen supply: External or integrated high purity nitrogen generators
Weight: 750 Kg
-
Power requirements: 210 – 240 VAC, 32A, 50/60 Hz
Voltage: 220 VAC / Single Phase
Voltage range: 210 - 240 VAC
Frequency: 50/60Hz
Total power: 6.5 – 7.7 KVA
Maximum current: 32A
Power consumption: 3KWh
Nitrogen purity:99.5 to 99.9% (no oxygen content).
Nitrogen pressure: from 2 bar / 29 PSI to 8.5 bar / 120 PSI.
Nitrogen temperature: ±3.5°C from the room temperature.
Minimum nitrogen flow capability: 15 L/min.
Overall Width: 1545mm
Overall Depth: 1055mm
Height: 2125mm

Software CAM & MACHINE CONTROL Included
• Slicer and Software
• Lifetime licence
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
ACCESSORIES SPECIFICATIONS

Manual forklift PS-MFO-P:
• The manual forklift PS-MFO-P has a maximum payload of 100 Kg
• It is equipped with a platform of 600 x 600 mm.
• Stainless steel structure
• 100kg maximum capacity
• Min-Max lift height: 87/1750mm
• 4 streering wheels for easy maneuver even if narrow spaces
• Wheel breaks (rear)
• Dimensions (W x D x H): 755 x 985 x 2150 mm
• Weight: 56kg

Breakout station ProTool BS01
• Power supply: 380 VAC
• Frequency : 50/ 60 Hz
• Nominal power: 220 W (PS-BS) / 100W (BS01)
• Rated power: 100W
• Ceiling clearance: 1m
• Front clearance: 1.5m
• Air extraction outlet: 100 mm
• Weight: 275 Kg
• Dimensions (W x D x H): 1346 x 770.25 x 1678.5 mm
• Working chamber size (W x D x H): 940 x 475 x 470 mm

Sandblasting station GUYSON - FORMULA F1400
• Serial nº: 805342
• Power supply: 230 VAC 50/60 Hz
• Nominal power: 370 W
• Compressed air pressure input: maximum 7 bar - ¼” connector
• Working chamber size (W x D x H): 815 x 560 x 591 mm
• Foot operated
• Dimensions: 1526 x 815 x 605 mm
• Weight: 70 Kg

Vacuum cleaner PS-VC or PS-VCA
• Collection type: Wet & Dry
• Voltage: 240 V @ 50 Hz
• Power: 1200 W
• Current max: 9.5amps
• Airflow max: 4500 L/min
• Container capacity: 19.5 L (wet) - 30 L (dry)
• Sound pressure level: 60 dB(A)
• Ref.: PS-VCA
• Dimensions (LxWxH): 565 x 385 x 520 mm

Powder mixing unit MX02
• Power supply: 230 V 50/60 Hz
• Nominal power: 1380 W
• Weight: 120 Kg
• Maximum payload: 50 Kg.
• Year: 2021
• Serial nº: 001 - 5200SN046
• Weight: 120 KG
• Rated Current: 7 A
• Dimensions: 850 x 810 x 1070 mm

External Nitrogen Generator P1-ENG
• Power supply: 230 VAC 50/60 Hz (EU)
• Nominal power: 30 W
• Compressed air pressure input: from 8.5 bar /120 PSI to 10 bar /145 PSI with ¼” pneumatic connector
• Compressed air flow minimum capacity: 90 Nl/min.
• Weight: 75 Kg
• Overall dimensions: 0.27 x 0.75 x 0.92 m (W/D/H)
• Clean, dry and oil-free air input: Oil content < 0.01 mg/m3

External nitrogen generator with integrated compressor P1-ENG-COMP with integrated compressor
• Power supply: 230 VAC 50/60 Hz (EU)
• Nominal power: 1.9 kW
• Protection IP20
• Weight: 220 Kg
• Overall dimensions (W/D/H): 440 x 1100 x 1302 mm

Zobraziť preklad
Automatický preklad
Názov aukcie
Metalworking Machinery Selection
č. šarže
37
Dokumenty
Zmluvné podmienky aukcie
Prehliadka
Presná poloha je k dispozícii na požiadane.
The items are in different locations (see item description)

Viewing by appointment only!
For the inspection, please contact Frederico Serradas:
frederico.serradas@surplex.com
Máte nejaké otázky týkajúce sa položky? Obráťte sa na nás.
Naše služby
  • Osobná služba v 16 jazykoch
  • Odborné konzultácie priamo na mieste
  • Zorganizovanie prepravy na požiadanie
  • Podpora pri vybavovaní dokladov a colnom konaní