LEAS SCN 1500x900 Continuous CN welding machine
Detail stroje
- Název
- LEAS SCN 1500x900 Continuous CN welding machine
- Číslo zboží
- 866434
- Výrobce
- LEAS
- Model / typ
- SCN 1500x900
- Rok výroby
- 2007
- Položka je k dispozici od
- immediately
- Stav položky
- Lokalita
-
Itálie, 61020 Montecalvo in Foglia
- Zobrazit na mapě
- Všechny položky v této lokalitě
Náklady a výnosy
- 1,200.00 €
- Náklady na dopravu
- neobsahuje
- Dodací podmínky
- FCA Montecalvo in Foglia, naloženo na kamion
- Platební podmínky
- Platba v plné výši před odběrem
Technické detaily
- míra seřízení cca (D x Š x V)
- 8,200 x 3,800 x 2,400 mm
- Přibližná hmotnost
- 6,700 kg
Popis položky
Wheel welding machine in a water bath, perfect for welding tubs to steel worktops.
It uses the same technology as a spot welder, but applied continuously via a wheel, which allows for continuous, stagnant welding between sheets. The water jet allows the steel not to heat up and not deform. Also equipped with two additional water collection tanks suitable for surfaces up to 5 meters long.
Its working range is 1500 x 900mm, welding speed from 3 to 7 m/min depending on the thicknesses to be welded.
No programming software is needed as everything is done from the machine. The production cycle on the machine consists of a first spot welding phase to lock the tank to the surface, followed by the actual welding, a single cycle without tool changing.
Machine not used since 2018, used for about a hundred hours, practically still new, only the NC battery needs to be replaced and the back up reloaded.
There are some sink templates available that can be supplied.
LEAS technology video https://www.youtube.com/watch?v=W6MOL80-UPs
It uses the same technology as a spot welder, but applied continuously via a wheel, which allows for continuous, stagnant welding between sheets. The water jet allows the steel not to heat up and not deform. Also equipped with two additional water collection tanks suitable for surfaces up to 5 meters long.
Its working range is 1500 x 900mm, welding speed from 3 to 7 m/min depending on the thicknesses to be welded.
No programming software is needed as everything is done from the machine. The production cycle on the machine consists of a first spot welding phase to lock the tank to the surface, followed by the actual welding, a single cycle without tool changing.
Machine not used since 2018, used for about a hundred hours, practically still new, only the NC battery needs to be replaced and the back up reloaded.
There are some sink templates available that can be supplied.
LEAS technology video https://www.youtube.com/watch?v=W6MOL80-UPs
Automatický překlad
Přímý prodej
Prohlíží 7 uživatelé
7
Sledující
na vyžádání
Cena
Naše služby
- Demontáž a opětovná montáž Servis
- Celosvětová logistická síť
- Individuální poradenství
- Podpora při vyřizování dokumentů a celním odbavení