KNUTH Rapimill 700 HS Vertical machining centre

KNUTH Rapimill 700 HS Vertical machining centre
Najboljša izbira
serijska št. 1
Konča se čez 1d 0h 04.12.2024 09:00
5,251 € Trenutna najvišja ponudba
21 ponudbe 71 opazovalcev
Za oddajo ponudbe se prijavite
Nastavitev dražbenega agenta
+ dražbena provizija in DDV
KNUTH Rapimill 700 HS Vertical machining centre
Konča se čez 1d 0h
Čas zaključka
5,251 €
Trenutna najvišja ponudba
Ime
KNUTH Rapimill 700 HS Vertical machining centre
Številka izdelka
969940
Proizvajalec
KNUTH
Model / Vrsta
Rapimill 700 HS
Videoposnetki
Video 1
Leto izdelave
ni znano
Izdelek na voljo od
immediately
Kakovost izdelka
Lokacija
Nemčija, 79677 Schönau
provizija dražbe
19 %
Cena demontiranja in nalaganja (binding)
500.00 €
Končna cena
plus DDV
Cena prevoza
ne vsebuje
Pogoji dostave
FCA Schönau, naloženo na dostavno vozilo
Pogoji plačila
100% plačilo pred prevzemom
Približna teža
2,900 kg
približne mere postavitve (d x š x v)
2,100 x 2,100 x 2,400 mm
Machine number: 158590
Year of construction: unknown
Machine was purchased in 2014 as a demonstration machine
Control system: FANUC SERIES 0i-MB
Incl. machine vice (jaw width: approx. 105 mm), a three-jaw chuck (diameter: approx. 125 mm) and an indexable three-jaw chuck (diameter: approx. 140 mm) (dividing head)
Technical data:
Operating hours approx. 4111, see picture
Table dimensions: 770 x 300 mm
T-slots: 16 x 3 x 80 mm
Max. Table load: 120 kg
Travel distances:
X/Y/Z: 450/350/400 mm
Distance from spindle nose to table surface: from 120 - approx. 520 mm
Feed rate:
Rapid traverse X/Y/Z: 30/30/30 m/min
Cutting feed X/Y/Z: 10 m/min
Spindle speed: 15000 rpm
Spindle holder: BT 30
Max. Tool diameter: 60 mm
Max. Tool length: 100 mm
Max. Tool weight: 2 kg
For further technical data see photographed data sheet
With technical documentation as shown in the pictures
Notes: The tool holders installed in the turret are not included in the scope of delivery
The operating hours can still increase slightly.
The operating hours may still increase slightly. Prikaz prevoda
Samodejni prevod
Ime dražbe
Closure of a CNC Production Facility
serijska št.
1
Dokumenti
Posebni pogoji dražbe
Pregled
Torek, 03.12.2024, od 08:00 Ura do 12:00 Ura
79677 Schoenau in the Blackforest, Germany

- address on request -
Viewing by prior appointment only!
Prevzem
Ponedeljek, 16.12.2024 do
Ponedeljek, 16.12.2024, od 12:00 Ura do 17:00 Ura

Torek, 17.12.2024 do
Torek, 17.12.2024, od 07:00 Ura do 16:00 Ura


Naše storitve
  • Osebne storitve v 16 jezikih
  • Svetovanje na lokaciji in s strani strokovnjakov
  • Po potrebi organizacija prevoza
  • Pomoč pri urejanju papirjev in carine