LEAS SCN 1500x900 Continuous CN welding machine
Detaliile utilajului
- Nume
- LEAS SCN 1500x900 Continuous CN welding machine
- Numărul articolului
- 866434
- Producător
- LEAS
- Modelul/ Tipul
- SCN 1500x900
- Anul de fabricație
- 2007
- Articole disponibile de la
- immediately
- Condiția articolului
- Locație
-
Italia, 61020 Montecalvo in Foglia
- Afișare pe hartă
- Toate articolele acestei locații
Costuri și beneficii
- 1,200.00 €
- Costuri de transport
- nu sunt incluse
- Termeni de livrare
- FCA Montecalvo in Foglia, încărcat în camion
- Termeni de plată
- 100% din plată înainte de colectare
Detalii tehnice
- măsura aprox. de oprire (l x w x h)
- 8,200 x 3,800 x 2,400 mm
- greutate aprox.
- 6,700 kg
Descrierea articolului
Wheel welding machine in a water bath, perfect for welding tubs to steel worktops.
It uses the same technology as a spot welder, but applied continuously via a wheel, which allows for continuous, stagnant welding between sheets. The water jet allows the steel not to heat up and not deform. Also equipped with two additional water collection tanks suitable for surfaces up to 5 meters long.
Its working range is 1500 x 900mm, welding speed from 3 to 7 m/min depending on the thicknesses to be welded.
No programming software is needed as everything is done from the machine. The production cycle on the machine consists of a first spot welding phase to lock the tank to the surface, followed by the actual welding, a single cycle without tool changing.
Machine not used since 2018, used for about a hundred hours, practically still new, only the NC battery needs to be replaced and the back up reloaded.
There are some sink templates available that can be supplied.
LEAS technology video https://www.youtube.com/watch?v=W6MOL80-UPs
It uses the same technology as a spot welder, but applied continuously via a wheel, which allows for continuous, stagnant welding between sheets. The water jet allows the steel not to heat up and not deform. Also equipped with two additional water collection tanks suitable for surfaces up to 5 meters long.
Its working range is 1500 x 900mm, welding speed from 3 to 7 m/min depending on the thicknesses to be welded.
No programming software is needed as everything is done from the machine. The production cycle on the machine consists of a first spot welding phase to lock the tank to the surface, followed by the actual welding, a single cycle without tool changing.
Machine not used since 2018, used for about a hundred hours, practically still new, only the NC battery needs to be replaced and the back up reloaded.
There are some sink templates available that can be supplied.
LEAS technology video https://www.youtube.com/watch?v=W6MOL80-UPs
Traducere automată
Vânzare directă
7 urmăritori
7
Observator
la cerere
Preț
Serviciile noastre
- Service de demontare & remontare
- Rețea logistică la nivel mondial
- Consiliere individuală
- Asistență la întocmirea documentației și la vămuire