BRONTO EB-350-50 briketirka

The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. 
The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice.

Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350

• bulk density of the original raw material not less than 120 kg/m3
• feed humidity 4-8 %
• feed fraction 2-8 mm
• briquette density not less than 1000 Kg/m3
• process temperature • K (* C) 423-623
• raw materials in the pressing area (150-350)
• installed power no more, inclusive. kW 46.4 kW
• electric motor of the main engine kW 37 electric motor feeder 2.2 kW
• electric heaters 7.2 kW
• electricity consumption for one hour of extruder, no more than 38 kWh
• specific consumption of 0.11 kWh
• electricity no more than global dimensions, no more than: kg/h
• dimensions (with reception room) mm 3800 x 1200 x 2250 mm
• weight no more than 1600 kg

For additional technical data please see the pdf document Bronto EB-350-50.pdf.