BRANDT KDF 540 2C Single Sided Kanlistmaskins

Type of edging Thin edge Thick edge Solid wood
Gluing System EVA Hotmelt
Corner Rounding Unit yes
Max feed speed 11 m/min
Maximum panel thickness 55 mm
Operating Units 7 nr
Min. panel height 8 mm
Max. panel height 50 mm
Min. edge thickness 0.4 mm
Max. edge thickness 8 mm
Max. forward feed speed 11 m/min
Top pressure yes
Pressure with idle wheels
Panel support guides yes
No. Panel Sizing / Milling units 1
NO. PANEL SIZING / MILLING UNITS 1
Unit : pre-milling unit
automatic timed intervention : yes
motor power : 2.2 KW
Edge coil magazine yes
no. positions 1
Gluing system yes
glue pot for EVA hot melt glue yes
Roller set to press the edge yes
No. Edge Processing Units 5
NO. EDGE PROCESSING UNITS 1
Processing Unit : end trimming
Constructor model : HL 6130
no. motors : 2
motor power : 0.18 KW
r.p.m. : 12000 RPM
NO. EDGE PROCESSING UNITS 2
Processing Unit : fine trimming to trim and round
Constructor model : BF 6240
no. motors : 2
with positioning by NC : yes
NO. EDGE PROCESSING UNITS 3
Processing Unit : fine trimming to trim and round
Constructor model : BF 6245
no. motors : 2
with positioning by NC : yes
NO. EDGE PROCESSING UNITS 4
Processing Unit : Corner rounding
Constructor model : FF 6210
no. motors : 1
motor power : 0.35 KW
r.p.m. : 12000 RPM
NO. EDGE PROCESSING UNITS 5
Processing Unit : buffing
Constructor model : FP 6810
no. motors : 2
motor power : 0.18 KW
Machine programming software Power Control PC 16
Safety standard CE mark yes
Total installed power 13.4 KW Visa översättning