Dražba Machines and Inventory for Metalworking
MAHR MarSurf Conturograph
Hot Lot
serijska št. 19
Dražba je končana.
Dražba je končana
Odkrijte podobne izdelke, ki so na voljo.
Podrobnosti stroja
- Ime
- MAHR MarSurf Conturograph
- Številka izdelka
- 945935
- Proizvajalec
- MAHR
- Model / Vrsta
- MarSurf
- Leto izdelave
- 2007
- Izdelek na voljo od
- immediately
- Kakovost izdelka
- Lokacija
-
Nemčija, 72189 Vöhringen
- Prikaži na zemljevidu
- Vsi izdelki na tej lokaciji
Cena in ugodnosti
- 500.00 €
- Cena prevoza
- ne vsebuje
- Pogoji dostave
- FCA Vöhringen, naloženo na dostavno vozilo
- Pogoji plačila
- 100% plačilo pred prevzemom
Tehnične podrobnosti
- približne mere postavitve (d x š x v)
- 1,600 x 800 x 1,200 mm
- Približna teža
- 200 kg
Opis izdelka
- Measuring station MarSurf XC 2
- including midrange standard control,
- XC 2 software, Mahr License Key
- MarWin PC
- Monitor TFT 24
- Manual control panel MCP 23
- Feed unit CD 120
- Measuring stand ST-500
- with HG plate 700 mm x 550 mm
- Fixture PCV / CD 120
- XY table CT 120
- Rotary adjustment for CT 120
- Calibration set contour standard
- Parallel vice PPS
- Hard stone panel 700 mm x 550 mm (L x W) with three
- 10 mm wide T-slots
- Measuring column with electrically adjustable height adjustment range
- of 500 mm* for the feed unit
- Easy to change holders
- The measuring stand contains a manual mechanical
- angle adjustment for the feed unit
- ST750 = 750 mm
- Scanning range (in X) 0.2 mm to 120 mm
- Measuring range (in Z) 50 mm with 350 mm probe arm
- 25 mm with 175 mm probe arm
- Measuring system (in X) High-precision incremental measuring system
- (factory calibration with laser interferometer)
- Measuring system (in Z) Inductive transducer with high accuracy and linearity
- linearity
- Resolution (in Z) in relation to probe tip 0.38 μm with 350 mm probe arm
- probe arm
- 0.19 μm with 175 mm probe arm
- Resolution (in Z) in relation to the measuring system 0.04 μm
- Guide deviation 1 μm (over 120 mm)
- Measuring direction (in X) forwards (+X), backwards (-X)
- Probing direction (in Z) downwards (-Z), upwards (+Z)
- Measuring force (in Z) 1 mN to 120 mN, downwards and upwards
- (adjustable in MarSurf XC 2)
- Scanning angle on smooth surfaces depending on deflection:
- falling edges up to 88°, rising edges up to 77°
- Measuring speed (in X) 0.2 mm / s to 4 mm / s
- Probing speed (in Z) 0.1 mm / s to 1 mm / s
- Positioning speed (in X)
- and return speed 0.2 mm / s to 8 mm / s
- Positioning speed (in Z) 0.2 mm / s to 10 mm / s
- Probe arm length 175 mm, 350 mm
- Probe tip radius 25 μm
Samodejni prevod
Podrobnosti dražbe
- Ime dražbe
- Machines and Inventory for Metalworking
- serijska št.
- 19
- Dokumenti
- Posebni pogoji dražbe
- Pregled
-
Točen naslov vam sporočimo glede na zanimanje.
No fixed date.
Viewing by appointment only! Please contact us in advance at lqu@surplex.com for an inspection appointment.
- Prevzem
-
Ponedeljek, 30.09.2024 do
Četrtek, 03.10.2024, od 08:00 Ura do 16:00 Ura
Naše storitve
- Osebne storitve v 16 jezikih
- Svetovanje na lokaciji in s strani strokovnjakov
- Po potrebi organizacija prevoza
- Pomoč pri urejanju papirjev in carine