Machine Tools

Producer

Sale format

Machine condition

Location

Machine Tools

13 used machines found
Sort by
Name
Name
Location
Location
Number of bids
Number of bids
Current bid
Current bid
Closing time
Closing time
view:
 
Machines / page
HEIDENHEIN LS 30 x 4200 measuring bars
Duisburg
on request
anytime
Lot of Gear-Cutting Tools
Erfurt
8 Bids
300 €
16/12/2016;11:30
 Tools For Woodworking
Silvi Marina (TE)
0 Bids
260 €
closed
 Chipboard Cutting Tools
Silvi Marina (TE)
0 Bids
200 €
closed
HYDRO WU0005 Cassette Holder
Lucon
0 Bids
120 €
22/12/2016;14:34
Twin-Bladed Tools
Erfurt
1 Bid
100 €
16/12/2016;11:31
TECHNAL 0F001 Tool for punching square pins
Lucon
0 Bids
100 €
22/12/2016;14:28
TECHNAL 2781 Tool for opening frames GB
Lucon
0 Bids
100 €
22/12/2016;14:31
TECHNAL 2785 Tools  for opening frames GBi
Lucon
0 Bids
100 €
22/12/2016;14:32
TECHNAL 2718 Tool for drainage MC
Lucon
0 Bids
100 €
22/12/2016;14:33
2 Tool Tapers
Elgoibar
0 Bids
22 €
closed
Receive new offers in this category directly by Email.
Index

  1. Explanation of the term "tools for machines"
  2. Types of tools available for machines
  3. Composition of tools for machines
  4. Working with tools for machines
  5. Suppliers of tools for machines
Used tools for machines 01

Explanation of the term "tools for machines"

Tools for machines are those that work on cutting machines and all their associated accessories: everything that can bore, saw, mill, grind or polish. There are also special tools. There is a very large selection of tools available for machines.

Types of tools available for machines

  • Tools used for cutting machines
  • Tools for boring, milling, grinding or polishing
  • Both the cutting implement and its receptacle combined create a tool for a machine
check1 Quality  check2 Great offers  check3 Personalized
Tools for machines are primarily divided depending on what they are used for. The biggest category is milling tools. However, there is also a large variety of drilling and boring tools available. These differ from each other not only in terms of dimensions but also in their composition.

Composition of tools for machines

These tools are usually made out of two components: the actual cutting implement and its receptacle. Additionally, accessories and extensions can expand the tool. The receptacle of the tool depends on the machine. There are around 10 different basic types of receptacles or attachments. However, there is such a high level of competition between the different systems that several types have actually disappeared off the market in recent years, particularly the older SK-attachments.

STUHLMANN Tools for machines in use

Working with tools for machines

Tools made for machines are individually built for every type of milling process, which is undertaken by skilled cutting machine operators. Big companies have a separate department for work preparations. After the production of milling products, tools are taken aside and cleaned. Because there are high levels of wear and tear on milling and boring implements, they are monitored and fixed up, if needed. Hard metal tools are ground by qualified employees. These tools can be particularly sharp. Helical milling tools, used particularly for smooth surfaces, can cause cuts and injury, even when only lightly touched. Fiddling with these tools should therefore only be done with cut-resistant gloves.

Used tools for machines 02



Tools used for machines are commonly dirty due to cooling lubricants. This is particularly the case for the attachments of screw taps. Oil can enter the air when blowing on the workpiece. Therefore it is useful it wear breathing protection. Tools for machines are very expensive, and this is particularly the case for special tools, like rolling equipment. These forming tools can cost up to 10,000 euros. It is important to properly train staff so they gain awareness of how best to handle these tools.

Suppliers of tools for machines

Second hand milling and drilling tools can be used as long as there is nothing wrong with their characteristics and their wear limit has not yet been reached. Established manufactures of all kinds of hard metal tools are INGERSOLL, DIMA and HITACHI. Receptacles for tools are available from SCHUNK, HAIMER and DIEBOLD.

Used tools for machines 03
Go to top