Použité stroje Surplex
Prodej Surplex Trust

Aukce 'KUPER Stock Machines (Part 4)': č. série 3 BRANDT KDF 660 C Olepovačka hran
Německo, 33397 Rietberg

Ukončení aukce
za 28 den(dny) 14 hod.
20.10.2020, 10:00
Aktuální nejvyšší nabídka
0
Prohlíží 15 uživatelé
Přihlaste se prosím
8,000
Vyvolávací cena
Podejte nabídku
Ukončení aukce
za 28 den(dny) 14 hod.
20.10.2020, 10:00
Aktuální nejvyšší nabídka
0
Prohlíží 15 uživatelé

Podrobnosti

Kalkulace celkové ceny
Tisk
Máte nějaké otázky týkající se stroji? Prosím kontaktujte nás.
Název: BRANDT KDF 660 C Olepovačka hran
Č. stroje: 564533
Výrobce: BRANDT
Model / typ: KDF 660 C
Doporučení:
Top položka
Zboží s osobním doporučením
Rok výroby: 2005
Stroj je k dispozici od: immediately
Stav stroje:
Lokalita: Show on map Německo, 33397 Rietberg
Show on map
Edge banding machine KDF 660

Single sided edge banding machine in right hand
guide for hot-melt gluing.

Quick-change gluing unit for hot-melt glue.
Processing of PU-glue granulate under
Observe the adhesive processing instructions
possible.

Glue supply leak-proof under the glue roll.

Fine dosage of glue to the workpiece
by means of glue roll, no adjustment to factory
piece thickness required.

Glue roll direction of rotation either constant or
Reverse course. Glue temperature monitoring by means of
electronic thermostat.
Automatic glue temperature reduction at
Work stoppages.
Infrared hot melt activation.

Automatic edge magazine for roll goods and
Fixed lengths, incl. roller plate diameter 800 mm.

Equipment with reinforced pre-cutting shears for
Thick PVC/ABS max. 3 x 45 mm.

Standard equipment with edge- and work-
piece distance monitoring by means of optical
Display.

Heavy pressure zone with driven, pneumatic
table loaded main pressure roller and
3 free-running holding rollers.

Standard equipment with automatic
Central lubrication for the transport chain.

Central adjustable upper pressure.

Control panel at machine infeed.

Electronic control PC 16
-------------------------
BRANDT control system with color graphics-
User interface for easy and intuitive
comfortable operation and programming.

Technical details:
- Swivelling control panel at the machine infeed
- Durable short-stroke membrane keyboard
- Colour graphics flat screen
- Industrial PC with compact flash disk as
  Mass storage
- Genset function keys with LED status display
- Support of the operator guidance by colour-
  Pictograms
- Online language switching between various
  Foreign languages
- Representation of the essential machine setpoints
  and actual conditions
- Status messages in plain text
- Easy selection and correction of the route points
- Simple possibility of axis adjustment (with
  corresponding aggregate design)
- Online help in plain text by any time
  accessible help window
- Production data acquisition for production time
  edge length and number of workpieces, as daily
  and total value
- Inspection and maintenance interval display
- Remote service possibility through integrated
  Modem and installed service software
- Saving of machining programs
- Production according to machining programs
- Data backup of machining programs
  on diskette

Electrical equipment with modular
Control system for increased operator comfort.

Modem for remote service and remote maintenance of
machine via the public telephone network.
For this purpose, an analog
Telephone connection required on the machine.

Noise protection cladding including central
suction connection diam. 120 mm and chip trap
box for scraper shavings with suction socket
Diameter 100 mm. For machines with a
Joining milling unit (KDF machines) additional
Suction connection Diameter 120 mm.

Permissible ambient temperature min. +5 degrees/
max. +35 degrees Celsius, for electrical and
mechanical functioning of the machine.
The processing guidelines of the glue and
Edge manufacturers must be observed.

For mains voltage fluctuations greater than +/- 10
a voltage stabilizer must be installed at the place of use
can be installed.

Machine deliveries for EU countries safety-
technically executed in accordance with EC directive
98/37/EC, Annex I.

Technical data
edge thickness 0.4 - 12 mm
           Roll separation max. 3 x 45 mm
                         or 0.8 x 65 mm
workpiece thickness 8 - 60 mm
Feed rate max. (*) approx. 14 m/min
(*) When selecting the form milling machine
      automatic switchover to 11 m/min.
electrical 400 V - 3 Ph. - 50 Hz
Pneumatic connection min. 6 bar
Connected load approx. 12 kW

QUICKMELT - GLUED PART
Pre-registrator and quick change-
bar, small volume gluing unit instead
of the standard gluing unit.

JOINT MILLING UNIT 2 X 2,2 KW 200 HZ FG 3500
For joining before the gluing part, spindle gluing
vertical position, electro-pneumatic
Control horizontal, 2 motors (1 x equal-,
1 x counter rotation), max. chip removal / stroke 3 mm
(The maximum chipping cross section depends on
of material and feed speed)
Covering hood with suction socket diam. 120 mm.
Equipment without joining tools

SET OF JOINTING CUTTERS 48 MM DIA
for use on jointing and milling unit. 2 permanently mounted
DIA joining heads diam. 100 x 48 x diam. 30 mm,
Z = 3 + 3
with double keyway 8 x 3 mm
max. workpiece thickness 42 mm

CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0,35 KW
For cutting the front and rear edge of the
projection with pulling cut for high
accuracy.
Edge dimensions: max. 12 x 40 mm
                 max. 3 x 65 mm
2 motors each 0.35 kW, 200 Hz, 12,000 rpm
swivel range straight on chamfer caps 0-15 degrees

Equipped with 2 crosscut saws diam. 100x32x2,6 mm
Z = 30
Feed speed: max. 14 m/min.
PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT
For the electro-pneumatic changeover of the crosscut
aggregates from chamfer to straight.

MILLING AGGREGATE 2 X 0,55 KW 0 - 25 DEGREES COUNTER DIRECTION
For flush milling of the upper and lower
Edge material overhang. 2 motors side-by-side.
arranged one above the other, vertically and horizontally
tentative, manually moveable 30 mm sideways.
Height adjustment of the upper motor with the
Positive pressure.
Digital counters for quick adjustment.
Spindle adjustment for lateral sensing rollers.
edge thickness max. 15 mm
workpiece thickness 8 - 60 mm
Swivel range 0 - 25 degrees
Standard equipment with
2 pcs. WPL cutters diam. 70 x 20 x 16 mm,
Z = 4.

PNEUMATIC ADJUSTMENT OF MILLING UNIT
For electro-pneumatic axial movement
of milling units on manual 4-fold
Revolver attacks.
Aggregate individual adjustment top/bottom

SHAPING MILLING UNIT TOP+BOTTOM 2 X 0,35 KW FF 6220
For form/flush milling of head edges on post-
and softforming parts and corner rounding of
Thick PVC edges. Wooden edges are possible to a limited extent,
depending on preliminary tests. Optionally radius-
or chamfer milling cutters can be mounted.

Restrictions for loose center layers on
Post-/Softforming parts and extremely thin
Melamine/foil edges and surface mate-
rialien.

2 motors each 0.35 kW, 200 Hz, 12000 1/min.
edge thickness max. 3 mm (radius)
workpiece thickness max. 55 mm
Feed speed max. 11 m/min.
Including pneumatic 2-point-
Adjustment chamfer/radius.
Delivery without milling tools

Suitable for the following milling tools:
VKNR 4873 - WPL radius cutter set
VKNR 4827 - WPL chamfer milling cutter 15 degrees (2 x)

WPL-RADIUS MILLING CUTTER SET FORM MILLING
2 WPL radius cutters
Diameter 58/50 x 12 x 16 mm, Z = 4
for radii r = 2 mm

SCRAPER WITH QUICK CHANGE HEADS ZK 6510
Scanning from above, below and sideways. To
Chamfering or rounding of pre-milled PVC edges.
Max. edge thickness 3 mm. Height adjustment of the
upper device with the upper pressure, including
2 quick-change heads for simple radius
change, with 2 WPL profile knives r = 2 mm.

PNEUMATIC ADJUSTMENT SCRAPER 5760/5736
for electro-pneumatic lateral movement
of the scraper units

1 set, 2 quick change heads for profile scraper
  additionally

BUFFING UNIT 2 MOTORS FP 6810
For getting a grip on the edges at the top and bottom.
2 motors each 0.18 kW, individually suspended,
adjustable in height and inclination.
Height adjustment of the upper motor with the
Positive pressure.
2 molleton discs diam. 150 x 20 mm
tloušťka hrany: 0,4 - 12 mm
tloušťka obrobku: 8 - 60 mm
plnění: 14 m/min
společná ořezávácí jednotka: 2 X 2,2 KW
lepící jednotka: QUICKMELT
vyřezávací jednotka: 2 X 0,35 KW
jemná ořezávácí jednotka: 2 X 0,55 KW
profilované ořezávací zařízení: 2 X 0,35 KW
profilované cidliny: yes
stroj pro broušení hran: yes
ovládání: PC 16
celkový výkon cca: 12
Přibližné rozměry: 7,000 x 1,700 x 1,900 mm
Přibližná hmotnost: 3,000 kg
Máte nějaké otázky týkající se stroji? Prosím kontaktujte nás.
Aukční poplatek 15%
DPH: plus DPH
Dodací podmínky: FCA Rietberg, naloženo na kamion
Náklady na demontáž a nakládku 400€ (binding)
Náklady na dopravu: neobsahuje
Platební podmínky: Platba v plné výši před odběrem
Datum: Pondělí, 02.11.2020 do
Čtvrtek, 05.11.2020, od 08:00 do 15:00

Pátek, 06.11.2020 do
Pátek, 06.11.2020, od 08:00 do 12:00

Pondělí, 26.10.2020 do
Čtvrtek, 29.10.2020, od 08:00 do 15:00

Pátek, 30.10.2020 do
Pátek, 30.10.2020, od 08:00 do 12:00
Surplex App - nyní také pro Android!
Zdarma ke stažení:
iPhone & iPad
Android

Naposledy zobrazené stroje

Seznamu sledovaných
Položka byla odstraněna. Vrátit