BÜRKLE PLUS NORDSON RCL Laminating Line

• Production line for surface treatment (roll coating machine for coating, dry and paint printing line)
• Year of construction 2018, Commissioning in May 2019.
• Connected via internet with Bürkle in Germany (can have the operating hours confirmed at any time.

                  Production plant consisting of:

• 100 - Conveyor belt track for alignment (covering and alignment of support plates)
• 120 - infrared heating zone
• 300 - RCGT-E Adhesive Applicator
• 320 - hot melt installation
• 350 - roller conveyor
• 400 - roller press
• 500 - roller conveyor
• 8000 - central control system

This machine has been configured to bond sandwich panels using a Hot Melt polyurethane adhesive, which is automatically prepared in a Nordson machine and applied through 2 injectors on the adhesive application valve.
The sizes of sandwich panels that can be made with this machine are :
- Length - max 6 m
- Width - max 1.5 m
- Thickness - between 5 mm and 240 mm
The machine was used to laminate some sandwich panels of 30 mm thickness and 45 mm thickness, consisting of 2 sides of fiberglass impregnated with polyurethane resin and P.U. core with a density of 40kg/m³.

        For detailed technical documentation, please refer to the attached PDF files