- Tъргове
- Direct Sales
- Всички категории
- Метал
- Дърво
- Строителство
- Продажба
Помощ
Видео 1 |
SCHNEEBERGER SIRIUS - PPI CNC Profile Knifes
no. 20055
Measuring systems
Incremental length measuring system
ltem : Resolution
X,Y and Z-axes: 3 µm
A-axis: 1.0
B-axis: 1.3"
Grinding head, grinding spindle
Fixed motor spindle horizontal
Driving power: 9.0 kW
Spindle revolution: 0...10'000 1/min
Spindle adapter: HSK 80
Wheel diameter: up to 300 mm
Number of wheels: up to 6
Linear-axes
X-axis
Travel: 650 mm
Max. speed: 15'000 mm/min
Resolution: 0,0001 mm
Driving power: 1.0 KW, 6 Nm
Y-axis
Travel: 300mm
Max. speed: 8“000 mm/min
Resolution: 0,0001 mm
Driving power: 1.0 KW, 8 Nmº
Z-axis
Travel: 300mm
Max. speed: 15'000 mm/min
Resolution: 0,0001 mm
Driving power: 1.0 KW, 6 Nm
B-axis
Angle of inclination: ± 90º
Max. speed: 108/s
Resolution: 0,0004 mm
Driving power: 1.0 kW, 6 Nm
A-axis
Angle of inclination: ± 115º
Max. speed: 167º/s
Resolution: 0,0003
Driving power: 0,5 kW, 2 Nm
Cone: 15040
Centre height: 155 mm
Machine table
With three T-rabbets (14 mm)
Diameter: 300 mm
Electric connected load
Power rating: 56 kVA
Tension: 3 x 400 V AC
Frequency: 50Hz
Main fuse: 80 AT
Acoustic level
The acoustic level is below 70dB(A)
The measuring was performed in accordance with the standard DIN 45 635.
Control
GE FANUC
Type: 160 i with integrated PMC
Axes: 5 or 6 axes simultaneously controllable
Fanuc PC: Machine PC with integrated keyboard and touch-screen monitor
CNC: Computer Numerical Control
FU I/O: Frequency converter interface for spindle-motor
P In: Probe interface
PMC: Programmable Memory Control
I/O: Input / Output module
CB I/O: Fanuc command button interface
I+H In: Hand wheel interface
X 404 Out: Peripheral output interface for contactors and valves
U 500: Potential operation between computer and periphery
X 402 Ih: Peripheral input interface for initiators and pressure gauges
For detailed information on the control, see Fanuc manuals (delivered with the machine).
Machine computer
Manufacturer: GE FANUC
Type: 160i
Screen: LCD touch-screen
Keyboard: Full Keyboard (American layout)
Work memory: 32 MB Ram
Harddisk: 3.5 GB
Disc drive: 3.5 Inch 1.44 MB
Serial interface: RS 232
Parallel interface: RS 442
Operating system: Microsoft Windows NT 4.0
Computer Numeric Control (CNC)
Manufacturer: GE FANUC
Type: 160i
Axes: 5- or 6-axes simultaneously controllable Fanuc CNC
Operating system: FANUC CNC
Serial interface: Internal as bus
Spindle interface: Analogue nominal / actual value control
Probe interface: Interrupt active input
Parameterizing with: Fanuc Basic Operation Package (BOP)
For information on using, programming and maintaining, see Fanuc manual.
Programmable memory control (PMC)
Manufacturer: Fanuc GE
Type: Ladder
Analog inputs: 2
Analog outputs: 2
Digital inputs: 42 switched
Digital outputs: 42 switched
Parameterizing with: Fanuc Basic Operation Package (BOP)
Spindle control
Frequency converter for three-phase alternator motor.
Software operating instructions
The Schneeberger 5-axis tool grinding machines are equipped with the following programs:
1. Operating system Windows NT 4.0
The operating systems Microsoft Standard version.
lt can be installed in the languages German, English, French, Italian or Spanish according to the customer's domain.
An installation version of the operating system is delivered with the machine.
The Windows support is in the menu , Start”.
2. Application software Quinto NT
Depending on the applications, Quinto NT, Quinto Insert or both of them can be used.
The corresponding language can be selected by the user.
If the language in Quinto is changed, the language in the operating system Windows does not change automatically.
The software can only be executed on a machine or on an office PC with a hardlock.
A copy of Quinto's installation version is in the machine's directory ,CMnstall.nt”.
3. Fanuc Basic Operations Package BOP
Kinematics: Definition of the moving direction from the machine axes (see PDF)
Machine dimension
Width 1660 mm
Depth 2400 mm
Height 2260 mm
Weight 8.500 kg
1660 x 2400 x 2260