Column distance 2100 mm
The machine is equipped with:
- Swivel spindle for 5-sided machining
- Tool changer 36 places
- Chip conveyor
- Internal coolant supply (IKZ)
- Full documentation
It was overhauled, i.e. extensive new parts were installed. The machine has not been used since then.
It turned out that the Z-axis tilts during a swiveling operation of the 2-axis head (A and B axis).
The causes are incorrectly glued coverings on the filler strips, V-ledges and guides.
A deviation of 0.2 mm was measured (inner position 0.0 mm, center pivot position 0.1 mm to the right, outer position 0.1 mm to the left). A professional repair of the Y/Z axis is required.
This information is without guarantee! Further details available in personal meeting with the owner of the machine in case of interest for an on-site inspection.