Taladros automáticos de línea REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000

Taladros automáticos de línea REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000
Denominación
Taladros automáticos de línea REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000
Número de artículo
836511
Fabricante
REM - MAHROS - OMAL
Modelo/Tipo
OVER RS / Runner / INSERT LINEA 2000
Documentos
Layout_REM.pdf
Año de fabricación
2011
Disponibilidad
at once
Estado
Lugar
Alemania, 04895 Falkenberg
Gastos de desmontaje y carga (obligatorio)
5.900,00 €
Gastos de transporte
no incluidos
Condiciones de entrega
FCA Falkenberg, cargado en camión
Condiciones de pago
100% previo cobro
Dimensiones en planta aprox. (l x w x h)
desconocido
Peso aprox.
1 kg
Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station.

The pictures are from 2011 after commissioning.
Original pictures of the current dismantled state (warehouse service provider) will be submitted later.


Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design
- Suction frame with automatic suction cups
- Motorized roller conveyor
- Dimensions approx. 1000 x 3500 mm
- Load capacity approx. 1000 kg/m
- Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm)
- Unloading conveyor LS (LxW approx. 5120 x 1600 mm)
- Plate dimensions
   - Length approx. 230 - 3200 mm
   - Width of the single plate approx. 220 - 1220 mm
   - Width of the plates in double row approx. 220 - 600 mm
   - Thickness approx. 10 - 60 mm
   - Weight max. 100 kg
- Stack dimensions
   - Height from floor max. approx. 1850 mm
   - Maximum usable height (including sacrificial plate) approx. 1600 mm

Pos. 2 REM OVER RS 20.13 CNC machining center for drilling, milling and grooving
The function of the machining center REM takes place with the plate in the vertical position within the Machine in longitudinal throughput. The lower edge of the panel is guided on the machine's transport chain.

A vertical clamping device that can be moved according to the panel height guarantees a constant Support point of the workpiece with the transport, so the workpiece is during the whole processing guided and controlled in its respective position.

The horizontal clamping device, on the other hand, is used to guide the panel in relation to the panel thickness. In this way, the panel is continuously guided, both in terms of width and thickness, throughout the entire processing cycle.

REM processing units
- Machining spindle 5.5 KW (automatic speed max. 18,000 rpm) and 10-fold tool changer as a turret system

REM machining units drilling with a total of 34 positions, axis Y2
- Motor 4 KW
- 14 drill spindles grid 32 mm in X-direction
- 14 drill spindles grid 32 mm in X-direction
- 6 drilling spindles in a 50 mm grid in the X direction

REM machining units drilling with a total of 14 positions, axis Y22
- Motor 4 KW
- 11 drilling spindles grid 32 mm in Y-direction
- 7 drilling spindles grid 32 mm in X-direction
- Milling unit 5.5 KW with collet

Depositing station 0-90° degrees with transfer device with a length of approx. 3200 mm

Pos. 3 OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station
Workpiece Dimensions
- Length approx. 250 - 3200 mm
- Width approx. 120 - 860 mm
- Thickness approx. 12 - 60 mm

W axis: stroke approx. 3200 mm, speed approx. 20 m/min
X1/2 axis: stroke approx. 800 mm, speed approx. 90 m/min
Z1/2 axis: stroke approx. 40 mm, speed approx. 15 m/min
W2 axis: (positioning of the central beam) stroke approx. 3000 mm, speed approx. 20 m/min
Transport speed approx. 46 - 57.5 - 69 m/min

Horizontal Drilling Unit
The machine is equipped with two electrospindles mounted respectively on the right and left beam.

Dowel Units
The machine is equipped with two dowel units mounted on the right and left beam.
Each unit is complete with vibratory conveyor, dowel glue supply system and dowel dimensions 8x30 mm Mostrar traducción
Traducción automática
Venta directa

¿Tiene alguna pregunta en relación con el artículo? Por favor contáctenos.

10 seguidores
Taladros automáticos de línea REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000
10
Seguidor
a petición
Precio

¿Tiene alguna pregunta en relación con el artículo? Por favor contáctenos.

Nuestros servicios

  • Servicio de desmontaje y montaje
  • Red logística mundial
  • Asesoramiento individualizado
  • Ayuda con la documentación y los trámites aduaneros