Použité stroje Surplex
Prodej Surplex Trust

Aukce 'Surplex Woodworking Auction (February I)': č. série 3 KUPER SWT XL-6 Planing and Moulding Machine

Ukončení aukce
06.02.2020, 10:02
za 14 den(dny) 5 hod.
Obnovit
Přihlaste se prosím
Sledujte
Aktuální nejvyšší nabídka:
0
nabídky: 0
Vyvolávací cena:
45,000
nabídky: 0
Podejte nabídku
Rok výroby: 2017
Stroj je k dispozici od: immediately
Stav stroje: dobrý
Lokalita: Německo, 33397 Rietberg

Podrobnosti

Kalkulace celkové ceny
Tisk
Máte nějaké otázky týkající se stroji? Prosím kontaktujte nás.
Maximilian Berger

Maximilian Berger
Telefon: +49 211422737866
Mobilní telefon: +49 1742417737
E-mail: maximilian.berger@surplex.com

Název: KUPER SWT XL-6 Planing and Moulding Machine
Č. stroje: 558240
Výrobce: KUPER
Model / typ: SWT XL-6
KUPER SWT XL-6 Planing and Moulding Machine
demonstration machine

technical data:
working width (perimeter of tools 125 mm): 15 - 250 mm
working height(perimeter of tools 125 mm): 10 - 150 mm

The processing of the work pieces is depending on the following operating parameters:
material, wood moisture, tools, diameter of the chip removal and feed speed.
If necessary adjustments to the operating parameter have to be done.

1st spindle: HORIZONTAL, BOTTOM 

Siemens IE3 Spindle motor with electronical brake:   5,5 kW (7,5 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                               275 mm
___________________________________________________________________________
drive:                                                  6.000 rpm
___________________________________________________________________________
perimeter of tools:                              125 - 160 mm
___________________________________________________________________________
reference cutter:                                diameter difference 20 - 25 mm to the cutter head
                                                    Machine can't work without reference cutter head
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
quick action lock nut:                               Pro-Lock

2nd spindle: VERTICAL, RIGHT

Siemens IE3 Spindle motor with electronical brake:   5,5 kW (7,5 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                               170 mm
___________________________________________________________________________
drive:                                                  8.000 rpm
___________________________________________________________________________
perimeter of tools:                              112 - 200 mm
___________________________________________________________________________
adjustment path axial:                        60 mm
___________________________________________________________________________
adjustable table plate to tool radius
___________________________________________________________________________
standard profile depth:                       20 mm
___________________________________________________________________________
connecting piece:                               D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut:                           Pro-Lock
___________________________________________________________________________
motorized adjustment system:              axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
electric dual display:                               radial
- settings are specified by the program


3rd spindle: VERTICAL, LEFT

Siemens IE3 Spindle motor with electronical brake:   7,5 kW (10 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              170 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
adjustment path axial:                               60 mm
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
adjustable table plate to tool radius
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                              individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut:                              Pro-Lock
___________________________________________________________________________
motorized adjustment system:                axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
motorized adjustment system:                 radial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
opposite feed rollers axial 35 mm adjustable
- to be able to optimally respond quickly to various profiles or profile widths

4th spindle: HORIZONTAL, TOP 

Siemens IE3 Spindle motor with electronical brake:   7,5 kW (10 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              260 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
adjustment range axial:                          40 mm
___________________________________________________________________________
pressure shoe:                                       pneumatically, via linear guides dynamically adjustable
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut:                               Pro-Lock
___________________________________________________________________________
motorized adjustment system:                     axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
motorized adjustment system:                         radial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
pressure shoe crosswise controlled

5th spindle: HORIZONTAL, TOP

Siemens IE3 Spindle motor with electronical brake:   7,5 kW (10 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              260 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
adjustment range axial:                              40 mm
___________________________________________________________________________
pressure lips:                                       extra-long and pneumatically adjustable    
___________________________________________________________________________
pressure shoe:                                       pneumatically, via linear guides dynamically adjustable
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut                               Pro-Lock
___________________________________________________________________________
motorized adjustment system:                         axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
motorized adjustment system:                         radial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
glassbar splitter:
- pressure shoe crosswise controlled
- splitter
- kickback protection

6th spindle: HORIZONTAL, BOTTOM

Siemens IE3 Spindle motor with electronical brake:  5,5 kW (7,5 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              260 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
quick action lock nut:                               Pro-Lock
___________________________________________________________________________
motorized adjustment system:                         axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  

FEEDSYSTEM

chainless, each roller unit has its own gearing with universal shaft to the feed rollers.
feed motor with electronical brake:                  4 kW
speed variable by frequency converter:           6 - 24 m/min.
motor (hight adjustment):                                  0,55 kW

Two driven infeed roller upstream of the first bottom spindle can be pneumatically raised and lowered via selector switch.

Short roller distance swivelling from top, in opposite to the right spindle for an easy tool change.

electrical positioning for the feed beam

ELECTRIC

400 Volt/3 PH/PE
3-pole main switch, 50 Cy, IP 54
Iinstallation according to the current standards


MACHINE BASIC STAND, TABLES AND GUIDES

heavy construction of the basic stand,
torsion free and low vibration

infeed table 2.500 mm long, hard chromium plated
                      
1 driven, double mounted roller in the infeed table and in machine end table

manual lubricant pump

PRESSURE ELEMENTS AND GUIDANCES

lateral pressure roller in the infeed table, spring mounted
lateral pressure of the roller before the left spindle, revolving and spring mounted

addtional ruler (height adjustable) behind left spindle

height of the fence in the machine 25 - 30 mm, with lengthwise adjustable lipps in the range of right spindles

left wide controlled pressure ruler

MACHINE MAINTENANCE

The main lubricating points are grouped centrally at the front of the machine.
Each guidance has a separate nipple.
Lubrication intervals are marked by colored markings.

Comfort control K2 Professional

- Siemens 9" color touch screen
- easy management of the programs
- graphical user interface
- for each program and tool drawings or photos can be stored
- additional 3.5 " screen at the front of the machine to show the present
- set - position and the need tool radius for the program  
  (per motorized spindle)
- simplified set / correction by dynamic jogging function of the
  positioning motor
- independent surface for a quick change of the four side dimensions


SECURITY

LED light inside the security cover.

machine in accordance with the valid CE standards, supplied with operating tools however without processing tools


COLOURS

RDS 2408005
RAL 7024

*** without tools ***
sériové číslo: K810-03185
šířka hoblování: 15-250 mm
výška hoblování: 10-150 mm
délka plochy stolu: 2,500 mm
počet vřeten: 6
1. vřeteno: horizontal unten 5,5kW
2. vřeteno: vertikal rechts 5,5kW
3. vřeteno: vertikal links 7,5
4. vřeteno: horizontal oben 7,5kW
5. vřeteno: horizontal oben 7,5kW
6. vřeteno: horizontal unten 5,5kW
průměr vřetena: 40 mm
plnění: 6-24 m/min
Přibližné rozměry: 6,000 x 2,000 x 2,000 mm
Přibližná hmotnost: 6,000 kg
Máte nějaké otázky týkající se stroji? Prosím kontaktujte nás.
Maximilian Berger

Maximilian Berger
Telefon: +49 211422737866
Mobilní telefon: +49 1742417737
E-mail: maximilian.berger@surplex.com

Aukční poplatek: 15%
DPH: *plus DPH
Dodací podmínky: FCA Rietberg, naloženo na kamion
Náklady na demontáž a nakládku: 1,000€ (binding)
Náklady na dopravu: neobsahuje
Platební podmínky: Platba v plné výši před odběrem
Surplex App - nyní také pro Android!
Zdarma ke stažení:
iPhone & iPad
Android

Naposledy zobrazené stroje

Seznamu sledovaných
Položka byla odstraněna. Vrátit