CITIZEN CINCOM K16 VI .

- Serial number: K01062
- Rated current: 23 A
- Connection: 8 kVA
- Frequency: 50/60 Hz
- Control: FANUC
- maximum machining diameter: 16 mm
- maximum machining length: 200 mm
- maximum removal length of the product: 80 mm
- maximum diameter of front hole: 10 mm
- maximum diameter of the front tap (tap / die): M8 / M6
- diameter of the spindle recess hole: 20 mm
- Spindle speed: max. 15000 min-1
- Gradual change of spindle speed: Stepless (S5 positions)
- Spindle indexing: 15 degrees
- Spindle C axis: 0.001 degree
- maximum spindle diameter of back spindle: 16 mm
- maximum outer workpiece length of back spindle: 40 mm
- maximum drilling diameter during backworking: 6 mm
- maximum thread diameter during backworking: M5
- Back spindle speed: max. 10000 min-1
- Back spindle speed change steps: stepless S5 digit
- Back spindle indexing: 15 degree or 1 degree
- Back spindle c-axis: 0.001 degree
- rotating tool spindle for cross machining: maximum drilling diameter: 5 mm
- maximum diameter for tapping: M4
- spindle speed: max. 6000 min-1
- spindle speed change steps: stepless S4
- Number of toll stations that can be mounted: 17
- Rotation of the toll points at the toll station: 5
- Rotation tolls for transverse machining: 4
- Front drilling tool: 4
- Rear drilling tool: 4
- Tool size: 12 x 12 x 100 mm
- Fast feed rate: X1 axis: 34 m/min, Y1 axis: 34 m/min , Z1 axis: 32 m/min , Z2 axis: 32 m/min
- Minimum input steps: X1 axis: 0.001 mm, Y22 axis: 0.001 mm, Z1 axis: 0.001 mm , Z2 axis: 0.001 mm
- Axis stroke: X1 axis: 122 mm, Y1 axis: 122 mm, Z1 axis: 200 mm, Z2 axis: 200 mm
- Bar length: 2500 mm
- Motor spindle drive: 2.2/3.7 kW
- Guidance of bus devices: 1,5/2,2 kW
- Counter spindle drive: 0.55/1.1 kW
- tool spindle drive for transverse machining: 0.4 kW
- rotating tool spindle drive for front machining: 0.4 kW
- rotating tool spindle drive for back machining: 0.4 kW
- motor: X1 axis: 0.75 kW, Y1 axis: 0.75 kW, Z1 axis: 1 kW, X2 axis: 0.75 kW, Z2 axis: 0.75 kW
- Spindle chuck: 0.2 kW
- Coolant: 0.25 kW
- Spindle cooling: 0.075 kW
- Lubricant: 0.003 kW
- Input power: 8 kVA
- Capacity of the coolant tank: 130 l
- the machine is equipped with a bar feeder of the manufacturer FMB type: MINIMAG 18 Prikaži prijevod