ANAYAK FBZ-HV-2500 TEXT

Serial number: FBZ-8882
Operating voltage: 380 V
Frequency: 50 Hz
Rated current: 60 A
Connection: 40 kW
Control: HEIDENHAIN TNC 407
Tool holder: SK 50
Travel distances:
X: 2500 mm
Y: 800 mm
Z: 815 mm
Table clamping surface: 2900 x 800 mm
Distance from floor to top edge of table: 950 mm
Table surface with 5 T-sLot width/spacing: 22H12/150 mm
Center groove: 22H7
SPECIAL FEATURE: max. table load without weight limit!!!
Distance spindle nose - table surface min./max.: 0 - 817 mm
Distance spindle center - table start: 235 mm
Distance spindle center - table end: 935 mm
Universal head position: 90°
Distance spindle center - table surface: min. 200 mm, max. 1100 mm
Horizontal position: 0°
Distance spindle center/table surface min./max.: 0 - 900 mm
Distance spindle nose/start of table: 150 mm
Distance spindle nose/table end: 820 mm
Horizontal position: 180°
Distance spindle center/table surface: min. 400, max. 1300 mm
Feed for X-, Y- and Z-axis stepless: 10 - 3000 mm/min
Rapid traverse movement X-, Y- and Z-axis with tool holder SK 50 or BT 50: 10000 mm/min
Diameter of ball screws Y- and Z-axis: 50 mm
Diameter of ball screw drives X-axis: 63 mm
Main drive:
Spindle speeds infinitely variable: 60 - 2000 rpm
Measuring system:
Measurement X- and Y-axis: direct linear measuring system
Z-axis measurement: indirect rotary encoder
Resolution: 0.002 mm
The machine is equipped with a hydraulic unit from the manufacturer HYDRAULIKRING
Attention: the machine can be transported on a truck up to 3000 mm wide and 3000 mm high
Special design features: induction-hardened flat guides lengthwise, vertically and crosswise, plastic-coated counter guides lengthwise, vertically and crosswise, sufficiently dimensioned and ribbed machine bed
The machine is designed as a monoblock system and is therefore very compact and stable
3 to 5-sided machining possible
Automatic central lubrication with electrical monitoring
Hydromechanical quick tool clamping Visa översättning